EMI/RFI Filters (LC, RC Networks)
-
Compact flip chip EMI filter array onsemi NUF6105FCT1G with six channel design and ESD protection features
Product Overview The NUF6105FC is a six-channel (C-R-C) Pi-style EMI filter array with integrated ESD protection. It features typical component values of R = 100 and C = 27 pF, offering a cutoff frequency of 100 MHz and stop band attenuation greater than -35 dB from 800 MHz to 2.2 GHz. This performance is ideal for parallel interfaces with data rates up to 67 Mbps, effectively minimizing wireless interference from 2G/3G, GPS, Bluetooth, and WLAN signals. The device is
-
Compact USB upstream terminator onsemi NUF2221W1T2G with integrated EMI filtering and ESD protection
Product Overview The NUF2221W1 is a USB upstream terminator designed to provide line termination, EMI filtering, and ESD protection for USB ports. It offers an integrated solution in a compact SC-88/SOT-363 package, reducing PCB space and cost. This device is ideal for upstream USB ports, cellular phones, wireless equipment, and computer applications, ensuring compliance with IEC61000-4-2 (Level 4) ESD standards. Its bi-directional filtering prevents noise from entering or
-
Nexperia PCMF2USB3BA CZ common mode EMI filter designed for USB3 2 HDMI and mobile device applications
PCMFxUSB3BA/C Series Common-Mode EMI FilterCommon-mode EMI filters with integrated bidirectional ESD protection for one, two, and three differential channels. Designed to provide low insertion loss for differential high-speed signals while attenuating unwanted common-mode signals. Each differential channel has two signal lines coupled by integrated coils. Diodes offer ESD protection up to 15 kV on each signal line. Superior common-mode suppression, RF performance, and high
-
data line EMI filter onsemi CM6400A with integrated ESD protection and 5 by 5 millimeter CSP package
Product Overview The CM6400A is a 24-bump EMI filter with integrated ESD protection, designed for data line applications. It features a compact 0.4 mm pitch, 5 x 5 mm CSP form factor and is fully compliant with IEC 61000-4-2 Level 4 standards. This device is Pb-Free and RoHS II compliant, making it suitable for modern electronic designs requiring robust signal integrity and protection. Product Attributes Brand: onsemi Product Series: CM6400A Compliance: IEC 61000-4-2 Level 4,
-
Compact chip scale EMI filter onsemi CM1402-03CP designed for SIM card slots and portable electronic applications
Product Overview The CM1402 is an EMI filter array with integrated ESD protection, designed to protect sensitive electronic components. It features three pi filters (C-R-C) with component values of 20 pF - 47 - 20 pF and 20 pF - 100 - 20 pF, alongside two additional channels of ESD protection. The device incorporates avalanche-type ESD diodes on every pin, capable of dissipating ESD strikes of 10 kV per IEC 61000-4-2 and 25 kV per MIL-STD-883 (Human Body Model). Its small
-
EMI suppression and ESD protection solution Nexperia PCMF3HDMI2BA-CZ for differential data lines
Product OverviewThe PCMFxHDMI2BA-C series are common-mode EMI filters with integrated bidirectional ESD protection for differential channels. They are designed to attenuate unwanted common-mode signals while providing low insertion loss for differential high-speed signals. Each channel consists of two signal lines coupled by integrated coils, and integrated diodes offer ESD protection up to 15 kV on each signal line. These filters are suitable for applications requiring
-
Dual low pass filter array onsemi CM1411-03CP with emi rfi reduction and 8 kV esd protection rating
Product Overview The CM1411 is a dual, low-pass filter array designed for speaker ports in cellular telephones and similar devices. It integrates two pi-style filters (C-R-C) to reduce EMI/RFI emissions while providing robust Electrostatic Discharge (ESD) protection. Each filter offers over 35 dB attenuation in the 800 to 2700 MHz range and supports bidirectional filtering. With a cutoff frequency of 31 MHz, it passes AC audio signals without distortion. The CM1411 provides
-
EMI filter array onsemi NUF4403MNT1G with 105 MHz cutoff frequency and DFN8 surface mount package
Product Overview The NUF4403MN is a four-channel (C-R-C) Pi-style EMI filter array with integrated ESD protection. Featuring typical component values of R = 100 and C = 17 pF, it delivers a cutoff frequency of 105 MHz and stop band attenuation greater than -35 dB from 800 MHz to 2.2 GHz. This performance is ideal for parallel interfaces with data rates up to 70 Mbps in applications requiring minimized wireless interference, effectively reducing interference from 2G/3G, GPS,
-
Integrated common mode EMI filter and ESD protection device Nexperia PCMF1USB3BA/CZ for USB 3 data lines
Product OverviewThe PCMFxUSB3BA/C series are common-mode EMI filters with integrated bidirectional ESD protection for differential channels. They are designed to attenuate unwanted common-mode signals while providing low insertion loss for high-speed differential signals. Each channel includes integrated coils for signal line coupling and diodes for ESD protection up to 15 kV. These filters are ideal for protecting downstream components in various high-speed data interfaces
-
EMI7206MUTAG onsemi EMI filter designed to minimize interference in parallel interface applications
Product Overview The EMI720xMU Series is a family of LC EMI filters with integrated ESD protection, designed to minimize wireless interference in parallel interfaces. Featuring component values of L = 17 nH and C = 12 pF, these filters deliver a cutoff frequency of 250 MHz and provide stop band attenuation greater than -23 dB from 800 MHz to 6.0 GHz. This performance is ideal for applications with data rates up to 125 Mbps, effectively reducing interference from 2G/3G, GPS,
-
onsemi CM1492-06DE Six Channel EMI Filter Array with Pi Style Network and IEC 61000-4-2 Level 4 ESD Protection
Product Overview The Praetorian L-C LCD and Camera EMI Filter Array with ESD Protection, model CM1492-06DE, offers robust EMI filtering and integrated ESD protection for sensitive LCD and camera data lines in mobile and wireless handsets. It features six channels of Pi-style EMI filters (capacitor-inductor-capacitor network) providing greater than 30dB attenuation at 1GHz. Each channel is equipped with 15kV ESD protection (contact discharge per IEC 61000-4-2 Level 4) and 30kV
-
EMI Filter Array onsemi CM1426-08CP with 230 MHz Cutoff Frequency and Enhanced ESD Protection Features
onsemi CM1426: EMI Filter Array with ESD Protection The onsemi CM1426 is a family of pi-style EMI filter arrays designed to provide robust Electrostatic Discharge (ESD) protection for sensitive electronic components. Integrating four, six, or eight C-R-C filter channels within a compact Chip Scale Package (CSP) with a 0.50 mm pad pitch, the CM1426 offers a high level of integration for space-constrained applications. Each channel features component values of 8.5 pF - 100 - 8
