Online Service

Online Service

Contact Person
+86 136 6733 2386
quality Metal Film Fixed Resistors UNI ROYAL MFR0W4F3300A50 Lead Free with Stable Electrical Characteristics factory
<
quality Metal Film Fixed Resistors UNI ROYAL MFR0W4F3300A50 Lead Free with Stable Electrical Characteristics factory
>
Specifications
Type:
Metal Film Resistor
Resistance:
330Ω
Voltage-Supply(Max):
250V
Power(Watts):
250mW
Temperature Coefficient:
±50ppm/℃
Tolerance:
±1%
Mfr. Part #:
MFR0W4F3300A50
Package:
Through Hole,D2.2xL6.5mm
Key Attributes
Model Number: MFR0W4F3300A50
Product Description

UNIROYAL ELECTRONICS INDUSTRY CO., LTD. - LEAD-FREE METAL FILM FIXED RESISTORS (MFR SERIES)

This document specifies the Lead-Free Metal Film Fixed Resistors manufactured by UNIOHM. These resistors are designed for various electronic applications requiring precise resistance values and stable performance.

Product Attributes

  • Brand: UNIROYAL ELECTRONICS INDUSTRY CO., LTD. (UNIOHM)
  • Origin: CHINA
  • Product Name: LEAD-FREE METAL FILM FIXED RESISTORS
  • Part Name: MFR SERIES
  • Certifications: Implied compliance with JIS C 0802 for marking.

Technical Specifications

TypePower RatingDimensions (mm) D x L x d0.05H3Max Working VoltageMax Overload VoltageDielectric Withstanding VoltageToleranceResistance Range
MF 1/8W1/8W1.90.3 x 3.30.3 x 0.4528200V400V400V1%2%10~1M
MF 1/8W1/8W1.90.3 x 3.30.3 x 0.4528200V400V400V5%1~1M
MF 1/4W1/4W2.20.3 x 6.51.0 x 0.5428250V500V500V1%2%10~1M
MF 1/4W1/4W2.20.3 x 6.51.0 x 0.5428250V500V500V5%1~1M
MF 1/2W1/2W3.00.6 x 9.51.0 x 0.5428350V700V700V1%2%10~1M
MF 1/2W1/2W3.00.6 x 9.51.0 x 0.5428350V700V700V5%1~1M
MF 1W1W4.50.6 x 11.51.0 x 0.6528500V1000V1000V1%2%51.1~1M
MF 1W1W4.50.6 x 11.51.0 x 0.6528500V1000V1000V5%1~1M
MF 2W2W5.00.6 x 15.51.0 x 0.7028500V1000V1000V1%2%51.1~1M
MF 2W2W5.00.6 x 15.51.0 x 0.7028500V1000V1000V5%1~1M
MF 3W3W6.00.6 x 17.51.0 x 0.7528500V1000V1000V1%2%51.1~1M
MF 3W3W6.00.6 x 17.51.0 x 0.7528500V1000V1000V5%1~1M
MF 1/4WS1/4WS1.90.5 x 3.30.3 x 0.4528200V400V200V1%2%10~1M
MF 1/4WS1/4WS1.90.5 x 3.30.3 x 0.4528200V400V200V5%1~1M
MF 0.4WSS0.4WSS1.90.5 x 3.30.3 x 0.4528200V400V200V1%2%10~1M
MF 0.4WSS0.4WSS1.90.5 x 3.30.3 x 0.4528200V400V200V5%1~1M
MF 1/2WSS1/2WSS2.20.5 x 6.50.5 x 0.5428250V500V250V1%10~1M
MF 1/2WSS1/2WSS2.20.5 x 6.50.5 x 0.5428250V500V250V2%5%1~1M
MF 1/2WS1/2WS2.70.5 x 9.01.0 x 0.5428350V700V700V1%2%10~1M
MF 1/2WS1/2WS2.70.5 x 9.01.0 x 0.5428350V700V700V5%1~1M
MF 0.6WS0.6WS2.20.5 x 6.51.0 x 0.5428250V500V250V1%10~1M
MF 0.6WS0.6WS2.20.5 x 6.51.0 x 0.5428250V500V250V2%5%1~1M
MF 1WS1WS3.50.6 x 9.51.0 x 0.6028350V700V350V1%2%5%10~1M
MF 2WS2WS4.00.6 x 11.51.0 x 0.6528500V1000V350V1%2%5%10~1M
MF 3WS3WS5.00.6 x 15.51.0 x 0.7028500V1000V350V1%2%5%10~1M

Specification Details

ItemLimitsTest Method
Temperature Coefficient0.1% 15 PPM/Max.4.8 Natural resistance changes per temp. Degree centigrade R2 R1 R1(T2 T1) 106(PPM/) R1: resistance value at room temp. (T1) R2: resistance value at room temp. +100 (Tt2) Test pattern: room temp. (T1), room temp. +100(T2)
Temperature Coefficient0.25% 25 PPM/Max.
Temperature Coefficient0.5% 50PPM/Max.
Temperature Coefficient1% 50PPM/Max.
Temperature Coefficient2% 100PPM/Max.
Temperature Coefficient5% 200PPM/Max.
Short-time overloadResistance change rate is: (0.5%+0.05)Max. With no evidence of mechanical damage.4.13 Permanent resistance change after the application of a potential of 2.5 times RCWV for 5 seconds.
Dielectric withstanding voltageNo evidence of flashover mechanical damage, arcing or insulation break down.4.7 Resistors shall be clamped in the trough of a 90metallic v-block and shall be tested at ac potential respectively specified in the above list for 60-70 seconds.
Pulse overloadResistance change rate is: (1%+0.05) Max. With no evidence of mechanical damage.4.28 Resistance change after 10,000 cycles (1 second ON , 25 seconds OFF ) at 4 times RCWV.
Resistance to soldering heatResistance change rate is: (1%+0.05) Max. With no evidence of mechanical damage4.18 Permanent resistance change when leads immersed to a point 2.0-2.5mm from the body in 2605 solder for 101 seconds.
Resistance to solventNo deterioration of protective coatings & markings4.29 Specimens shall be immersed in a bath of trichloroethylene completely for 3 min. With ultrasonic
Terminal strengthNo evidence of mechanical damage4.16 Direct load: Resistance to a 2.5 kg direct load for 10 seconds in the direction of the longitudinal axis of the terminal leads. Twist test: Terminal leads shall be bent through 90at a point of about 6mm from the body of the resistor and shall be rotated through 360 about the original axis of the bent terminal in alternating direction for a total of 3 rotations.
Solderability95% coverage Min.4.17 The area covered with a new, smooth, clean, shiny and continuous surface free from concentrated pinholes. Test temp. Of solder:2453 Dwell time in solder: 2~3seconds.
Temperature cyclingResistance change rate is: (1%+0.05) Max.. With no evidence of mechanical damage.4.19 Resistance change after continuous five cycles for duty cycle specified: Step Temperature Time 1 -55 3 30min 2 Room temp. 10 15min 3 +155 2 30min 4 Room temp. 10 15min
Load life in humidityNormal type: 1.5%; flame retardant type: 5%7.9 resistance change after 1,000 hours (1.5 hours ON,0.5 hour OFF) at RCWV in a humidity test chamber controlled at 402 and 90 to 95% relative humidity.
Load lifeNormal type: 1.5%; flame retardant type: 5%4.25.1 permanent resistance change after 1,000 hours operating at RCWV with duty cycle of 1.5 hours ON, 0.5 hour OFF at 702 ambient.

2410121333_UNI-ROYAL-MFR0W4F3300A50_C58608.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max