<
>
Specifications
Current - Saturation (Isat):
10A
Mfr. Part #:
MMPC0503H-1R5MT
Package:
SMD,5.7x5.2mm
Key Attributes
Model Number:
MMPC0503H-1R5MT
Product Description
Product Overview
The MMPC0503H Series High Current Molded Power Inductors are designed for high-efficiency applications requiring compact size and low DCR. Utilizing carbonyl powder, these inductors offer high current handling capabilities and operate effectively up to 5MHz. They are engineered for very low acoustic and leakage flux noise, making them suitable for demanding power systems, including PC power systems and DC/DC converters.
Product Attributes
- Brand: Metal-lions
- Core Material: Carbonyl Powder
- Wire Material: Polyester Wire or equivalent
- Clip Material: 100% Pb free solder (Ni+Sn---Plating)
- Paint Material: Epoxy resin
- Ink Material: Halogen-free ketone
- Compliance: RoHS compliant
- Operating Temperature Range: -40125 (Including self temp. rise)
Technical Specifications
| Part Number | Inductance (uH) 20% | I rms (A) Typ | I sat (A) Typ | DCR (m) Max |
|---|---|---|---|---|
| MMPC0503H-R10YT | 0.1030% | 23.0 | 27.0 | 3.00 |
| MMPC0503H-R15YT | 0.1530% | 18.0 | 30.0 | 2.70 |
| MMPC0503H-R22MT | 0.22 | 15.5 | 21.0 | 4.40 |
| MMPC0503H-R33MT | 0.33 | 14.0 | 18.0 | 5.00 |
| MMPC0503H-R47MT | 0.47 | 12.0 | 16.0 | 7.40 |
| MMPC0503H-R56MT | 0.56 | 10.0 | 15.0 | 10.0 |
| MMPC0503H-R68MT | 0.68 | 8.50 | 14.0 | 12.0 |
| MMPC0503H-R82MT | 0.82 | 8.00 | 12.5 | 13.0 |
| MMPC0503H-1R0MT | 1.00 | 7.00 | 11.0 | 14.0 |
| MMPC0503H-1R5MT | 1.50 | 6.00 | 10.0 | 25.0 |
| MMPC0503H-2R2MT | 2.20 | 5.50 | 9.00 | 35.0 |
| MMPC0503H-3R3MT | 3.30 | 5.00 | 8.00 | 38.0 |
| MMPC0503H-4R7MT | 4.70 | 4.60 | 6.00 | 53.0 |
| MMPC0503H-5R6MT | 5.60 | 4.25 | 4.50 | 63.0 |
| MMPC0503H-6R8MT | 6.80 | 4.00 | 4.30 | 76.2 |
| MMPC0503H-100MT | 10.0 | 2.75 | 3.50 | 128 |
| MMPC0503H-150MT | 15.0 | 2.10 | 2.60 | 190 |
| MMPC0503H-220MT | 22.0 | 1.90 | 1.70 | 250 |
| MMPC0503H-330MT | 33.0 | 1.60 | 1.60 | 440 |
| Dimensions (mm) | L | G | H |
|---|---|---|---|
| Nominal | 6.2 | 2.2 | 2.8 |
| A | 5.70.3 | B | 5.20.2 |
| C | 2.80.2 | D | 1.10.3 |
| E | 1.50.3 |
Applications
- PC power system, incl. IMVP-6
- DC/DC converter
Reliability and Test Conditions
| Item | Performance Test Condition |
|---|---|
| Operating temperature | -40~+125 (Including self-temperature rise) |
| Storage temperature | 1. -10~+40, 50~60%RH (Product without taping) 2. -40~+125 (on board) |
| Electrical Performance Test | Inductance: Refer to standard electrical characteristics list. DCR: Refer to standard electrical characteristics list. Saturation Current (Isat): Approximately L30%. Heat Rated Current (Irms): Approximately T40. |
| Life Test | Preconditioning: Run through IR reflow for 3 times. Temperature: 1252 (Inductor, ambient + temp rise) Applied current: rated current Duration: 100012hrs |
| Load Humidity | Preconditioning: Run through IR reflow for 3 times. Humidity: 852% RH, Temperature: 852 Duration: 1000hrs |
| Moisture Resistance | Preconditioning: Run through IR reflow for 3 times. Test sequence includes baking, humidity exposure, and thermal cycling. |
| Thermal shock | Preconditioning: Run through IR reflow for 3 times. Condition for 1 cycle: -402 (305min) to 1252 (0.5min) then 1252 (305min). Number of cycles: 500 |
| Vibration | Preconditioning: Run through IR reflow for 3 times. Oscillation Frequency: 10Hz2KHz10Hz for 20 minutes Total Amplitude: 10g Testing Time: 12 hours (20 minutes, 12 cycles each of 3 orientations) |
| Bending | Component mounted on FR4 substrate. Bending depth: >=0805 inch(2012mm):1.2mm, <0805 inch(2012mm):0.8mm. Duration of 10 sec. |
| Shock | 3 shocks in each direction along 3 perpendicular axes (18 shocks). Peak value (g's): 50, Normal duration (D) (ms): 11, Wave form: Half-sine. |
| Soldering Iron | Preheat circuit and products to 150. Use a 20 watt soldering iron with tip diameter of 1.0mm. 355 tip temperature (max). Limit soldering time to 4~5sec. Times: 1 time max. |
| Reflow Soldering | Recommended temperature profiles in Figure 1. Times: 3 times max. |
| Solderability | More than 95% of the terminal electrode should be covered with solder. |
| Resistance to Soldering Heat | Preconditioning: Run through IR reflow for 3 times. Test Method B1: 4 hrs @155C dry heat @255C5C, Test time: 5 +0/-0.5 seconds. Test Method D: @260C5C, Test time: 30 +0/-0.5 seconds. |
| Terminal Strength | Preconditioning: Run through IR reflow for 3 times. Apply a force (>0805inch(2012mm):1kg, <=0805inch(2012 mm):0.5kg) to the side of a device for 60 +1 seconds. |
Packaging Information
| Type | A(mm) | B(mm) | C(mm) | D(mm) | Chip / Reel |
|---|---|---|---|---|---|
| 13x12mm | 12.4+2/-0 | 1002 | 13+0.5/-0.2 | 330 | 2000 |
Application Notice
- Storage Conditions (component level): Maintain solderability of terminal electrodes. Temperature and humidity conditions: Less than 40 and 60% RH. Recommended products should be used within 12 months from the time of delivery. Packaging material should be kept where no chlorine or sulfur exists in the air.
- Transportation: Handle with care to avoid damage or contamination. Use of tweezers or vacuum pick up is strongly recommended. Bulk handling should minimize abrasion and mechanical shock.
2507081835_MetalLions-MMPC0503H-1R5MT_C49308498.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
