<
>
Specifications
Current Rating:
100mA
Inductance:
1mH
Tolerance:
±10%
Frequency - Self Resonant:
1MHz
DC Resistance(DCR):
12Ω
Type:
Color Band Inductor
Q @ Frequency:
50@0.252MHz
Mfr. Part #:
ZEAL0510-1mH/K
Package:
Through Hole,D5xL10.5mm
Key Attributes
Model Number:
ZEAL0510-1mH/K
Product Description
Product Overview
The ZEAL0510-1mH/K is a compact, small, and lightweight axial fixed inductor designed for a wide range of inductance values. It features high Q and self-resonant frequencies, is suitable for automatic insertion due to its taping type, and offers long life with humidity resistance due to its epoxy resin coating. It is ideal for various electronic products including TVs, radios, radio transceivers, and telephones.
Product Attributes
- Brand: (ZEAL)
- Origin: (Dongguan Zengyi Industrial Co., Ltd.)
- Material Type: (Color Ring Inductor)
- Model Series: AL0510 Series
- Customer Model: ZEAL0510-1mH/K
- Version: A
Technical Specifications
| Part Number | Inductance (uH) | Q (Min) | Frequency (MHz) | DCR (Max) () | SRF (Min) (MHz) | Rated Current (Max) (mA) |
|---|---|---|---|---|---|---|
| ZEAL0510-1mH/K | 1000 10% | 50 | 0.252 | 12 | 1 | 110 |
Features
- Design to be compact, small and light-weight, wide range of inductance.
- Contribute to be high Q and self-resonant frequencies, tapping type that is convenient for automatic insertion, coating epoxy resin that ensure the humidity resistance to be long life.
Applications
- For TV, radios and radio transceivers, telephones.
- Other various electronic products.
Color Coding
| Color | Nominal Inductance (uH) | Tolerance | ||
|---|---|---|---|---|
| 1st Figure | 2nd Figure | Multiplier | ||
| Black | 0 | 0 | 1 | 20% |
| Brown | 1 | 0 | 10 | |
| Red | 2 | 0 | 100 | |
| Orange | 3 | 0 | 1000 | |
| Yellow | 4 | 0 | ||
| Green | 5 | 0 | ||
| Blue | 6 | 0 | ||
| Violet | 7 | 0 | ||
| Gray | 8 | 0 | ||
| White | 9 | 0 | ||
| Gold | 0.1 | 5% | ||
| Silver | 0.01 | 10% |
Appearance Dimensions
| Type | Dimension (mm) | A (Max) | B (Max) | C* (0.1) |
|---|---|---|---|---|
| AL0204 | 2.8 x 4.8 | 0.45 | ||
| AL0307 | 3.0/3.2 x 7.0 | 0.50 | ||
| AL0410 | 4.0 x 10.5 | 0.60 | ||
| AL0412 | 4.5/5.0 x 12.7 | 0.65 | ||
| AL0510 | 5.0 x 10.5 | 0.60 | ||
| AL0512 | 5.0 x 12.0 | 0.60 | ||
| AL0514 | 5.0/5.5 x 14.0/15.0 | 0.65 |
*C depends on the actual situation.
Reliability Test Items and Requirements
| Item | Specification | Test Methods and Remarks |
|---|---|---|
| Operating temperature range | -25+85 | |
| Storage temperature range | +5+35 | |
| Appearance & dimensions | Conformity to the product specification | Eyeball; vernier calliper with precision no lower than 0.02mm |
| Inductance, Q value | Within the specified tolerance | Condition: at specified test frequency. Test equipment: HP4285A |
| DC resistance | Within the specified tolerance | Test equipment: HP4338B |
| Self-resonance frequency | Within the specified tolerance | Test equipment: RF/Impedance Material Analyzer HP4291A |
| Rated current | Within the specified tolerance | The maximum DC value having inductance within 10% and temperature increase within 20 by the application of DC bias. |
| Terminal strength | No visible damage, lead no breakage. | Pull: adding 2kgf down axial, Duration: 5s. Bucking cycle: buck lead 90at the end of closing terminal and then reset keeping 5s, redoing one time at the counter is one cycle. Repeat two times. |
| Resistance to soldering heat | L/L 5%, Q/Q 20% | Soldering temperature: 2705, Duration: 101s, Recovery: 12 hours |
| Solder ability | Leads shall be at least 95% areas covered with a new solder coating. | Soldering temperature: 2505, Duration: 20.5s |
| Resistance to solvent | No visible damage to marking. | Solvent temperature: 255. Place cotton ball and sample in solvent for 1 min, wipe marking area 3 times with cotton ball. |
| Dielectric Withstanding Voltage | No arc, breakdown or damage. | Apply 500VDC between outer coating and terminal for 60sec. |
| Insulation resistance | IR100M | Apply 500VDC between outer coating and terminal for 60sec. |
| Temperature characteristic | L/L 5%, Q/Q 20% | Measurement shall be made at an ambient temp of 25+85, reference inductance shall be measured at 20. |
| High temperature life test | L/L 10%, Q/Q 30% | Test temperature: 852, Time: 96 hours |
Notes:
- In the event of no special requirement, the measurement shall be conducted immediately after a recovery of 1~2 hours under the standard condition.
- In the event of any dispute, the standard condition for arbitration shall be as follows: 251 of temperature, 48%~52% RH and 86~106kPa air pressure.
Packaging Style
Taping Dimensions
| Tape style | L | Z | |L1-L2| | Tape width | Unit |
|---|---|---|---|---|---|
| 26 | 0.8 Max | 1.0 Max | 26 1.0 | mm | |
| 52 | 1.2 Max | 52 +2.0 / -1.0 | mm |
Ammo Packaging Dimensions
Box Dimensions
| Tape type | Dimensions (5mm) | A | B | C |
|---|---|---|---|---|
| 52 | 75 | 85 | 256 | |
| 26 | 50 | 110 | 256 |
Packaging Quantity
| Packaging Style | Quantity |
|---|---|
| Ammo | 1000 |
| Tape & reel | 2500 |
| Bulk | 1000 |
Packaging according to customers requirement.
2504101957_ZE-ZEAL0510-1mH-K_C46634778.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
