EMI/RFI Filters (LC, RC Networks)
-
Integrated EMI and ESD protection six channel filter onsemi NUF6010MUT2G with 250 MHz cutoff frequency
Product Overview The NUF6010MU is a six-channel (C-R-C) Pi-style EMI filter array with integrated ESD protection. It features typical component values of R = 100 and C = 7 pF, delivering a cutoff frequency of 250 MHz and stop band attenuation greater than -20 dB from 800 MHz to 3.0 GHz. This performance is ideal for parallel interfaces with data rates up to 167 Mbps in applications requiring minimized wireless interference, effectively reducing interference from 2G/3G, GPS,
-
Compact Chip Scale Package L C EMI Filter onsemi CM1418 02CP with RoHS Compliant Lead Free Finish
Product Overview The CM1418 Praetorian is an L-C EMI filter array with integrated ESD protection, designed specifically for headset speakers. It features two Pi-filters (C-L-C) with component values of 117 pF/3.0 nH/117 pF. The device offers a high level of protection against electrostatic discharge (ESD) with diodes capable of dissipating strikes up to 30 kV (IEC61000-4-2 contact discharge and MIL-STD-883 HBM). Its small package and easy pin assignments make it ideal for
-
Compact DFN package EMI filter onsemi NUF8401MNT4G with 175 MHz cutoff frequency and integrated ESD protection
Product Overview The NUF8401MN is an eight-channel (C-R-C) Pi-style EMI filter array with integrated ESD protection. It offers a typical component configuration of R = 100 and C = 12 pF, delivering a cutoff frequency of 175 MHz and stop band attenuation greater than -25 dB from 800 MHz to 2.2 GHz. This performance is ideal for parallel interfaces with data rates up to 117 Mbps, effectively minimizing interference from 2G/3G, GPS, Bluetooth, and WLAN signals. The device
-
onsemi CM1412 03CP dual channel low pass filter array with pi style EMI reduction and ESD protection
Product Overview The CM1412 is a dual, low-pass filter array designed for headset/microphone EMI filtering and ESD protection. It integrates two pi-style filters (C-R-C) to reduce EMI/RFI emissions while safeguarding sensitive electronic components from electrostatic discharge. This device is custom-designed for microphone ports in cellular telephones and similar devices, offering over 35 dB attenuation in the 800 to 2700 MHz range. The filters support bidirectional filtering
-
onsemi NUF6410MNT1G six channel EMI filter with integrated ESD protection and cutoff frequency of 250 MHz
Product Overview The NUF6410MN is a six-channel (C-R-C) Pi-style EMI filter array with integrated ESD protection. It features typical component values of R = 100 and C = 7 pF, providing a cutoff frequency of 250 MHz and stopband attenuation greater than -20 dB from 800 MHz to 3.0 GHz. This performance is ideal for parallel interfaces with data rates up to 167 Mbps, effectively minimizing interference from 2G/3G, GPS, Bluetooth, and WLAN signals. The device is available in a
-
USB filter onsemi STF202-22T1G combining line termination and ESD protection for signal integrity in devices
Product Overview The STF202-22T1G is a USB filter with integrated ESD protection, designed for applications requiring line termination, EMI filtering, and robust electrostatic discharge protection. It offers a cost-effective, single-chip solution that replaces multiple discrete components, saving PCB space and enhancing system reliability. Ideal for upstream USB ports, cellular phones, wireless equipment, and computer peripherals, this device ensures signal integrity and
-
Integrated EMI filter and ESD protection device Nexperia PCMF1HDMI14SZ for HDMI 1.4 applications
Product OverviewCommon-mode ElectroMagnetic Interference (EMI) filters with integrated ElectroStatic Discharge (ESD) protection for one, two, and three differential channels. These devices are engineered to offer low insertion loss for high-speed differential signals while effectively attenuating unwanted common-mode signals. Each differential channel features integrated coils for signal line coupling and diodes for ESD protection up to $\pm15$ kV on each signal line. They
-
High symmetry common mode EMI filter Nexperia PCMF1USB3B/C designed for USB HDMI and mobile internet devices
Nexperia PCMFxUSB3B/C Series Common-mode EMI Filter Common-mode EMI filters with integrated bidirectional ESD protection for one, two, and three differential channels. Designed for low insertion loss on differential high-speed signals while attenuating common-mode noise. Offers ESD protection up to 20 kV on each signal line. Superior common-mode suppression, RF performance, and high symmetry between line pairs. Available in industry-standard Wafer-Level Chip-Scale Packages
-
EMI5208MUTAG onsemi EMI filter array with 8 channels 250 MHz cutoff frequency and Pb free UDFN package
Product Overview The EMI520xMU Series is a family of 4, 6, and 8-channel (C-R-C) Pi-style EMI filter arrays with integrated ESD protection. These devices are designed to minimize wireless interference in parallel interfaces operating at data rates up to 167 Mbps. With typical component values of R = 100 and C = 7 pF, they offer a cutoff frequency of 250 MHz and provide stop band attenuation greater than 20 dB from 800 MHz to 5.0 GHz, effectively mitigating interference from
-
Nexperia IP4252CZ8-4-TTL 13 four channel RC low pass filter array with ESD protection and QFN package
Product OverviewThe IP4251/52/53/54-TTL are 4-, 6-, and 8-channel RC low-pass filter arrays designed to filter undesired RF signals on I/O ports of portable communication and computing devices. They integrate diodes for ElectroStatic Discharge (ESD) protection up to 30 kV. Fabricated using monolithic silicon technology, these devices feature up to eight resistors and sixteen diodes within an ultra-thin leadless Quad Flat No-leads (QFN) plastic package with a 0.4 mm pitch and
-
High Reliability EMI Filter Array onsemi CM1683-02DE Designed for Headset Speakers in Portable Devices
Product Overview The CM1683 Praetorian is an L-C EMI filter array with integrated ESD protection, specifically designed for headset speakers in portable electronics. It features two Pi-filters (C-L-C) with component values of 100 pF - 3 nH - 100 pF, providing effective EMI filtering and robust ESD protection. The device offers 8 kV ESD protection (IEC 61000-4-2, Contact Discharge) and 15 kV ESD protection (HBM), safeguarding sensitive components from electrostatic discharge.
-
Compact UDFN package onsemi EMI7208MUTAG EMI filter with integrated ESD protection and low profile design
Product Overview The EMI720xMU Series is a family of LC EMI filters with integrated ESD protection, designed to minimize wireless interference in parallel interfaces. Featuring typical component values of L = 17 nH and C = 12 pF, these filters deliver a cutoff frequency of 250 MHz and provide stop band attenuation greater than -23 dB from 800 MHz to 6.0 GHz. This performance is ideal for applications with data rates up to 125 Mbps, effectively reducing interference from 2G/3G
