<
>
Specifications
Number of Resistors:
4
Number of Pins:
8
Tolerance:
±5%
Resistance:
220kΩ
Power(Watts):
62.5mW
Temperature Coefficient:
±200ppm/℃
Mfr. Part #:
WA04X224JTL
Package:
0402x4
Key Attributes
Model Number:
WA04X224JTL
Product Description
Product Overview
The ASC WA04/06 series offers general-purpose chip resistor arrays designed for reduced final equipment size, lower assembly costs, and higher component reliability. These RoHS compliant and lead-free products are constructed with a high-grade ceramic body and feature internal metal electrodes connected by a resistive paste, precisely trimmed by laser. They are suitable for a wide range of consumer electronics, EDP, computer applications, and telecommunications.
Product Attributes
- Brand: ASC
- Certifications: RoHS compliant, Lead-free
- Material: High grade ceramic body (aluminum oxide)
- Construction: Convex Type & Concave Type
Technical Specifications
| Series No. | Size | Resistance Tolerance | Resistance Range | TCR (ppm/C) | Max. dissipation at Tamb=70C | Max. Operation Voltage (DC or RMS) | Max. overload voltage | Climatic category |
| WA04Y (Convex) | 0402x2 (1005x2) | 5% | 3 ~ 1M, Jumper | 10 R 1M: 300; R<10, R>1M: 400 | 1/16 W | 25V | 50V | 55/155/56 |
| WA04X (Convex) | 0402x4 (1005x4) | 1% | 10 ~ 1M | 10 R 1M: 200; R<10, R>1M: - | 1/16 W | 50V | 100V | 55/155/56 |
| WA06X (Convex) | 0603x4 (1608x4) | 5% | 3 ~ 1M | 10 R 1M: 200; R<10, R>1M: - | 1/10 W | 50V | 100V | 55/155/56 |
| WA06W (Convex) | 0602x8 (1605x8) | 1% | Jumper 10 ~ 100K | 100 | 1/16 W | 50V | 100V | 55/155/56 |
| WA06T (Concave) | 0603x4 (1608x4) | 5% | 1 ~ 10M | -300~+500 | 1/10 W | 50V | 100V | 55/155/56 |
| Item | Resistor Jumper | Temperature Coefficient of Resistance (T.C.R) | Short time overload (S.T.O.L) | Resistance to soldering heat(R.S.H) | Solderability | Temperature cycling | Load life (endurance) | Load life in Humidity | Adhesion | Insulation Resistance | Dielectric Withstand Voltage |
| Requirement | DC resistance values measured at the test voltages specified below : <10@0.1V,<100@0.3V,<1K@1.0V,<10K@3V, <100K@10V, <1M@25V, <10M@30V Within the specified tolerance < 50m | Natural resistance change per change in degree centigrade. (R2-R1)/R1 10^6 / (t2-t1) (ppm/C) t1 : 20C+5C-1C R1 : Resistance at reference temperature R2 : Resistance at test temperature Refer to QUICK REFERENCE DATA | Permanent resistance change after a 5second application of a voltage 2.5 times RCWV or the maximum overload voltage specified in the above list, whichever is less. R/R max. (2%+0.10) < 50m | Un-mounted chips completely immersed for 101second in a SAC solder bath at 2605C R/R max. (1%+0.05) no visible damage < 50m | Un-mounted chips completely immersed for 20.5 second in a SAC solder bath at 2355 good tinning (>95% covered) no visible damage | 30 minutes at -55C3C, 2~3 minutes at 20C+5C-1C, 30 minutes at +155C3C, 2~3 minutes at 20C+5C-1C, total 5 continuous cycles R/R max. (1%+0.05) no visible damage < 50m | 1000 +48/-0 hours, loaded with RCWV or Vmax in chamber controller 702C, 1.5 hours on and 0.5 hours off R/R max.(3%+0.10) For 10R<1M ; R/R max.(5%+0.10) For R<10, R1M < 50m | 1000 +48/-0 hours, loaded with RCWV or Vmax in humidity chamber controller at 40C2C and 90~95% relative humidity, 1.5hours on and 0.5 hours off R/R max.(3%+0.10) For 10R<1M ; R/R max.(5%+0.10) For R<10, R1M < 50m | Pressurizing force: 5N, Test time: 101sec. No remarkable damage or removal of the terminations. | Apply the maximum overload voltage (DC) for 1minute R10G | Apply the maximum overload voltage (AC) for 1 minute No breakdown or flashover |
2410121521_Walsin-WA04X224JTL_C396828.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
