<
>
Specifications
Tolerance:
±5%
Voltage Rating:
100V
Capacitance:
47nF
Dielectric Material:
Metallized Polyester
Mfr. Part #:
W242A473JD2TAAA4JA
Package:
Through Hole,P=5mm
Key Attributes
Model Number:
W242A473JD2TAAA4JA
Product Description
Product Specification Approval - Metallized Polyester Film Capacitor (Small Box Type)
This document outlines the specifications for the Metallized Polyester Film Capacitor (Small Box Type), product part number W242A473JD2TAAA4JA, model CL23B-100V-473J-P5.
Product Attributes
- Brand: Weidy ()
- Material: Metallized Polyester Film
- Certifications: GB/T 2693 (IEC 60384-1), GB/T 7332 (IEC 60384-2)
- Supplier: Shenzhen Weidy Industrial Development Co., Ltd.
- Supplier Website: http://www.weidy.net
Technical Specifications
| Product Part Number | Model | Capacitance (uF) | Rated Voltage (V) | Pitch/Axial Length (mm) | Lead Diameter (mm) | Tolerance | Case Dimensions (mm) (W x H x T) |
|---|---|---|---|---|---|---|---|
| W242A473JD2TAAA4JA | CL23B-100V-473J-P5 | 0.047 | 100 | 5.0 | 0.5 | J (5%) | 7.2 x 6.5 x 2.5 |
| Climate Category | Rated Temperature (C) | Operating Temperature Range (C) | Capacitance Range (F) | Capacitance Tolerance | Withstand Voltage (UR) | Dissipation Factor (tan ) | Insulation Resistance (M or S) |
|---|---|---|---|---|---|---|---|
| 55/105/21 | 85 | -55 to 105 | 0.001 to 1.0 | 5% (J), 10% (K) | 1.4UR (5s) | 1.0% (20C, 1KHz) | 15000 (CR0.33F) or 5000 (CR>0.33F) |
| Test Item | Condition | Parameter Change Limits |
|---|---|---|
| Lead Strength (Tensile) | 0.3d0.5: 5N; 0.5d0.8: 10N; 0.8d1.25: 20N (101s) | No visible damage |
| Lead Strength (Bending) | 0.3d0.5: 2.5N; 0.5d0.8: 5N; 0.8d1.25: 10N | No visible damage |
| Solderability | 2355, 2.0s0.5s | Good tinning on lead surface |
| Resistance to Soldering Heat | 2605, 10s1s | C/C: 2%; tan : 0.3% (1KHz) |
| Rapid Change of Temperature | -55 to +105, 30min each, 5 cycles | C/C: 5%; tan : 0.3% (1KHz); Insulation Resistance: 50% of initial |
| Vibration | 10-500Hz, 0.75mm or 98m/s, 6 hours total | No visible damage or loosening |
| Shock | 4000 cycles, 390m/s, 6ms | No visible damage or loosening |
| Dry Heat | +105, 16 hours | No permanent breakdown/arcing; C/C: 5%; tan : 0.3% (1KHz); Insulation Resistance: 50% of initial |
| Cold | -55, 2 hours | N/A |
| Low Pressure | 15-35, 8.5KPa, 1 hour (rated voltage applied during last minute) | N/A |
| Cyclic Damp Heat | IEC 68-2-30, severity b, after other cycles (rated voltage applied for 1 min) | N/A |
| Steady State Damp Heat | 402, 93%2%, 21 days | No visible damage; C/C: 5%; tan : 0.5% (1KHz); Insulation Resistance: 50% of initial |
Marking Description: 473J100 (Nominal Capacitance, Tolerance, Rated Voltage)
Packaging Dimensions:
- Bulk Inner Box: 280mm (L) x 225mm (W) x 120mm (H)
- Bulk Outer Box: 480mm (L) x 320mm (W) x 280mm (H)
- Taped Inner Box: 48mm (A) x 260mm (B) x 330mm (C)
- Taped Outer Box: 540mm (L) x 360mm (W) x 290mm (H)
2312261452_WEIDY-W242A473JD2TAAA4JA_C7502425.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
