<
>
Specifications
Power(Watts):
125mW
Resistance:
10Ω
Operating Temperature:
-55℃~+155℃
Type:
Thick Film Resistor
Temperature Coefficient:
±100ppm/℃
Tolerance:
±5%
Mfr. Part #:
HPCR0402-R-100JT
Package:
0402
Key Attributes
Model Number:
HPCR0402-R-100JT
Product Description
Product Overview
The Venkel HPCR Series High Power Resistors are designed for demanding applications requiring robust performance and reliability. Featuring an alumina substrate and a resistive layer, these resistors offer good power dissipation capabilities and are available in sizes from 0402 to 1210. They are suitable for a wide range of resistance values, including a 0 jumper option, and offer low TCR options. The standard termination is 100% matte Tin over Nickel, providing excellent solderability.
Product Attributes
- Brand: Venkel
- Series: HPCR
- Termination: 100% matte Tin over Nickel
- Substrate Material: Alumina
- Protective Coating: Yes
- Barrier Layer Material: Nickel
Technical Specifications
| Feature | Description |
|---|---|
| Available Sizes | 0402, 0603, 0805, 1206, 1210 |
| Resistance Values | 1 to 1M, plus 0 Jumper |
| TCR (Temperature Coefficient of Resistance) | As low as 100 PPM |
| Termination | 100% matte Tin over Nickel with wrap-around termination |
| Marking | Standard 3 or 4-digit marking code (depending on size and tolerance), alpha-numeric for 0603 - 1% E-96 values. 0402 size cannot be marked. |
Electrical Specifications & Range (at 70C)
| Size | Power Rating (W) | Max. Working Voltage | Operating Temp. Range | Zero Ohm (Jumper) Current Rating | Zero Ohm (Jumper) Resistance | Tolerance | TCR | Resistance Range |
|---|---|---|---|---|---|---|---|---|
| 0402 | 0.125W (1/8W) | PR or 50V whichever is less | -55C to +155C | 1.5A | 20 m (max) | 1% (F) 5% (J) | 100ppm 200ppm | 10 - 1M 1 - 9.76 |
| 0603 | 0.25W (1/4W) | PR or 75V whichever is less | -55C to +155C | 2A | 20 m (max) | 1% (F) 5% (J) | 100ppm 200ppm | 10 - 1M 1 - 9.76 |
| 0805 | 0.33W (1/3W) | PR or 150V whichever is less | -55C to +155C | 2.5A | 20 m (max) | 1% (F) 5% (J) | 100ppm 200ppm | 10 - 1M 1 - 9.76 |
| 1206 | 0.50W (1/2W) | PR or 200V whichever is less | -55C to +155C | 3.5A | 20 m (max) | 1% (F) 5% (J) | 100ppm 200ppm | 10 - 1M 1 - 9.76 |
| 1210 | 0.75W (3/4W) | PR or 200V whichever is less | -55C to +155C | 4.5A | 20 m (max) | 1% (F) 5% (J) | 100ppm 200ppm | 10 - 1M 1 - 9.76 |
Dimensions (inches/mm)
| SIZE | L | W | T | C1 | C2 |
|---|---|---|---|---|---|
| 0402 | 0.040 0.002 (1.0 0.05) | 0.020 0.002 (0.5 0.05) | 0.014 0.002 (0.35 .05) | 0.008 0.004 (0.2 0.1) | 0.008 0.004 (0.2 0.1) |
| 0603 | 0.063 0.004 (1.6 0.1) | 0.031 0.004 (0.8 0.1) | 0.018 0.004 (0.45 0.1) | 0.012 0.007 (0.30 0.20) | 0.012 0.007 (0.30 0.20) |
| 0805 | 0.079 0.006 (2.0 0.10) | 0.050 0.003 (1.25 0.10) | 0.019 0.003 (0.50 0.10) | 0.014 0.007 (0.35 0.20) | 0.015 0.007 (0.40 0.20) |
| 1206 | 0.122 0.003 (3.10 0.10) | 0.061 0.003 (1.55 0.10) | 0.021 0.003 (0.55 0.10) | 0.020 0.009 (0.50 0.25) | 0.020 0.008 (0.50 0.20) |
| 1210 | 0.122 0.003 (3.10 0.10) | 0.10 0.006 (2.60 0.15) | 0.021 0.003 (0.55 0.10) | 0.020 0.009 (0.50 0.25) | 0.020 0.008 (0.50 0.20) |
Environmental Characteristics
| Test | Requirement (1% and below) | Requirement (5%) | Requirement (Jumper) | Test Method |
|---|---|---|---|---|
| Temperature Coefficient of Resistance (T.C.R.) | As Spec. | JIS-C-5201-1 4.8 / IEC-60115-1 4.8 | ||
| Short Time Overload | (1.0%+0.05) | (2.0%+0.05) | <50m | JIS-C-5201-1 4.13 / IEC-60115-1 4.13 |
| Insulation Resistance | 10G | JIS-C-5201-1 4.6 / IEC-60115-1 4.6 | ||
| Endurance | (1.0%+0.10) | (2.0%+0.10) | <100m | JIS-C-5201-1 4.25 / IEC-60115-1 4.25.1 |
| Damp Heat with Load | (1.0%+0.10) | (2.0%+0.10) | <100m | JIS-C-5201-1 4.24 / IEC-60115-1 4.24 |
| Dry Heat | (1.0%+0.05) | (1.5%+0.10) | <50m | JIS-C-5201-1 4.23 / IEC-60115-1 4.23.2 |
| Bending Strength | (1.0%+0.05) | (1.0%+0.05) | <50m | JIS-C-5201-1 4.33 / IEC-60115-1 4.33 |
| Solderability | 95% min. coverage | JIS-C-5201-1 4.17 / IEC-60115-1 4.17 | ||
| Resistance to Soldering Heat | (0.5%+0.05) | (1.0%+0.05) | <50m | JIS-C-5201-1 4.18 / IEC-60115-1 4.18 |
| Voltage Proof | No breakdown or flashover | JIS-C-5201-1 4.7 / IEC-60115-1 4.7 | ||
| Leaching | Individual leaching area 5% / Total leaching area 10% | JIS-C-5201-1 4.18 / IEC-60068-2-58 8.2.1 | ||
| Rapid Change of Temperature | (0.5%+0.05) | (1.0%+0.05) | <50m | JIS-C-5201-1 4.19 / IEC-60115-1 4.19 |
Packaging Specifications
| TAPE SIZE (in) | A | B | W | E | F | T | G | H | J | D |
|---|---|---|---|---|---|---|---|---|---|---|
| 0402 | 1.15 0.10 | 0.65 0.10 | 8.0 0.20 | 1.75 0.10 | 3.50 0.05 | 0.45 0.10 | 2.00 0.05 | 4.00 0.10 | 2.00 0.05 | 1.50 0.10 |
| 0603 | 1.90 0.10 | 1.10 0.10 | 8.0 0.20 | 1.75 0.10 | 3.50 0.05 | 0.70 0.10 | 4.00 0.10 | 4.00 0.10 | 2.00 0.05 | 1.50 0.10 |
| 0805 | 2.40 0.10 | 1.65 0.10 | 8.0 0.20 | 1.75 0.10 | 3.50 0.05 | 0.85 0.10 | 4.00 0.10 | 4.00 0.10 | 2.00 0.05 | 1.50 0.10 |
| 1206 | 3.50 0.10 | 1.90 0.10 | 8.0 0.20 | 1.75 0.10 | 3.50 0.05 | 0.85 0.10 | 4.00 0.10 | 4.00 0.10 | 2.00 0.05 | 1.50 0.10 |
| 1210 | 3.50 0.10 | 2.80 0.10 | 8.0 0.20 | 1.75 0.10 | 3.50 0.05 | 0.85 0.10 | 4.00 0.10 | 4.00 0.05 | 2.00 0.05 | 1.50 0.10 |
Reel Specifications: Minimum of 30 empty pockets at the beginning of reel, 65 minimum empty pockets at the end.
Peel Back Force and Direction: Follow EIA481-1-A. Peel back force between 0.1N 1.3N and peel back angle of 165 180.
2412091105_Venkel-HPCR0402-R-100JT_C4291215.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
