Product Specification Approval Sheet
Document Number: APS-1608-002
Version: A/1
Date of Issue: 2016-8-02
Page: 1 of 12
Product Description
Metallized Polyester Film Capacitor (Miniaturized) Specification Approval Sheet. This document outlines the specifications for the W22 series of metallized polyester film capacitors, designed for miniaturized applications.
Product Attributes
- Supplier: (Shenzhen Weidy Industrial Development Co., Ltd.)
- Supplier Address: Room 506-509, 5th Floor, New Asia Electronics Mall, Zhenzhong Road, Futian District, Shenzhen, Guangdong, China
- Supplier Contact: TEL: 0755-82811688, FAX: 0755-82812688
- Supplier Website: http://www.weidy.net
- Product Type: Metallized Polyester Film Capacitor (Miniaturized)
- Standard Compliance: GB/T 2693 (IEC 60384-1), GB/T 7332 (IEC 60384-2)
- Flame Retardant: Outer encapsulation epoxy resin (UL94V-0)
Technical Specifications
| Product Part Number | Model | Capacitance (uF) | Rated Voltage (V) | Pitch (mm) | Max. Height (mm) | Max. Width (mm) | Max. Thickness (mm) |
|---|---|---|---|---|---|---|---|
| W222A563JD5L00A00A | WDQV-563J-P5 | 0.056 | 100 | 5.0 0.5 | 7.0 | 7.5 | 4.0 |
| Parameter | Specification |
|---|---|
| Climate Category | 55/105/21 |
| Rated Temperature | 85 |
| Operating Temperature Range | -55105 |
| Rated Voltage | 63V, 100V, 250V, 400V |
| Capacitance Range | 0.0001F~1.0F |
| Capacitance Tolerance | 5% (J); 10% (K) |
| Withstand Voltage | 1.4UR (5s) |
| Dissipation Factor (tan ) | 1.0% (20, 1KHz) |
| Insulation Resistance | UR100V: CR0.33F 5000S; CR0.33F (20, 10V,1min) UR100V: CR0.33F 5000S; CR0.33F (20, 100V,1min) 15000M for CR0.33F |
| Lead Strength (Tensile) | 0.3d0.5: 5N; 0.5d0.8: 10N; 0.8d1.25: 20N |
| Lead Strength (Bending) | 0.3d0.5: 2.5N; 0.5d0.8: 5N; 0.8d1.25: 10N |
| Solderability | 2355, 2.0s0.5s |
| Resistance to Soldering Heat | 2605, 10s1s |
| Rapid Temperature Change | C/C : 5%; tan : 0.3% at 1 KHZ |
| Vibration | 10500Hz, 0.75mm or 98m/s |
| Shock | 4000 cycles, 390m/s, 6ms |
| Damp Heat (Steady State) | 402, 93+2/-3 %, 21 days |
| Dry Heat | +105, 16 hours |
| Cold | -55, 2 hours |
| Low Pressure | 8.5KPa, 1 hour (rated voltage applied in the last minute) |
| Cyclic Damp Heat | Test Db, Severity b |
Product Coding Rules
1. Capacitor Model Code (1st-3rd digit):
- W10: CH11
- W11: CL11
- W12: CBB11
- W13: CBB13
- W14: CBB81
- W15: CBB81B
- W16: WDQB
- W17: WDQC
- W18: PSR
- W20: CL20T
- W21: CL21
- W22: CL21X
- W23: CL21B
- W24: CL23B
- W25: CL25
- W26: CL20A
- W30: CBB20T
- W31: CBB21
- W32: CBB21B
- W33: CBB20A
- W38: MKP25
- W36: CBB22
- W40: MKPR
- W41: S
- W42: MKP (X2)
- W43: MKP63 (Y2)
- W44: MKP64 (X1)
- W45: MKP65 (X1/440 V)
- W46: MKP66 (X1/760V )
- W47: CL21B (E)
- W48: CBB21B(E )
- W49: CBB21(E)
- W51: CLN51
- W52: CBS52
- W60: CBB60
- W61: CBB61
- W65: CBB65
- W71: CBB71
- W72: CBB72
- W82: MMKP8 2
- W84: MMKP84
- W91: CLN21
- W92: C92
- W19: CBB13B
- W62: CBB62
- W39: RCP
- W28: CBB28
- W50: CL21( E)
- W53: CBB22( E)
- W54: X1Y2
- W27: CL21 S
- W37: CBB21 S
- W29: MKP23
- W63: MKPR
2. Rated Voltage (4th-5th digit): (Note: Digit+Letter for DC, Letter+Digit for AC)
- DC Voltages: 16V(1), 20V(2), 25V(3), 50V(4), 63V(5), 80V(6), 100V(A), 125V(B), 160V(C), 200V(D), 250V(E), 400V(F), 500V(G), 630V(H), 800V(J), 1000V(K), 1250V(L), 1600V(M), 2000V(N), 2500V(P), 3000V(Q), 4000V(R), 850V(S), 1200V(T), 1500V(U)
- AC Voltages: 120V(A1), 150V(B1), 230V(C1), 240V(P1), 275V(P2), 280V(P3), 300V(Q1), 305V(Q2), 310V(Q3), 330V(R1), 350V(R2), 440V(S1), 450V(S2), 480V(S3), 540V(T1), 550V(T2), 600V(U1), 690V(U2), 700V(V1), 760V(V2), 1100V(W1), 1300V(W2)
3. Nominal Capacitance (6th-8th digit): (According to JIS standard)
- 101 = 10x10 pF = 0.1nF
- 102 = 10x10 pF = 1.0nF = 0.001uF
- 103 = 10x10 pF = 10nF = 0.01uF
- 104 = 10x10 pF = 100nF = 0.1uF
- 105 = 10x10 pF = 1000nF = 1uF
- 106 = 10x10 pF = 10000nF = 10uF
- 107 = 100uF
- 108 = 1000uF
- 109 = 10000uF
4. Capacitance Tolerance (9th digit):
- 1% (F), 2% (G), 3% (H), 5% (J), 10% (K), 15% (L), 20% (M), 0~+10% (T), 0~-10% (P)
5. Lead Pitch / Axial Product Length (10th digit):
- Lead Pitch: 3.5(A), 4.0(B), 4.5(C), 5.0(D), 5.5(E), 6.0(F), 6.5(G), 7.0(H), 7.5(J), 10.0(K), 12.5(L), 15.0(M), 20.0(N), 22.0(P), 22.5(Q), 25.0(R), 27.0(S), 27.5(T), 30.0(U), 31.0(V), 32(W), 37(X), 26(Y), 8(1)
- Axial Length: 15(1), 19(2), 21(3), 27(4), 32(5), 37(6), 42(7), 46(8), 24(9), 50(A), 56(B)
- (*If the product is axial, this position represents the product length)
6. Product Leads (11th digit):
- CP 0.5(5), CP 0.6(6), CP 0.7(7), CP 0.8(8), CU 1.0(1), CU 0.8(9), CU 0.7(4), CU 1.2(A), CP 1.0(C)
7. Packaging Method and Lead Forming Code/Terminal Code (12th digit):
- S: Straight leads, cut (L8MM)
- M: Straight leads, cut (20MM L8MM)
- L: Straight leads, cut (L20MM)
- W: Bent leads 90
- K: Lead forming (lead length tolerance 0.5mm)
- Y: Lead forming (lead length tolerance 0.3mm)
- T: Tape and Reel packaging
8. Internal Feature Code (13th-18th digit):
- (Details not provided in the excerpt)
Packaging Dimensions
Bulk Inner Box Dimensions: L: 280mm, W: 225mm, H: 120mm
Bulk Outer Box Dimensions: L: 480mm, W: 320mm, H: 280mm
Taped Outer Box Dimensions: L: 640mm, W: 360mm, H: 290mm
Taped Inner Box Dimensions: A: 50mm, B: 320mm, C: 330mm
2312261452_WEIDY-W222A563JD5L00A00A_C7502404.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
