<
>
Specifications
Capacitance:
100nF
Operating Temperature:
-40℃~+110℃
Voltage(AC):
350V
Tolerance:
±10%
Mfr. Part #:
PX104K2H1001
Package:
Through Hole,P=10mm
Key Attributes
Model Number:
PX104K2H1001
Product Description
Product Overview
This specification covers the requirements for KEYA Metallized Polypropylene Film AC Capacitors, specifically designed as Interference Suppressors Class-X2. These capacitors are intended for use in applications requiring suppression of electromagnetic interference in power supplies.
Product Attributes
- Brand: KYET ()
- Origin: Dongguan, China
- Material: Metallized Polypropylene Film
- Color: Grey ()
- Certifications: cULus, ENEC, CQC
Technical Specifications
| KYET P/N | Capacitance (uF) | Tolerance (%) | Rated Voltage (VAC) | Dimensions (mm) WxHxT | Lead Pitch (P) | Lead Diameter (d) | Lead Length (L) Min | Color |
|---|---|---|---|---|---|---|---|---|
| PX104K2H1001 | 0.1 | 10% | 350 | 13x14x8.0 | 10 | 0.6 | 18 | Grey |
| Item | Description | Test Conditions |
|---|---|---|
| Scope | This specification applies to KEYA Metallized Polypropylene Film AC Capacitor (Interference Suppressors Class-X2). | |
| Standard Atmospheric Conditions | Ambient Temperature: 15 to 35 (20 5 for doubt) Relative Humidity: 45% to 75% (60% to 70% for doubt) Air Pressure: 86 kPa to 106 kPa | |
| Operating Temperature Range | -40 to +110 (continuous operation at rated voltage) | |
| Construction | Dielectric: Metallized Polypropylene Film Metal Spray: Special Solder Lead Wire: Tinned Copper-clad Steel Wire Epoxy Resin: UL 94V-0 Flame Retardant Plastic Case: UL 94V-0 Flame Retardant | |
| Marking | Manufacturer Symbol, Type, Class (X2), Capacitance (EIA 3-digit code), Tolerance (J, K, M), Rated Voltage (310-350-380V), Climatic Category (40/110/21/B), Approval Marks (cULus, ENEC, CQC), Manufacture Code. | |
| Withstand Voltage | Between Terminals: 4.3*Ur (DC) for 60 sec Between Terminals & Enclosure: 2*Ur+1,500VAC (min. 2,000VAC) for 2 to 5 sec | |
| Dissipation Factor (DF) | 0.001 (0.1%) at 1 KHz | Measuring Frequency: 2% Measuring Voltage: 1 Vrms |
| Capacitance (CAP) | Within the tolerance specified | Measuring Frequency: 2% Measuring Voltage: 1 Vrms |
| Insulation Resistance (I.R.) | 15,000 M (C0.33uf) 5,000 M*uF/C (C>0.33uf) | Vt=100 VDC Charge Time: 605 sec. |
| Soldering Property | More than 90% of circumferential surface of lead wire shall be covered with new solder. | Soldering temperature: +235 5 Immersion duration: 2 0.5 sec |
| Terminal Strength | Shall be no abnormality. | Apply 1.0Kg for 10 1 sec. to the terminal in the axial direction and acting in a direction away from the body. |
| Temperature Cycle | Appearance: Shall be no remarkable change Withstand Voltage: Shall satisfy NO.5.1 Capacitance Change Rate: Within 5% Dissipation Factor: 0.002 (0.2%) max. @ 1KHz Insulation Resistance: 50% of the limit value of NO.5.4 | Total 5 cycles: -40 to +110 After test, allow 1.5 0.5 Hrs. at ordinary condition. |
| Dry Heat Resistance | Appearance: Shall be no remarkable change Withstand Voltage: Shall satisfy NO.5.1 Capacitance Change Rate: Within 5% Dissipation Factor: 0.002 (0.2%) max. @ 1KHz Insulation Resistance: 50% of the limit value of NO.5.4 | Test Temperature: +110 2 Test Duration: 16 + 1/-0 hrs. |
| Cold Resistance | Appearance: Shall be no remarkable change Withstand Voltage: Shall satisfy NO.5.1 Capacitance Change Rate: Within 5% Dissipation Factor: 0.002 (0.2%) max. @ 1KHz Insulation Resistance: 50% of the limit value of NO.5.4 | Test Temperature: -40 3 Test Duration: 2 1 hrs. |
| Damp Heat | Appearance: Shall be no remarkable change Withstand Voltage: Shall satisfy NO.5.1 Capacitance Change Rate: Within 5% Dissipation Factor: 0.002 (0.2%) max. @ 1KHz Insulation Resistance: 50% of the limit value of NO.5.4 | Test Temperature: +40 2 Test Humidity: 90% to 95% R.H. Test Duration: 21 days. After test, allow 1.5 0.5 Hrs. at ordinary condition. |
| Vibration Resistance | Appearance: Shall be no mechanical damage. Connection strength: Shall be no short-circuiting or open. The connection shall be stable. | Frequency Change: 10-55-10 Hz Vibration Distance: 1.5 mm. Test Direction: X,Y,Z Test Duration: 2+1/-0 hrs each direction |
| Soldering Heat Resistance | Appearance: Shall be no remarkable change. The marking shall be legible. Connection of Element: Shall be stable. | Preheat Temp.: 100~120, 60 sec. max. Soldering Temperature: +260 5 Immersion Duration: 5 1sec. Immersion Depth: 4 0.8mm from roots. After test, allow 1.5 0.5 Hrs. at ordinary condition. Withstand Voltage Between Terminals: Shall satisfy NO.5.1 Capacitance Change Rate: Within 3% Dissipation Factor: 0.002 (0.2%) max. @ 1KHz Insulation Resistance: 50% of the limit value of NO.5.4 |
| Endurance | Appearance: Shall be no remarkable change Withstand Voltage: Shall satisfy NO.5.1 Capacitance Change Rate: Within 10% Dissipation Factor: 1uF: 0.008 (0.8%) max. >1uF: 0.005 (0.5%) max. @ 1KHz Insulation Resistance: 50% of the limit value of NO.5.4 | Test Temperature: +110 2 Test Voltage: 1.25 * rated voltage. Test Duration: 1,000 Hrs. Once every hour voltage increased to 1000 V rms for 0.1 sec. applied individually through a 475 % resistor. |
| High Temperature High Humidity | Appearance: Shall be no remarkable change Withstand Voltage: Shall satisfy NO.5.1 Capacitance Change Rate: Within 5% Dissipation Factor: 0.002 (0.2%) max. @ 1KHz Insulation Resistance: 50% of the limit value of NO.5.4 | Test Temperature: +85 2. Test Humidity: 85% 2% R.H. Test Voltage: 240VAC Test Duration: 1000 Hrs. After test, allow 1.5 0.5 Hrs. at ordinary condition. |
2411220025_KYET-PX104K2H1001_C41369590.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
