<
>
Specifications
Current Rating:
7A
Inductance:
10uH
Tolerance:
±20%
DC Resistance(DCR):
29.82mΩ
Current - Saturation(Isat):
7.64A
Mfr. Part #:
XRFWHP0660A-100M
Package:
SMD,6.6x6.4mm
Key Attributes
Model Number:
XRFWHP0660A-100M
Product Description
Product Overview
The XRFWHP0660A-100M is a Molding Power Inductor from Dongguan xiangru electronics co., ltd. It is designed for power applications, offering a reliable inductance of 10uH with a 20% tolerance and a rated current of 7.6A. This inductor is suitable for various electronic circuits requiring efficient power management.
Product Attributes
- Brand: Dongguan xiangru electronics co., ltd
- Origin: China
- Part Name: Molding Power Inductors
- Our Part No: XRFWHP0660A-100M
- Customer P/N: XRFWHP0660A
- Description: XRFWHP0660A 10uH 20% 7.6A
Technical Specifications
| Item | Specification | Test Conditions |
| Inductance (L) | 10H 20% | 100KHz, 1.0V |
| DC Resistance (DCR) | 29.82 m Max. (25.5 Typ.) | @25 |
| Saturation Current (Isat) | 7.6A Typ. (Inductance drop approximately 30% @ IDC 7.6A) | 40% max drop |
| Rated Current (Irms) | 7.0A Typ. | (T) 40 |
| Use Frequency Range | 7.7 MHz (REF) | |
| Absolute Maximum Voltage | DC 60V Max | |
| Operating Temperature Range | -55 ~ +125 | |
| Dimensions (A) | 6.40.3 mm | |
| Dimensions (B) | 6.60.3 mm | |
| Dimensions (C) | 5.80.3 mm | |
| Dimensions (D) | 5.10.5 mm | |
| Dimensions (E) | 1.40.3 mm | |
| Dimensions (F) | 2.60.3 mm | |
| Core Material | Refer to Material List | |
| Coating Material | Refer to Material List | |
| Marking | Refer to Material List | |
| Solder Heat Resistance | Inductance within 10% | Preheat:150 100s Max. SOLDER TEMPERATURE: 2555 DIP TIME:10s Max. |
| Vibration Test | No damage | Amplitude: 1.5 mm, Frequency: 10-55-10Hz / 1 MIN, Direction: X, Y, Z, Duration: 2 HRS/X, Y, Z |
| Shock Test | No damage | Dropped 10 times from 1m onto 3cm wooden board. |
| Solderability Test | >90% of terminal electrode covered | Preheat:150 120s, SOLDER BATH AT 2555 DIP TIME:10s Max. |
| Component Adhesion (Push/Pull Test) | 1.5Kg Min | Reflow soldered (2555 for 10 seconds) to copper substrate. |
| Flexure Strength | No damage to dielectric | Solder to substrate, bend by 2mm and return. |
| Resistance to Solvent Test | No case deformation, change in appearance or alteration of marking | Withstand 6 minutes of alcohol. |
| Temperature Characteristic | Inductance within 10% of initial value | -55 ~ +125 |
| Humidity Test | No damage | 602 / 962 HOURS R.H:90-95%RH |
| Low Temperature Storage | No damage | -552, 962 HOURS |
| Thermal Shock Test | No damage | -555 for 30 mins, +1255 for 30 mins. Total: 10 Cycles |
| High Temperature Storage | No damage | 1202, with max rated current applied. |
| High Temperature Load Life Test | No evidence of short or open circuit | 1252, 50012 HOURS, Allowed DC Current. |
| Humidity Load Life Test | No damage | 602, R.H.: 90-95, 50012 HOURS, Allowed DC Current. |
| Iron Soldering Profile | Max. 1 time for iron soldering | Power:Max.30W, Pre-heating:150/60sec, Soldering time:3sec.Max., Solder paste:Sn/3.0Ag/0.5Cu |
| Packaging (Reel) | 800 PCS per reel | Reel Dimensions: 330mm (A), 21mm (B0.8), 13mm (C0.5), 16.5mm (G), 100mm (N), 21mm (T) |
| Packaging (Tape) | Refer to IEC 60286 -3:2013 | Peel Force: 0.1N to 1.0N (8mm tape), 0.1N to 1.3N (12mm56mm tape) at 300mm/MIN10mm/MIN. |
| Packaging (Box/Carton) | Inner Box: 2 reels (1600 PCS) / Carton: 2 inner boxes (3200 PCS) | Inner Box: 34*34*6.5cm / Carton: 36.5*35.5*14.5cm |
| Storage Conditions | Less than 40 and 70% RH. Use within 6 months. Avoid chlorine or sulfur. | |
| Transportation | Handle with care. Use tweezers or vacuum pickup. Minimize abrasion and mechanical shock. |
2509161435_XR-XRFWHP0660A-100M_C51913009.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
