Product Overview
The ASC WA04/06 series offers general-purpose chip resistor arrays designed for reduced equipment size and lower assembly costs. These resistors are constructed with a high-grade ceramic body and feature internal metal electrodes connected by a resistive paste, precisely trimmed by laser. They are RoHS compliant and lead-free, making them suitable for a wide range of consumer electronics, EDP, and telecom applications. The arrays are available in both convex and concave types, with various configurations and resistance values.
Product Attributes
- Brand: ASC
- Certifications: RoHS compliant
- Material: High grade ceramic body (aluminum oxide)
- Termination: Sn base (lead free)
Technical Specifications
| Series No. | Size | Resistance Tolerance | Resistance Range | Max. Dissipation (at 70C) | Max. Operation Voltage (DC or RMS) | Max. Overload Voltage | Climatic Category |
| WA04Y (Convex) | 0402x2 (1005x2) | 5%, 1% | 3 ~ 1M, Jumper 10 ~ 1M | 1/16 W | 25V | 50V | 55/155/56 |
| WA04X (Convex) | 0402x4 (1005x4) | 5%, 1% | 3 ~ 1M Jumper 10 ~ 1M | 1/16 W | 50V | 100V | 55/155/56 |
| WA06X (Convex) | 0603x4 (1608x4) | 5%, 1% | 1 ~ 10M Jumper, 10 ~ 100K | 1/10 W | 50V | 100V | 55/155/56 |
| WA06W (Convex) | 0602x8 (1605x8) | 5%, 1% | 10 ~ 1M, Jumper, 10 ~ 1M | 1/16 W | 50V | 100V | 55/155/56 |
| WA06T (Concave) | 0603x4 (1608x4) | 5%, 1% | 10 ~ 1M, Jumper | 1/10 W | 50V | 100V | 55/155/56 |
Dimensions (unit : mm)
| Series | L | W | T | P | A | Ta | Tb | B | C | D | G | H1 | H2 |
| WA04Y | 1.00 0.10 | 1.00 0.10 | 0.35 0.10 | 0.65 0.10 | 0.34 0.10 | 0.20 0.15 | 0.25 0.17 | - | - | - | - | - | - |
| WA04X | 2.00 0.10 | 1.00 0.10 | 0.45 0.10 | 0.50 0.05 | 0.40 0.10 | - | - | 0.20 0.10 | 0.30 0.05 | - | 0.25 0.10 | - | - |
| WA06X | 3.20 0.10 | 1.60 0.10 | 0.50 0.10 | 0.80 0.10 | 0.60 0.10 | - | - | 0.30 0.10 | 0.40 0.10 | - | 0.30 0.20 | - | - |
| WA06W | 4.00 0.20 | 1.60 0.15 | 0.45 0.10 | 0.50 0.20 | - | - | - | 0.30 0.20 | - | 0.20 0.10 | 0.30 0.20 | 0.40 0.20 | 0.30 0.10 |
| WA06T | 3.20+0.20/-0.10 | 1.60+0.20/-0.10 | 0.60 0.10 | 0.80 0.10 | 0.60 0.15 | - | - | 0.35 0.15 | 0.50 0.15 | - | 0.50 0.15 | - | - |
Marking
3-digits marking for E24 series 1% ,5% products. For values up to 9.1 the R is used as a decimal point. For values of 10.0 or greater the first 2 digits apply to the resistance value and the third indicates the number of zeros to follow. Example: 4.7 = 4R7, 10 = 100, 100 = 101, 6800 = 682, 47000 = 473. No marking for WA04Y chip resistors array and E96 series resistance.
Functional Description
Standard values of nominal resistance are taken from the E24 series for 5% tolerance and E24/E96 series for 1% tolerance, in accordance with IEC publication 60063. Power dissipation is dependent on operating temperature as shown in Fig. 3.
Mounting and Soldering
These Surface Mountable Resistors are suitable for automatic placement systems on ceramic substrates and printed-circuit boards (PCBs). They can withstand immersion in a solder bath of 260C for 10 seconds. Soldering tests are performed at 235C for 2 seconds, with no leaching at 260C for 30 seconds. Typical soldering profiles are shown in Fig. 4.
Test and Requirements
| Test Item | Test Procedure | Requirement |
| DC Resistance | Clause 4.5 | Within the specified tolerance |
| Temperature Coefficient of Resistance (T.C.R) | Clause 4.8 | Refer to QUICK REFERENCE DATA |
| Short Time Overload (S.T.O.L) | Clause 4.13 | R/R max. (2%+0.10) |
| Resistance to Soldering Heat (R.S.H) | Clause 4.18 | R/R max. (1%+0.05), no visible damage |
| Solderability | Clause 4.17 | Good tinning (>95% covered), no visible damage |
| Temperature Cycling | Clause 4.19 | R/R max. (1%+0.05), no visible damage |
| Load Life (Endurance) | Clause 4.25 | R/R max.(3%+0.10) for 10R<1M; R/R max.(5%+0.10) for R<10, R1M |
| Load Life in Humidity | Clause 4.24 | R/R max.(3%+0.10) for 10R<1M; R/R max.(5%+0.10) for R<10, R1M |
| Adhesion | Clause 4.32 | No remarkable damage or removal of the terminations. |
| Insulation Resistance | Clause 4.6 | R10G |
| Dielectric Withstand Voltage | Clause 4.7 | No breakdown or flashover |
Test Condition for Jumper (0 )
| Item | WA04Y | WA04X | WA06X | WA06W | WA06T |
| Power Rating At 70C | 1/16W | 1/16W | 1/10W | 1/16W | 1/10W |
| Resistance | MAX.50m | MAX.50m | MAX.50m | MAX.50m | MAX.50m |
| Rated Current | 1A | 1A | 1A | 2A | 1A |
| Peak Current | 1.5A | 1.5A | 3A | 3A | 3A |
| Operating Temperature | -55~155C | -55~155C | -55~155C | -55~155C | -55~155C |
Catalogue Numbers
Format: WA [Size Code] [Type Code] [Resistance Code] [Tolerance] [Packaging Code] [Termination Code]
Size Code: 06 (0603), 04 (0402)
Type Code: X (x4, Convex), Y (x2, Convex), W (x8, Convex), T (x4, Concave)
Resistance Code: 5% E24 (2 digits + blank), 1%, E24+E96 (3 digits + zero count). Jumper = 000_
Tolerance: F (1%), J (5%), P (Jumper)
Packaging Code: T (7 Reel), B (Bulk)
Termination Code: L (Sn base)
Packaging
WA06X, WA06T: 8mm width paper taping, 5000pcs/reel; Bulk: 5000pcs/polybag.
WA06W: 12mm width paper taping, 5000pcs/reel; Bulk: 5000pcs/polybag.
WA04X, WA04Y: 8mm width paper taping, 10,000pcs/reel.
2410121521_Walsin-WA04X49R9FTL_C880840.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
