<
>
Specifications
Tolerance:
±5%
Voltage Rating:
630V
Capacitance:
2.2nF
Operating Temperature:
-40℃~+105℃
Dielectric Material:
Metallized Polyester
Mfr. Part #:
C212J22270P20001
Package:
Through Hole,P=5mm
Key Attributes
Model Number:
C212J22270P20001
Product Description
Product Overview
The C21 CL21/CL21X Series Capacitor is a metallized polyester film capacitor designed for DC and VHF signal applications, including blocking, by-pass, and coupling. It is widely used in filter and low pulse circuits. This capacitor features a non-inductive wound construction, a wide capacitance range, small size, light weight, and a long life due to its self-healing effect. The flame-retardant epoxy resin powder coating ensures safety and durability.
Product Attributes
- Brand: Wuxi Walson Electronics Co., Ltd.
- Origin: China
- Material: Metallized polyester film, Flame-retardant epoxy resin
- Certifications: UL94/V-0 (for epoxy coating)
Technical Specifications
| Reference Standard | Operating Temperature Range | Rated Temperature | Rated Voltage (VDC) | Capacitance Range (F) | Capacitance Tolerance | Dissipation Factor (max) CR1.0 F | Dissipation Factor (max) CR1.0 F | Insulation Resistance (min) CR0.33 F | Insulation Resistance (min) CR0.33 F |
| GB/T 7332-2011 (idt IEC 60384-2) | -40 +105 | 85 (+85 to +105 decreasing factor 1.25 % per for UR) | 100/160/250/400/450/630/1000/1250 | 0.001010.0 | 5 % (J)10 % (K) | 0.0090 | 0.0100 | 7500 M | 2500 s |
| Test Item | Test Method | Requirement |
| Outline check | Visual inspection and caliper measurement | The appearance is regular without visible damage; The mark is regular, clear and correct. |
| Terminal Strength (Pull) | Pull: 5 N, Direction: 180 , Time: 101 s | No visible damage |
| Terminal Strength (Bend) | Pull: 2.5 N, Direction: 90 , Times: 2 | No visible damage |
| Soldering Heat Resistance | Solder temperature: 260 C5 C, Immersion time: 10 s1 s | No visible damage |
| Solderability | Solder temperature: 235 C 5 C, Immersion time: 2.0 s0.5 s | The surface of the lead wire is well tinned, and the welding layer area reaches over 95 % |
| Rapid Change of Temperature | A=-40 C, B=+125 C, 5 cycles, Duration: t=30 min | No visible damage |
| Vibration | Frequency range: 10 Hz to 500 Hz, Amplitude: 0.75 mm, Test duration in each direction: 2 h | No visible damage |
| Bump | Times of collisions: 4000 times, Acceleration: 390 m/s, Pulse duration: 6 ms | No visible damage |
| Climate Sequence (Dry Heat, Damp Heat Cyclic, Cold) | Dry Heat +125 , 16 h; Damp Heat Cyclic Test Db, Severity: b, the first cycle; Cold -40 , 2 h; Damp Heat Cyclic Test Db, Severity b, the other cycles | Appearance no visible damage, marking clear. Capacitance change: C/C 5 %, Increase of Tan 0.008(1 kHz), I.R.50 % of the rated value |
| Damp Heat Steady State | Temperature: +402 , Humidity: 93 %2 %RH, Duration: 21 Days | No visible damage. Capacitance change C/C 5 %, Tan 0.0051 kHz, I.R.50 % of the rated value |
| Endurance | Temperature: +85 2 , Duration: 1000 (h), Test voltage: 1.25 UR | No visible damage, marking clear. Capacitance change: C/C 8 %, Tan 0.0051 kHz, I.R.50 % of the rated value |
| Temperature Characteristic | Static method, measurement at -40 , +20 , +105 | At -40 : -3.6 %C/C0; At +105 : 0C/C+6.3 % |
| Charging and Discharging | Times: 10000, Charging voltage: 1.0 UR, Charging time: 0.5 s, Discharging time: 0.5 s | Capacitance change: C/C 5 %, Tan 0.0051 kHz, I.R.50 % of the rated value |
2511101810_WALSON-C212J22270P20001_C52205130.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
