<
>
Specifications
Current Rating:
160mA
Inductance:
330uH
Tolerance:
±10%
Frequency - Self Resonant:
-
DC Resistance(DCR):
2.5Ω
Ratings:
-
Type:
Color Band Inductor
Q @ Frequency:
30@0.796MHz
Current - Saturation(Isat):
-
Mfr. Part #:
ALH0510-331K-LFD
Package:
Through Hole
Key Attributes
Model Number:
ALH0510-331K-LFD
Product Description
Product Overview
This document specifies the ALH0510-331K-LFD, a color ring inductor with a 330uH inductance, 1W power rating, and a vertical dual K-foot design. It is suitable for applications requiring fixed inductors.
Product Attributes
- Brand: (Zeny Industrial)
- Origin: Dongguan, China
- Material: CORE D6 4x6, WIRE WINDING 2UEW 0.12mm, EPOXY RESIN NC-G, PNI 0.5 CP
- Color: Orange (body), Brown (band), Silver (band)
- Certifications: ROHS (Yes)
Technical Specifications
| Part Number | Description | Inductance (L) | Q Factor (Q) | DCR | Rated DC Current | Test Frequency | Test Instruments | Dimensions (mm) |
|---|---|---|---|---|---|---|---|---|
| ALH0510-331K-LFD | Color Ring Inductor 0510, 330uH, 1W, Vertical Dual K-foot | 330±10% uH | 30 Min | 2.5 Max Ω | 160 MAX mA | 1KHz/0.25V, 0.796MHz/1V | HP-4285A, 502BC | A: 5.0MAX, B: 5.0±0.5, C: 10.0MAX, D: 0.5±0.05, E: 14.5 MAX, F: 16.0±1.0 |
Material List
| Item | Material | Vendor | Rating | UL File | ROHS State |
|---|---|---|---|---|---|
| CORE | D6 4x6 | HENGCI or equivalent | 150 | Yes | |
| WIRE WINDING | 2UEW Φ0.12mm TURNS:138T (REF) | HOILUEN | 130 | EI64409 | Yes |
| EPOXY RESIN | NC-G | homeTown | 200 | Yes | |
| PNI | Φ0.5 CP | BAI CHUAN | 130 | Yes |
Reliability Test Method
| Category | Test Item | Specification | Test Details |
|---|---|---|---|
| Mechanical Test | Terminal pull strength | 9.8(N)MIN | A pulling load should be gradually applied to the leads in a downward direction and should be monitored the value at the point of destroy. |
| Terminal bending strength | 1CYCLE MIN | A specified load of 4.9(N) should be suspended, From the terminal then slowly inclined the 90, and then return to normal position ,The consecutive bends shall be done in the opposite directions.(Total 1 cycle) | |
| Dropping | ΔL/L0≤±5%, ΔQ/Q0≤±20%, No mechanical failures | The sample shall be dropped on a concrete floor once from 1 meter height (39 inches) Total 3 cycles. | |
| Vibration | ΔL/L0≤±5%, ΔQ/Q0≤±20%, No mechanical failures | ||
| Electrical Test | Resistance to soldering heat | No mechanical failures | The sample should be immersed to a depth of 1.5mm below the lower core surface into solder at a temperature of 260(+10,-0)for a duration of 5seconds(+1,-0). |
| Insulation Resistance | Over 100MΩ at 500V, 3SEC | The insulation resistance between core to coil is over 100MΩ at 500V,3SEC. | |
| Withstand Voltage | Apply AC 500V between core to coil for one minute there shall not be any abnormality. | Apply AC 500V between core to coil for one minute there shall not be any abnormality. | |
| Environment Characteristics | High temperature storage | ΔL/L0≤±5%, ΔQ/Q0≤±25%, No mechanical failures | The coil should be stored at an ambient temperature of +85±2for 72 hours ,after which the measurement should be made. |
| Low temperature storage | ΔL/L0≤±5%, ΔQ/Q0≤±25%, No mechanical failures | The coil should be stored at an ambient temperature of -40±2for 500 hours ,after which the measurement should be made. | |
| Thermal shock | ΔL/L0≤±5%, ΔQ/Q0≤±30%, No mechanical failures | ||
| Humidity life test | ΔL/L0≤±5%, ΔQ/Q0≤±30%, No mechanical failures | The rated current shall be applied to the coil at an ambient temperature +40±2with relative humidity of 90% for 1000 hours. | |
| Safety Test | Over load test | No abnormal smoking or fire | The twice current of the rated dc current should be applied to the coil for 5 min |
2410121613_ZE-ALH0510-331K-LFD_C967671.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
