<
>
Specifications
Mfr. Part #:
RFCPL0605030L9T
Package:
SMD
Key Attributes
Model Number:
RFCPL0605030L9T
Product Description
Product Overview
The RFCPL0605 Series is a RoHS and Halogen-Free compliant multilayer ceramic coupler designed for dual-band RF applications operating at 2.4 GHz and 5 GHz. It features a miniature footprint, low profile, and low insertion loss, making it suitable for compact RF designs. The coupler is ideal for 2.4GHz/5GHz band RF applications.
Product Attributes
- Brand: ASC
- Certifications: RoHS Compliance, Halogens Free
Technical Specifications
| Specification | 2400 ~ 2500 MHz | 4900 ~ 5850 MHz |
| Insertion Loss | 0.40 dB max. at +25C 0.45 dB max. at -40C ~ +85C | 0.40 dB max. at +25C 0.45 dB max. at -40C ~ +85C |
| Coupling Factor | 21.5 1.5 dB | 15.0 1.5 dB |
| Directivity | 15 dB min. | 15 dB min. |
| VSWR | 1.3 max. | 1.3 max. |
| Impedance | 50 | 50 |
| Moisture Sensitivity Levels | MSL is LEVEL 1 (Refer to : IPC/JEDEC J-STD-020) | |
| Operation Temperature Range | -40 ~ +85 | |
| Storage Temperature Range (Component) | -40 ~ +85 | |
| Storage Temperature Range (Before Soldering) | +5 ~ +40 | |
| Humidity (Before Soldering) | 30 to 70% relative humidity | |
| Test Item | Test Condition / Test Method | Specification |
| Solderability | JIS C 0050-4.6 / JESD22-B102D *Solder bath temperature235 5C *Immersion time2 0.5 sec SolderSn3Ag0.5Cu for lead-free | At least 95% of a surface of each terminal electrode must be covered by fresh solder. |
| Leaching | IEC 60068-2-58 *Solder bath temperature260 5C *Leaching immersion time30 0.5 sec Solder : SN63A | Loss of metallization on the edges of each electrode shall not exceed 25%. |
| Resistance to soldering heat | JIS C 0050-5.4 *Preheating temperature120~150C, 1 minute. *Solder temperature2705C *Immersion time101 sec SolderSn3Ag0.5Cu for lead-free | No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85C. |
| Drop Test | JIS C 0044 *Height75 cm *Test SurfaceRigid surface of concrete or steel. *Times6 surfaces for each units2 times for each side. | No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85C. |
| Vibration | JIS C 0040 *Frequency10Hz~55Hz~10Hz(1min) *Total amplitude1.5mm *Test times6hrs.(Two hrs each in three mutually perpendicular directions) | No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85C. |
| Adhesive Strength of Termination | JIS C 0051- 7.4.3 *Pressurizing force 2N(0603 ; 1.6 x 0.8 mm) 10N(>0603 ; 1.6 x 0.8 mm) *Test time51 sec | No remarkable damage or removal of the termination. |
| Bending test | JIS C 0051- 7.4.1 The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm/s per second until the deflection becomes 1mm/s and then pressure shall be maintained for 51 sec. | No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85C. |
| Temperature cycle | JIS C 0025 1. 303 minutes at -40C3C, 2. 10~15 minutes at room temperature, 3. 303 minutes at +85C3C, 4. 10~15 minutes at room temperature, Total 100 continuous cycles | No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85C. |
| High temperature | JIS C 0021 *Temperature85C2C *Test duration1000+24/-0 hours | No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85C. |
| Humidity (steady conditions) | JIS C 0022 *Humidity90% to 95% R.H. *Temperature402C *Time1000+24/-0 hrs. | No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85C. |
| Low temperature | JIS C 0020 *Temperature-40C2C *Test duration1000+24/-0 hours | No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85C. |
2410121912_Walsin-RFCPL0605030L9T_C2894178.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
