<
>
Specifications
Resistance:
39Ω
Power(Watts):
1W
Voltage Rating:
200V
Operating Temperature:
-55℃~+155℃
Type:
Thick Film Resistor
Temperature Coefficient:
±100ppm/℃
Tolerance:
±5%
Mfr. Part #:
2512 ±5% 39Ω
Package:
2512
Key Attributes
Model Number:
2512 ±5% 39Ω
Product Description
Product Overview
This document specifies the standards for SCR series Thick Film Chip Resistors, which are lead-free and halogen-free. These resistors are general-purpose components designed for a wide range of applications. The product is manufactured by Anhui Xiang Sheng Technology Co., Ltd. and adheres to RoHS requirements.
Product Attributes
- Brand: VIC (implied by website and development vision)
- Origin: Anhui, China
- Material: Thick Film
- Certifications: RoHS compliant (lead-free)
Technical Specifications
| Type | Rated Power | Max. Rated Voltage | Max. Overload Voltage | T.C.R (ppm/) | Resistance Range (F/D) | Resistance Range (J) | JUMPER Resistance | Operating Temperature Range |
| 0201 | 1/8W | 25V | 50V | 400 | 1R9.1 | 1R9.1 | 50m MAX. | -55~ +125 |
| 0402 | 1/8W | 50V | 100V | 100 | 10R1M | --- | 50m MAX. | -55~ +155 |
| 400 | 1R9.1 | 1R9.1 | ||||||
| 200 | 1MR10M | 10R10M | ||||||
| 0603 | 1/10W | 75V | 150V | 100 | 10R1M | --- | 50m MAX. | -55~ +155 |
| 400 | 1R9.1 | 1R9.1 | ||||||
| 200 | 1MR10M | 10R10M | ||||||
| 0805 | 1/8W | 150V | 300V | 100 | 10R1M | --- | 50m MAX. | -55~ +155 |
| 400 | 1R9.1 | 1R9.1 | ||||||
| 200 | 1MR10M | 10R10M | ||||||
| 1206 | 1/4W | 200V | 400V | 100 | 10R1M | --- | 50m MAX. | -55~ +155 |
| 400 | 1R9.1 | 1R9.1 | ||||||
| 200 | 1MR10M | 10R10M | ||||||
| 1210 | 1/2W | 200V | 400V | 100 | 10R1M | --- | 50m MAX. | -55~ +155 |
| 400 | 1R9.1 | 1R9.1 | ||||||
| 200 | 1MR10M | 10R10M | ||||||
| 2010 | 3/4W | 200V | 400V | 100 | 10R1M | --- | 50m MAX. | -55~ +155 |
| 400 | 1R9.1 | 1R9.1 | ||||||
| 200 | 1MR10M | 10R10M | ||||||
| 2512 | 1W | 200V | 400V | 100 | 10R1M | --- | 50m MAX. | -55~ +155 |
| 400 | 1R9.1 | 1R9.1 | ||||||
| 200 | 1MR10M | 10R10M |
| Type | L (mm) | W (mm) | H (mm) | L1 (mm) | L2 (mm) |
| 0201 | 0.600.03 | 0.30.03 | 0.230.03 | 0.100.05 | 0.150.05 |
| 0402 | 1.000.10 | 0.500.05 | 0.300.05 | 0.200.10 | 0.250.10 |
| 0603 | 1.600.10 | 0.800.10 | 0.450.10 | 0.300.15 | 0.250.15 |
| 0805 | 2.000.10 | 1.250.10 | 0.500.10 | 0.350.20 | 0.350.20 |
| 1206 | 3.050.10 | 1.550.10 | 0.500.10 | 0.450.20 | 0.400.20 |
| 1210 | 3.050.10 | 2.600.15 | 0.550.10 | 0.450.20 | 0.500.20 |
| 2010 | 5.000.10 | 2.500.15 | 0.550.10 | 0.450.20 | 0.500.20 |
| 2512 | 6.350.10 | 3.100.15 | 0.550.10 | 0.600.20 | 0.500.20 |
| Test Item | Conditions | Specifications |
| Temperature Coefficient of Resistance (TCR) | Measured at -55 or +125 relative to room temperature. | Refer to Specification Table |
| Short Time Overload | 2.5x rated voltage for 5 seconds. | Resistance change: 0.5%/1%: (1.0%+0.05); 5%: (2.0%+0.10). No visible damage. |
| Intermittent Overload | 2.5x rated voltage, 1 sec ON, 25 sec OFF, 10000 cycles. | Resistance change: 1: (5.0%+0.10); <1: (5.0%+0.001). No visible damage. |
| Terminal Strength | Test 1: 5N force for 10 sec. Test 2: Max. peel strength. | Test 1: No damage, no detachment. Test 2: 5N. |
| Resistance to Solvent | Immersed in Isopropyl alcohol for 5 min. | Resistance change: (1.0%+0.05). No visible damage. |
| Solderability | Pre-conditioning: 105, 100% RH, 1.22x10^5 Pa for 4 hrs. Immersion in 2355 tin for 2 sec. | Soldered area >95%. |
| Resistance to Soldering Heat | Test 1: Immersion in 260+5/-0 tin bath for 10 sec. Test 2: Immersion in 260+5/-0 tin bath for 30 sec. Test 3: Soldering iron at 35010 for 3 sec. | Test 1&3: Resistance change: (1.0%+0.05). No electrode damage. Test 2: Soldered area >95%. No underlying material visible. |
| Bending Test | Applied load on center of test board. Deflection: 5mm (0201/0402), 3mm (0603/0805), 2mm (1206+). | Resistance change: (1.0%+0.05). No visible damage. |
| Resistance to Dry Heat | 1000 hrs at 1555 (1253 for RTT01). | Resistance change: 0.1%,0.5%,1%: (1.0%+0.05); 2%,5%: (2.0%+0.10). No visible damage. |
| Thermal Shock | -55 for 15 min, +125 for 15 min, 300 cycles. | Resistance change: 0.1%,0.5%,1%: (1.0%+0.05); 2%,5%: (2.0%+0.05). No visible damage. |
| Moisture Load Life | 402, 90-95% RH, 90 min ON, 30 min OFF, 1000 hrs. | Resistance change: 1%: (1.0%+0.05); 5%: (2.0%+0.10). No visible damage. |
| Load Life | 702, 90 min ON, 30 min OFF, 1000 hrs. | Resistance change: 1%: (1.0%+0.05); 5%: (2.0%+0.10). No visible damage. |
2109021730_VO-2512--5--39R_C2889856.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
