<
>
Specifications
Current Rating:
110mA
Inductance:
1mH
Tolerance:
±10%
Frequency - Self Resonant:
-
DC Resistance(DCR):
14Ω
Type:
Color Band Inductor
Current - Saturation(Isat):
-
Q @ Frequency:
40@0.796MHz
Mfr. Part #:
ZEAL0410-102
Package:
Through Hole,D4xL10mm
Key Attributes
Model Number:
ZEAL0410-102
Product Description
Product Overview
This document specifies the ZEAL0410-102 Fixed Inductor from Dongguan ZengYi Industrial Co., LTD. It is a color ring inductor designed for various electronic applications. The product is manufactured with high-quality materials and undergoes rigorous testing to ensure reliability and performance.
Product Attributes
- Brand: (ZengYi)
- Origin: Dongguan, China
- Material: Core (FC1), Winding Wire (2UEW), Epoxy Resin, PNI
- Certifications: ROHS Yes
- Color Ring: Brown, Black, Red, Silver
Technical Specifications
| Model | Description | Inductance (L) | Q Factor | DCR () | Rated DC Current (mA) | Test Frequency | Rated Voltage | Turns | Core Material | Wire Material | Insulation Resistance | Withstand Voltage |
| ZEAL0410-102 | Fixed Inductor (Color Ring Inductor) | 1.0 10% mH | 50 Min | 14 m | 110 mA | 1KHz/0.25V | 248 Ts (REF) | FC1 | 2UEW 0.07mm | Over 100M at 500V, 3SEC | AC 500V for one minute |
Electrical Schematics
Refer to the provided diagram for electrical schematics.
Shape & Dimension (Unit: m/m)
A: 10.0MAX, B: 0.60.1, C: 622, D: 4.0MAX, E: , F:
Material List
| No | Item | Material | Vendor | Rating | UL File | ROHS state |
| 1 | CORE | FC1 36 | FCI HENGCI | 150 | Yes | |
| 2 | WIRE WINDING | 2UEW 0.07mm | HOILUEN | 130 | EI64409 | Yes |
| 3 | EPOXY RESIN | NC-G | homeTown | 200 | Yes | |
| 4 | PNI | 0.6 CP | BAI CHUAN | 130 | Yes |
Test Data for Preproduction Sample
| MEAS.ITEM | L (mH) | Q | DCR |
| SPEC | 1.0010% | 14.0MA | 50MIN X |
| 1 | 1.01 | 60 | 11.4 |
| 2 | 1.01 | 61 | 11.1 |
| 3 | 0.99 | 58 | 11.5 |
| 4 | 1.01 | 58 | 11.5 |
| 5 | 1.02 | 63 | 11.8 |
| 6 | 1.01 | 62 | 11.5 |
| 7 | 1.00 | 57 | 11.8 |
| 8 | 1.01 | 62 | 11.4 |
| 9 | 1.03 | 58 | 11.6 |
| 10 | 1.01 | 60 | 11.4 |
Test Condition: TEMP: 25(REF.) R.H.: 60%(REF.)
Reliability Test Method
Mechanical Test
| ITEM | SPECIFICATION | TEST DETAILS |
| Terminal pull strength | 9.8(N)MIN | A pulling load should be gradually applied to the leads in a downward direction and should be monitored the value at the point of destroy. |
| Terminal bending strength | 1CYCLE MIN | A specified load of 4.9(N) should be suspended, From the terminal then slowly inclined the 90, and then return to normal position ,The consecutive bends shall be done in the opposite directions.(Total 1 cycle) |
| Dropping | L/L05% Q/Q020% There is no evidence of any mechanical failures | The sample shall be dropped on a concrete floor once from 1 meter height (39 inches) Total 3 cycles. |
| Vibration | L/L05% Q/Q020% There is no evidence of any mechanical failures | |
| Resistance to soldering heat | There is no evidence of any mechanical failures | The sample should be immersed to a depth of 1.5mm below the lower core surface into solder at a temperature of 260(+10,-0)for a duration of 5seconds(+1,-0). |
Electrical Test
| ITEM | SPECIFICATION | TEST DETAILS |
| Insulation Resistance | The insulation resistance between core to coil is over 100M at500V,3SEC. | |
| Withstand Voltage | Apply AC 500V between core to coil for one minute there shall not be any abnormality. |
Environment Characteristics
| ITEM | SPECIFICATION | TEST DETAILS |
| High temperature storage | L/L05% Q/Q025% There is no evidence of any mechanical failures | The coil should be stored at an ambient temperature of +852for 72 hours ,after which the measurement should be made. |
| Low temperature storage | L/L05% Q/Q025% There is no evidence of any mechanical failures | The coil should be stored at an ambient temperature of -402for 500 hours ,after which the measurement should be made. |
| Thermal shock | L/L05% Q/Q030% There is no evidence of any mechanical failures | |
| Humidity life test | L/L05% Q/Q030% There is no evidence of any mechanical failures | The rated current shall be applied to the coil at an ambient temperature +402with relative humidity of 90% for 1000 hours. |
Safety Test
| ITEM | SPECIFICATION | TEST DETAILS |
| Over load test | No abnormal smoking or fire | The twice current of the rated dc current should be applied to the coil for 5 min |
2410141543_ZE-ZEAL0410-102_C3040867.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
