<
>
Specifications
Impedance @ Frequency:
65Ω@10MHz;1kΩ@100MHz
Insulation Resistance(IR):
10MΩ
Voltage Rating - DC:
60V
Current Rating:
40mA
Operating Temperature:
-40℃~+125℃
Voltage Withstand:
150V
Mfr. Part #:
YLM4015A-102T
Package:
SMD-4P,4x4mm
Key Attributes
Model Number:
YLM4015A-102T
Product Description
Product Overview
The YLM4015 Series Wire Wound Common Mode Choke is a compact and highly effective filter designed for noise suppression. It features high common mode impedance at noise frequencies and low differential mode impedance at signal frequencies, ensuring minimal distortion for high-speed video signal transmission. This choke is suitable for DC power line noise suppression, Switch Mode Power Supplies, Variable Frequency Drives, and AC/DC power rectifiers, operating within a temperature range of -40 to +125.
Product Attributes
- Brand: YJYCOIN
- Origin: Shenzhen, China
Technical Specifications
| Part Number | Impedance () at 10MHz (40%) | Impedance () at 100MHz (Typ.) | Common Mode DCR () Max. | DC Current (A) Typ. | Rated Voltage (Vdc) Typ. | Insulation Resistance (M) Min. | Withstand Voltage (Vdc) Typ. |
| YLM4015A-101T | 10 | 100 | 0.016 | 3.1 | 60 | 10 | 150 |
| YLM4015A-251T | 25 | 250 | 0.024 | 2.6 | 60 | 10 | 150 |
| YLM4015A-401T | 38 | 400 | 0.030 | 2.1 | 60 | 10 | 150 |
| YLM4015A-501T | 50 | 500 | 0.030 | 2.1 | 60 | 10 | 150 |
| YLM4015A-601T | 53 | 600 | 0.030 | 2.0 | 60 | 10 | 150 |
| YLM4015A-851T | 65 | 850 | 0.040 | 1.9 | 60 | 10 | 150 |
| YLM4015A-102T | 65 | 1000 | 0.040 | 2.0 | 60 | 10 | 150 |
| YLM4015A-172T | 100 | 1700 | 0.060 | 1.5 | 60 | 10 | 150 |
| YLM4015A-242T | 120 | 2400 | 0.075 | 1.4 | 60 | 10 | 150 |
| YLM4015A-302T | 180 | 2200 | 0.120 | 1.1 | 60 | 10 | 150 |
| Item | Specifications | Test Method |
| Appearance and Dimensions | Style and Dimensions | Visual Inspection and Measured with Slide Calipers. |
| Bonding Strength and Core Strength | No Evidence of Chipping, Breakage. No Evidence of Coming off Glass-Epoxy Substrate. Applying Force (F): 10N Applying Time: 51s | |
| Body Strength | No Evidence of Chipping, Breakage. Applying Force (F): 10N Applying Time: 51s | |
| Vibration | Products Shall be Soldered on the Substrate. Oscillation Frequency: 10 to 55 to 10Hz for 1 Min. Total Amplitude: 1.5mm Testing Time: A Period of 2 Hours in Each of 3 Mutually Perpendicular Directions (Total 6 Hours). | |
| Drop | Products Shall be Dropped Concrete or Steel Board. Method: Free Fall Height: 1m The Number of Times: 10 Times | |
| Solderability | The electrodes Shall be at Least 90% Covered with New Solder coating. Flux: Ethanol Solution of Rosin, 25 (wt)% Pre-Heating: 15010, 1 Minute. Solder: (1) Sn/Pb=60/40, (2) Sn-3.0Ag-0.5Cu Solder Temperature: (1) 2305, (2) 2305 Immersion Time: 41s Immersion and Immersion Rates: 25mm/s | |
| Resistance to Soldering Heat | Meet Table 1. Flux: Ethanol Solution of Rosin, 25 (wt)% Pre-Heating: 15010, 1 Minute. Solder: (1) Sn/Pb=60/40, (2) Sn-3.0Ag-0.5Cu Solder Temperature: 2705 Immersion Time: 51s Immersion and Immersion Rates: 25mm/s Then Measured After Exposure in the Room Condition for 4 to 48 Hours. | |
| Temperature Cycle | Meet Table 1. 1 Cycle 1 step: -40 (+0, -3) / 30min (+3, -0) min 2 step: Ordinary Temp. / 3 min max. 3 step: +125 (+3, -0) / 30min (+3, -0) min 4 step: Ordinary Temp. / 3 min max. Total of 10 Cycles Then Measured After Exposure in the Room Condition for 4 to 48 Hours. | |
| Humidity | Temperature: 402 Humidity: 90 to 95% (RH) Time: 1000h (+48 h, -0 h) Then Measured After Exposure in the Room Condition for 4 to 48 Hours. | |
| Humidity Load | Temperature: 402 Humidity: 90 to 95% (RH) Test Voltage: Rated Voltage Time: 1000h (+48 h, -0 h) Then Measured After Exposure in the Room Condition for 4 to 48 Hours. (Ref. Item) | |
| Heat Life | Temperature: 852 Humidity: 90 to 95% (RH) Test Voltage: Rated Voltage Time: 1000h (+48 h, -0 h) Then Measured After Exposure in the Room Condition for 4 to 48 Hours. (Ref. Item) | |
| Cold Resistance | Temperature: -402 Time: 1000h (+48 h, -0 h) Then Measured After Exposure in the Room Condition for 4 to 48 Hours. (Ref. Item) |
| TYPE | A (mm) | B (mm) | C (mm) | Max. D (mm) | Typ. E (mm) |
| YLM4015 | 4.000.2 | 4.000.2 | 1.60 | 1.55 | 1.40 |
2507081835_YJYCOIN-YLM4015A-102T_C49308031.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
