<
>
Specifications
Tolerance:
±5%
Voltage Rating:
100V
Capacitance:
68nF
Dielectric Material:
Metallized Polyester
Mfr. Part #:
W242A683JD2TAAA4JA
Package:
Through Hole,P=5mm
Key Attributes
Model Number:
W242A683JD2TAAA4JA
Product Description
Product Overview
The W242A683JD2TAAA4JA is a metallized polyester film capacitor (miniature box type) from the CL23B series, designed for various electronic applications. It offers reliable performance with a capacitance of 0.068F and a rated voltage of 100V.
Product Attributes
- Brand: WEIDY ()
- Product Code: W242A683JD2TAAA4JA
- Customer Part Number: CL23B-100V-683J
- Supplier:
- Material: Metallized Polyester Film
- Construction: Miniature Box Type
- Standards: GB/T 2693 (IEC 60384-1), GB/T 7332 (IEC 60384-2)
- Certifications: Not explicitly mentioned in the provided text.
- Origin: China (implied by supplier location)
Technical Specifications
| Parameter | Specification | Value |
| Model Series | CL23B | - |
| Product Code | W242A683JD2TAAA4JA | - |
| Rated Voltage (DC) | 100V | - |
| Capacitance | 0.068F | - |
| Capacitance Tolerance | 10% (K) | - |
| Climate Category | 55/105/21 | - |
| Rated Temperature | 85 | - |
| Operating Temperature Range | -55 to 105 | (Decreasing factor 1.25% per for VR(dc) from +85 to 105) |
| Dielectric Withstand Voltage | 1.4UR (5s) | - |
| Voltage Slew Rate | 100V/s | (Cut-off current: 5mA) |
| Dissipation Factor (tan ) | 1.0% | (at 20, 1KHz) |
| Insulation Resistance | 15000M (for CR0.33F, UR100V) | (at 20, 10V, 1min) |
| Insulation Resistance | 5000S (for CR>0.33F, UR100V) | (at 20, 10V, 1min) |
| Insulation Resistance | 15000M (for CR0.33F, UR>100V) | (at 20, 100V, 1min) |
| Insulation Resistance | 5000S (for CR>0.33F, UR>100V) | (at 20, 100V, 1min) |
| Lead Strength (Tensile) | 5N (for 0.3d0.5mm) | (Duration: 101 seconds) |
| Lead Strength (Tensile) | 10N (for 0.5d0.8mm) | (Duration: 101 seconds) |
| Lead Strength (Tensile) | 20N (for 0.8d1.25mm) | (Duration: 101 seconds) |
| Lead Strength (Bending) | 2.5N (for 0.3d0.5mm) | (Load applied twice in two directions) |
| Lead Strength (Bending) | 5N (for 0.5d0.8mm) | (Load applied twice in two directions) |
| Lead Strength (Bending) | 10N (for 0.8d1.25mm) | (Load applied twice in two directions) |
| Solderability | 2355, 2.0s0.5s | (Good tinning on lead surface) |
| Resistance to Soldering Heat | 2605, 10s1s | (Capacitance change: 2%, tan change: 0.3%) |
| Rapid Temperature Change | -55 to +105, 5 cycles | (Capacitance change: 5%, tan change: 0.3%, Insulation Resistance: 50% of initial) |
| Vibration | 10-500Hz, 0.75mm amplitude or 98m/s acceleration | (6 hours total duration) |
| Impact | 4000 cycles, 390m/s, 6ms pulse duration | - |
| Dry Heat | +105, 16 hours | (No permanent breakdown or arcing, Capacitance change: 5%, tan change: 0.3%, Insulation Resistance: 50% of initial) |
| Cold | -55, 2 hours | - |
| Low Pressure | 8.5KPa, 1 hour | (Rated voltage applied during the last 1 minute) |
| Cyclic Damp Heat | IEC 68-2-30, Severity b | (Rated voltage applied for 1 minute after test) |
| Steady State Damp Heat | 402, 93+2/-3%, 21 days | (Capacitance change: 5%, tan change: 0.5%, Insulation Resistance: 50% of initial) |
| Dimensions (L x W x H) | 7.2 x 6.5 x 2.5 mm | (Body dimensions) |
| Pitch (P) | 5.0 mm | - |
| Lead Diameter (d) | 0.5 mm | - |
| Lead Length (L0) | 1 mm | - |
2312261452_WEIDY-W242A683JD2TAAA4JA_C7502427.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
