<
>
Specifications
Tolerance:
±10%
Voltage Rating:
100V
Capacitance:
560pF
Operating Temperature:
-55℃~+105℃
Dielectric Material:
Metallized Polyester
Mfr. Part #:
W222A561KD5L00A00A
Package:
Through Hole,P=5mm
Key Attributes
Model Number:
W222A561KD5L00A00A
Product Description
Product Specification Approval for Metallized Polyester Film Capacitors (Miniaturized)
This document outlines the specifications for the W22 series of miniaturized metallized polyester film capacitors, designed for various electronic applications. These capacitors offer reliable performance and a compact form factor.
Product Attributes
- Brand: WDI ()
- Product Type: Metallized Polyester Film Capacitors (Miniaturized)
- Material: Metallized Polyester Film
- Outer Encapsulation: Flame-retardant epoxy resin (UL94V-0)
- Certifications: Implied compliance with GB/T 2693, GB/T 7332, IEC 60384-1, IEC 60384-2 standards.
- Supplier: Shenzhen Weidy Industrial Development Co., Ltd.
Technical Specifications
| Part Number | Model | Capacitance (uF) | Rated Voltage (V) | Capacitance Tolerance | Pitch (mm) | Lead Diameter (mm) | Max Height (mm) | Max Width (mm) | Max Thickness (mm) | Lead Spacing (mm) |
| W222A561KD5L00A00A | WDQV-561K-P5 | 0.00056 | 100 | ±10% (K) | 5.0 | 0.5 | 7.5 | 7.5 | 4.5 | 5.0 ±0.5 |
General Technical Parameters
| Parameter | Specification |
| Product Name | Metallized Polyester Film Capacitor (Miniaturized) |
| Applicable Standards | GB/T 2693 (IEC 60384-1), GB/T 7332 (IEC 60384-2) |
| Product Structure | 1. Metallized Polyester Film, 2. Metal Spray Layer, 3. Leads, 4. Internal Epoxy Resin Encapsulation, 5. External Flame-retardant Epoxy Resin Encapsulation (UL94V-0) |
| Climatic Category | 55/105/21 |
| Rated Temperature | 85℃ |
| Operating Temperature Range | -55℃ to +105℃ |
| Rated Voltage | 63V, 100V, 250V, 400V |
| Capacitance Range | 0.0001μF to 1.0μF |
| Capacitance Tolerance | ±5% (J); ±10% (K) |
| Withstand Voltage | 1.4UR (5s) |
| Dissipation Factor (tan δ) | ≤1.0% (20℃, 1KHz) |
| Insulation Resistance | UR≤100V: ≥15000MΩ; CR≤0.33μF: ≥5000S; CR>0.33μF (20℃, 10V, 1min) UR>100V: ≥15000MΩ; CR≤0.33μF: ≥5000S; CR>0.33μF (20℃, 100V, 1min) |
| Lead Strength (Tensile) | 0.3<d≤0.5: 5N; 0.5<d≤0.8: 10N; 0.8<d≤1.25: 20N (duration: 10±1s) |
| Lead Strength (Bending) | 0.3<d≤0.5: 2.5N; 0.5<d≤0.8: 5N; 0.8<d≤1.25: 10N (two bends in each direction) |
| Solderability | 235℃±5℃, 2.0s±0.5s (good tinning on lead surface) |
| Resistance to Soldering Heat | 260℃±5℃, 10s±1s (Capacity change: ≤±2%; Dissipation factor change: ≤0.3% at 1 KHz) |
| Rapid Change of Temperature | -55℃ to +105℃, 5 cycles (Capacity change: ≤±5%; Dissipation factor change: ≤0.3% at 1 KHz; Insulation Resistance: ≥50% of initial) |
| Vibration | 10-500Hz, 0.75mm amplitude or 98m/s² acceleration (6 hours total) |
| Impact | 4000 cycles, 390m/s² acceleration, 6ms pulse duration |
| Damp Heat (Steady State) | 40℃±2℃, 93+2/-3% RH, 21 days (Capacity change: ≤±5%; Dissipation factor change: ≤0.5% at 1 KHz; Insulation Resistance: ≥50% of initial) |
| Dry Heat | +105℃, 16 hours (Capacity change: ≤±5%; Dissipation factor change: ≤0.3% at 1 KHz; Insulation Resistance: ≥50% of initial) |
| Cold | -55℃, 2 hours |
| Low Pressure | 15-35℃, 8.5KPa, 1 hour (Rated voltage applied during the last minute of the test cycle) |
| Cyclic Damp Heat | IEC 68-2-30, Test Db, severity b |
2405081155_WEIDY-W222A561KD5L00A00A_C22363857.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
