<
>
Specifications
Power(Watts):
1W
Resistance:
1.5Ω
Voltage Rating:
200V
Operating Temperature:
-55℃~+155℃
Type:
Thick Film Resistor
Temperature Coefficient:
±400ppm/℃
Tolerance:
±5%
Mfr. Part #:
SCR2512J1R5
Package:
2512
Key Attributes
Model Number:
SCR2512J1R5
Product Description
Thick Film Chip Resistors
Product Description: This document specifies the SCR series of lead-free and halogen-free thick film chip resistors. These are general-purpose resistors designed for a wide range of applications. The product is RoHS compliant, with lead in the electrode being lead-free and lead in the resistive layer glass material being exempt under RoHS.
Product Attributes:
- Brand: VICovo (implied by website www.vicovo.com)
- Origin: Anhui XiangSheng Technology Co., Ltd.
- Material: Thick Film
- Certifications: RoHS compliant (lead-free, halogen-free)
Technical Specifications
| Type | Rated Power | Max. Rated Voltage | Max. Overload Voltage | T.C.R. (ppm/) | Resistance Range () | Operating Temperature Range | JUMPER (0) Resistance | Tolerance (F/D) | Tolerance (J) |
|---|---|---|---|---|---|---|---|---|---|
| 0201 | 1/16 W | 25V | 50V | 400 | 1R9.1 | -55~ +125 | 50m MAX. | 1R9.1 | 1R9.1 |
| 0402 | 1/16 W | 50V | 100V | 400 | 1R9.1 | 10R10M | 10R10M | ||
| 0603 | 1/10 W | 75V | 150V | 400 | 1R9.1 | -55~ +155 | 50m MAX. | 1R9.1 | 10R10M |
| 0805 | 1/8 W | 150V | 300V | 400 | 1R9.1 | 10R10M | 10R10M | ||
| 1206 | 1/4 W | 200V | 400V | 400 | 1R9.1 | -55~ +155 | 50m MAX. | 1R9.1 | 10R10M |
| 1210 | 1/2 W | 200V | 400V | 400 | 1R9.1 | 10R10M | |||
| 2010 | 3/4 W | 200V | 400V | 400 | 1R9.1 | 10R10M | |||
| 2512 | 1 W | 200V | 400V | 400 | 1R9.1 | -55~ +155 | 50m MAX. | 1R9.1 | 10R10M |
| Type | L (mm) | W (mm) | H (mm) | L1 (mm) | L2 (mm) |
|---|---|---|---|---|---|
| 0201 | 0.600.03 | 0.30.03 | 0.230.03 | 0.100.05 | 0.150.05 |
| 0402 | 1.000.10 | 0.500.05 | 0.300.05 | 0.200.10 | 0.250.10 |
| 0603 | 1.600.10 | 0.800.10 | 0.450.10 | 0.300.15 | 0.250.15 |
| 0805 | 2.000.10 | 1.250.10 | 0.500.10 | 0.350.20 | 0.350.20 |
| 1206 | 3.050.10 | 1.550.10 | 0.500.10 | 0.450.20 | 0.400.20 |
| 1210 | 3.050.10 | 2.600.15 | 0.550.10 | 0.450.20 | 0.500.20 |
| 2010 | 5.000.10 | 2.500.15 | 0.550.10 | 0.450.20 | 0.500.20 |
| 2512 | 6.350.10 | 3.100.15 | 0.550.10 | 0.600.20 | 0.500.20 |
| Test Item | Conditions | Specifications |
|---|---|---|
| Temperature Coefficient of Resistance (TCR) | TCR (ppm / ) R2R1 R1T2T1106 R1: Resistance at room temp. R2: Resistance at -55 or +125 T1: Room temp. T2: -55 or +125 | According to JIS-C5201-1 4.8 |
| Short Time Overload | Apply 2.5 times rated voltage for 5 seconds, rest for 30 mins. | Resistance change rate: 0.5%/1%: (1.0%+0.05), 5%: (2.0%+0.10). Appearance: No damage, short circuit, or burn. |
| Intermittent Overload | Apply 2.5 times rated voltage, 1 sec ON, 25 sec OFF, 10000+400/-0 cycles. | Resistance change rate: 1: (5.0%+0.10). <1: (5.0%+0.001). Appearance: No damage, short circuit, or burn. |
| Terminal Strength | Test 1: Apply 5N force for 10 sec to rear. Test 2: Gradually apply force to rear. | Test 1: No damage, no conductor detachment, no body fracture. Test 2: Pulling force 5N. |
| Resistance to Solvent | Immerse in isopropyl alcohol at 20~25 for 50.5 mins, rest for 48 hrs. | Resistance change rate: 1: (1.0%+0.05). Appearance: No damage, no leaching of protective or tin layer. |
| Solderability | Pre-treatment: 4 hrs aging at 105, 100% RH, 1.22105 pa. Immerse in 2355 solder for 2 sec. | Soldered area > 95%. |
| Resistance to Soldering Heat | Test 1 (Solder bath): Immerse in 260+5/-0 for 10 sec+1/-0, rest 60 mins. Test 2 (Solder bath): Immerse in 260+5/-0 for 30+1/-0 sec. Test 3 (Soldering iron): 35010, 3+1/-0 sec. | Test 1: Resistance change rate: 1: (1.0%+0.05). Appearance: No abnormalities. Test 2: Soldered area > 95%. No underlying material visible at electrode edge. Test 3: Resistance change rate: 1: (1.0%+0.05). Appearance: No abnormalities. |
| Bending Test | Apply force to center of test board with chip resistor mounted. Downward depth: 0201/0402=5mm, 0603/0805=3mm, 1206+=2mm. | Resistance change rate: 1: (1.0%+0.05). Appearance: No damage, no detachment, no fracture. |
| Resistance to Dry Heat | 1000+48/-0 hrs in oven at 1555 (1253 for RTT01). | Resistance change rate: 0.1%/0.5%/1%: (1.0%+0.05), 2%/5%: (2.0%+0.10). Appearance: No damage, short circuit, or burn. |
| Thermal Shock | 300 cycles: -55 (15 min), +125 (15 min). | Resistance change rate: 0.1%/0.5%/1%: (1.0%+0.05), 2%/5%: (2.0%+0.05). Appearance: No damage, short circuit, or burn. |
| Moisture Load Life | 90 min ON, 30 min OFF, 1,000 hrs at 402, 90~95% RH, with rated voltage applied. | Resistance change rate: 1%: (1.0%+0.05), 5%: (2.0%+0.10). Appearance: No damage, short circuit, or burn. |
| Load Life | 90 min ON, 30 min OFF, 1,000 hrs in oven at 702, with rated voltage applied. | Resistance change rate: 1%: (1.0%+0.05), 5%: (2.0%+0.10). Appearance: No damage, short circuit, or burn. |
2209081200_VO-SCR2512J1R5_C5140293.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
