<
>
Specifications
Inductance @ Frequency:
1mH@100KHz
Impedance @ Frequency:
1.4kΩ@40MHz
Number of Lines:
2
DC Resistance(DCR):
180mΩ
Operating Temperature:
-20℃~+125℃
Current Rating:
950mA
Voltage Withstand:
1kV
Mfr. Part #:
YLCM1006C-102T
Package:
SMD,10x8.7mm
Key Attributes
Model Number:
YLCM1006C-102T
Product Description
Wire Wound Common Mode Choke - YLCM1006C Series
The YLCM1006C Series is a wire wound common mode choke designed with SMD construction and a low profile. It offers high impedance, excellent frequency characteristics, self-electromagnetic shielding, and low magnetic flux leakage. This series is ideal for suppressing EMI common-mode noise in applications such as LED lighting, TV games, and monitors.
Product Attributes
- Brand: YJYCOIN ()
- Origin: Shenzhen, China
- Website: http://www.yjycoin.com
Technical Specifications
| Type | Inductance L1=L2 (uH) @100KHz/0.1V | DC Resistance (m) Max. | Rated Current (A) Max. | Hi-Pot (Vac) 3mA/1S | Impedance () Min. | Freq. Range (MHz) |
|---|---|---|---|---|---|---|
| YLCM1006C-100T | 1040% | 30 | 4.00 | 600 | 100 | 10~300 |
| YLCM1006C-220T | 2240% | 35 | 3.80 | 600 | 300 | 10~200 |
| YLCM1006C-470T | 4740% | 40 | 3.20 | 600 | 800 | 10~100 |
| YLCM1006C-101T | 10040% | 25 | 3.00 | 1000 | 100 | 10~300 |
| YLCM1006C-121T | 12040% | 25 | 2.50 | 1000 | 200 | 10~200 |
| YLCM1006C-201T | 20040% | 15 | 3.00 | 1000 | 300 | 7~150 |
| YLCM1006C-221T | 22040% | 32 | 2.20 | 1000 | 350 | 7~150 |
| YLCM1006C-251T | 25040% | 35 | 2.00 | 1000 | 400 | 5~100 |
| YLCM1006C-471T | 47040% | 65 | 1.60 | 1000 | 900 | 2~40 |
| YLCM1006C-501T | 50040% | 70 | 1.50 | 1000 | 800 | 2~5 |
| YLCM1006C-102T | 100040% | 180 | 0.95 | 1000 | 1400 | 1~40 |
| YLCM1006C-202T | 200040% | 270 | 0.80 | 300 | 2000 | 0.5~15 |
| YLCM1006C-222T | 220040% | 300 | 0.75 | 300 | 3400 | 1~11 |
| YLCM1006C-302T | 300040% | 330 | 0.70 | 300 | 3000 | 0.5~10 |
| YLCM1006C-332T | 330040% | 360 | 0.65 | 300 | 4400 | 0.9~7 |
| YLCM1006C-392T | 390040% | 540 | 0.52 | 300 | 5000 | 0.7~6 |
| YLCM1006C-402T | 400040% | 600 | 0.45 | 300 | 4000 | 0.5~5 |
| YLCM1006C-472T | 470040% | 720 | 0.35 | 300 | 6200 | 0.6~3 |
| YLCM1006C-502T | 500040% | 780 | 0.30 | 300 | 5000 | 0.5~3 |
General Specifications
| Parameter | Value |
|---|---|
| Rated Current (Temp. rise 40 Typ) | See table above |
| Operating Temperature | -20 to +125 |
| Storage Temperature | -20 up to +40, 75% RH max. |
| Material List - CORE | FERRITE |
| Material List - CASE | DAP-WH9100 |
| Material List - WIRE | P180 Grd1 |
| Material List - SOLDER | Sn99.3:Cu0.7 |
| Material List - ADHESIVE | XNR-3614 |
| Material List - INK | WHITE |
Reliability Testing
| Test | Condition/Result |
|---|---|
| Operating Temperature | -20 to +125 (Contain Heating coil) |
| Appearance Inspection | No external defects by visual inspection |
| Terminal Strength | After soldering, between copper plate and terminals of coils, push in two directions of X, Y with standing 10N(1.02kg) for 10+/-2 sec. Terminals should not peel off. |
| Heat endurance of reflow soldering | Refer to figure |
| Insulating resistance | Over 100 M at 100V D.C. between wire and core. |
| Dielectric Strength | Apply at 0.5KV 3mA for 1 minute between wire and core. |
| Temperature characteristics | Inductance coefficient (0~2,000) 10 / ( -20 ~ +125 ) |
| Humidity characteristics | Inductance deviation within 10%, after 96 hours in 90~95% relative humidity at 40 2 and 1 hours drying under normal condition. A test is made under the above mentioned condition, and it is kept for 2 hours in the normal temperature and humidity. After that, no mechanical and electrical defect should be found. |
Taping Dimensions
| TYPE | W (mm) | A (mm) | B (mm) | D (mm) | P (mm) | K (mm) | T (mm) | MPQ |
|---|---|---|---|---|---|---|---|---|
| YLCM1006C | 24.00.3 | 10.60.3 | 11.50.1 | 11.50.1 | 160.1 | 5.00.1 | 0.400.05 | 800 |
Reel Dimensions
| TYPE | W (mm) | W1 (mm) | A (mm) | B (mm) | C (mm) | D (mm) |
|---|---|---|---|---|---|---|
| YLCM1006C | 3302.0 | 24.41.5 | 30.4MAX | 23.9 Min | 13.00.50 | 21.00.80 |
Cover Tape Peel Off Condition
Cover tape peel force shall be 0.1N to 1.3N. Reference peel speed 30010mm/min.
2409271302_YJYCOIN-YLCM1006C-102T_C5200254.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
