<
>
Specifications
Power(Watts):
330mW
Resistance:
1mΩ
Voltage Rating:
-
Type:
Current Sense Resistor
Tolerance:
±1%
Mfr. Part #:
HFCL0603MW33R001F
Package:
0603
Key Attributes
Model Number:
HFCL0603MW33R001F
Product Description
HFCL0603/1206-series Current Sensing Resistor
This specification covers HFCL0603/1206-series Metal Foil Current Sensing Resistors. These components are designed for current sensing applications.
Product Attributes
- Brand: HFCL
- Material: MnCu alloy (Manganese Copper Alloy)
- Protective Coating: Flame-retardant epoxy, meets UL-94-V0 requirements (Green, White, Black markings)
- Origin: Not specified
Technical Specifications
| Part Number Series | Size | Resistance Value Range | Power Rating | Resistance Tolerance | TCR (ppm) | Dimensions (mm) |
|---|---|---|---|---|---|---|
| HFCL0603MW33-series | 0603 | R001~R025 (1m~25m) | 0.33W | 1%(F) (1~4m) 50 (5~25m) | 100 (1~4m) 50 (5~25m) | W: 1.600.20 L: 0.800.15 A: 0.180.10 B: 0.230.10 C: 0.400.10 D: 0.930.20 T: 0.550.10 |
| HFCL1206M1W0-series | 1206 | 0M50~R025 (0.5m~25m) | 1.0W | 150 (0.5~0.75m) 100 (1~4m) 50 (5~25m) | 0.5%(D) / 1%(F) (5~25m) | W: 3.200.20 L: 1.550.20 A: 0.410.20 B: 0.460.20 C: 0.500.20 D: 2.160.20 T: 0.500.20 |
Electrical Characteristics
| Part Number Series | Resistance Value (m) | Power Rating (Watt) | Resistance Tolerance (%) | TCR (ppm) |
|---|---|---|---|---|
| HFCL0603MW33-series | R001~R025 | 0.33 | 1%(F) (1~4m) 50 (5~25m) | 100 (1~4m) 50 (5~25m) |
| HFCL1206M1W0-series | 0M50~R025 | 1.0 | 150 (0.5~0.75m) 100 (1~4m) 0.5%(D) / 1%(F) (5~25m) | 150 (0.5~0.75m) 100 (1~4m) 50 (5~25m) |
Product Characteristics and Reliability Test Standard
| Parameter | Conditions | Acceptance Criteria | Test Method |
|---|---|---|---|
| Short Time Over Load | P= 2.5Pr ; T=252C , t = 5sec. | 1.0% | IEC60115-1 4.13 |
| High Temp. Exposure | T = +1702C ; t = 1000h | 1.0% | IEC60115-1 4.25 |
| Low Temp. Storage | T = -552C ; t = 1000h | 1.0% | IEC60115-1 4.25 |
| Moisture Load Life (60, 95%RH) | Vtest = Vmax ; T=602C ; RH=95% ; t= 90min ON , 30min OFF , 1000h | 2.0% | IEC60115-1 4.25 |
| Thermal Shock | -553C to 1253C with 30 minute dwell at each temperature and 1 min maximum transition time. 1000 cycles. | 1.0% | JESD22-A-104 |
| Load Life at 70C | Vtest = Vmax ; T=702C ;t= 90min ON , 30min OFF,1000h | 1.0% | IEC60115-1 4.25 |
| Solderability | Dip into solder at T = 2455C , t = 30.5sec. | The covered area >95% | IEC60115-1 4.17 |
| Resistance to Solder Heat | One reflow cycle according to JEDEC J-STD-020 followed by dip with T= 260C , t =10 sec. Part must meet initial specifications following test. | Part must meet initial specifications following test | JEDEC J-STD-020 |
| Mechanical Shock | a =100G , t =11ms, 5 times shock | 1.0% | IEC60115-1 4.21 |
| Substrate Bending | Span between fulcrums: 90mm; Bend Width: 2mm; Test board: Glass-Epoxy Board; Thickness: 1.6mm | 1.0% | IEC60115-1 4.33 |
Environmental Characteristics
- Operating Temperature Range: -55155
- Storage Conditions: 2 years under airtight conditions at +1040, 75% RH. Max. 30 days without dew at +1060, 95% RH.
Solder Pad Size and Welding Conditions
Recommended Solder Pad Dimensions
| Part Number Series | P (mm) | W (mm) | D (mm) | V (mm) | E (mm) | Rated Power (W) |
|---|---|---|---|---|---|---|
| HFCL0603MW33-series | 0.35 | 1.30 | 0.40 | 0.40 | 0.20 | 0.33W |
| HFCL1206M1W0-series | 0.762 | 2.29 | 1.014 | 0.762 | 0.381 | 1.00W |
Recommended Customer Soldering Parameters
- Wave Solder Temperature Profile: Preheating: 100~130, max. 100 sec. Soldering: 250~265 max. 10 sec. Maximum temperature: 2605, max. 10sec.
- Solder Reflow Temperature Profile: Preheating: 145 15, max. 120 sec. Soldering: min. 220, max. 60 sec. Maximum temperature: 2605, max. 10sec.
- Rework Temperature (hot air equipment): 350, 3~5 seconds
- Recommended Reflow Methods: IR, vapor phase oven, hot air oven. Exceeding recommended reflow temperatures may affect performance.
Lot Acceptance Test Requirements
- Visual Inspection: No outstanding stains, dirt, printing errors, or damage.
- Dimensions: All dimensions within specified limits.
- Resistance (Ro): Resistance value within specified limits at 25 (4-wire measurement).
- TCR: Within specified TCR range (measured at 25 and 125).
- Insulation Resistance (Ri): 100M between protective layer and resistive body (measured by high ohm meter).
Packaging Information
- Reel & Tape Specifications: Available for HFCL0603MW33-series and HFCL1206M1W0-series.
- Quantity & Weight: HFCL0603MW33-series: 5,000 pcs, 13040g. HFCL1206M1W0-series: 5,000 pcs, 16040g.
- Reel Dimensions: HFCL0603MW33-series: A=178mm, N=60mm, W1=9.0mm. HFCL1206M1W0-series: A=178mm, N=60mm, W1=9.0mm.
- Peeling Strength of Seal Tape: 0.1 1.0N (10 - 100gf).
Others
- Any deviations from this specification require mutual agreement.
- Modifications to this specification require mutual agreement and will be made by the company.
2411221127_Walter-Elec-HFCL0603MW33R001F_C970963.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
