<
>
Specifications
Power(Watts):
62.5mW
Resistance:
4.02kΩ
Operating Temperature:
-55℃~+155℃
Type:
Thick Film Resistor
Temperature Coefficient:
±100ppm/℃
Tolerance:
±0.5%
Mfr. Part #:
CR0402-16W-4021DT
Package:
0402
Key Attributes
Model Number:
CR0402-16W-4021DT
Product Description
CR Series General Purpose Thick Film Resistors
The CR Series General Purpose Thick Film Resistors are designed for a wide range of applications, offering stable performance over temperature and good power dissipation capabilities. Constructed with an alumina substrate, these resistors feature a tin plating over nickel with wrap-around termination for excellent solderability. They are available in various sizes from 01005 to 2512 and offer TCR as low as 100ppm. Some values are available for conductive epoxy applications, making them suitable for MRI applications.
Product Attributes
- Brand: Venkel
- Series: CR Series
- Material: Alumina Substrate
- Termination Finish: 100% matte Tin (Sn) over Nickel
Technical Specifications
| Feature | Description |
|---|---|
| Structure Components | 1. Alumina Substrate, 2. Backside Electrode, 3. Topside Electrode, 4. Edge Electrode, 5. Nickel Plating, 6. Tin Plating, 7. Primary Coating, 8. Secondary Layer, 9. Resistive layer, 10. Marking |
| Available Sizes | 01005 to 2512 |
| TCR | As low as 100ppm |
| Power Dissipation | Good capabilities (conservatively rated) |
| Termination | 100% matte Tin over Nickel with wrap around termination |
| Special Application | Some values available for conductive epoxy application (suitable for MRI) |
Dimensions
| SIZE | L (inches/mm) | W (inches/mm) | T (inches/mm) | C1 (inches/mm) | C2 (inches/mm) |
|---|---|---|---|---|---|
| 01005 | 0.016 0.0008 (0.4 0.02) | 0.008 0.0008 (0.2 0.02) | 0.005 0.0008 (0.13 0.02) | 0.003 0.001 (0.08 0.03) | 0.003 0.001 (0.08 0.03) |
| 0201 | 0.024 0.002 (0.6 0.05) | 0.012 0.001 (0.3 0.02) | 0.010 0.002 (0.25 0.05) | 0.020 0.008 (0.50 0.20) | 0.006 0.002 (0.15 0.05) |
| 0402 | 0.040 0.002 (1.0 0.05) | 0.020 0.002 (0.5 0.05) | 0.014 0.002 (0.35 .05) | 0.008 0.004 (0.2 0.1) | 0.008 0.004 (0.2 0.1) |
| 0603 | 0.063 0.004 (1.6 0.1) | 0.031 0.004 (0.8 0.1) | 0.018 0.004 (0.45 0.1) | 0.012 0.006 (0.30 0.15) | 0.012 0.006 (0.30 0.15) |
| 0805 | 0.079 0.006 (2.0 0.15) | 0.050 0.006 (1.25 0.15) | 0.018 0.006 (0.45 0.15) | 0.014 0.006 (0.35 0.15) | 0.014 0.006 (0.35 0.15) |
| 1206 | 0.126 0.006 (3.2 0.15) | 0.063 0.006 (1.6 0.15) | 0.022 0.006 (0.56 0.15) | 0.020 0.008 (0.50 0.20) | 0.020 0.008 (0.50 0.20) |
| 1210 | 0.126 0.006 (3.2 0.15) | 0.098 0.006 (2.50 0.15) | 0.022 0.006 (0.56 0.15) | 0.020 0.008 (0.50 0.20) | 0.020 0.008 (0.50 0.20) |
| 2010 | 0.197 0.006 (5.0 0.15) | 0.098 0.006 (2.50 0.15) | 0.022 0.006 (0.56 0.15) | 0.026 0.008 (0.65 0.25) | 0.024 0.008 (0.60 0.20) |
| 2512 (1W) | 0.248 0.006 (6.3 0.15) | 0.126 0.006 (3.2 0.15) | 0.022 0.006 (0.56 0.15) | 0.026 0.008 (0.65 0.25) | 0.024 0.008 (0.60 0.20) |
| 2512 (2W) | 0.248 0.006 (6.3 0.15) | 0.126 0.006 (3.2 0.15) | 0.024 0.008 (0.60 0.20) | 0.024 0.008 (0.60 0.20) | 0.020 0.008 (0.50 0.20) |
Electrical Specifications
| SIZE | Power Rating at 70C (W) | Max. Working Voltage | Max. Overload Voltage | Operating Temp. Range | Zero Ohm (Jumper) Current Rating | Zero Ohm (Jumper) Resistance |
|---|---|---|---|---|---|---|
| 01005 | 0.03W (1/32W) | PR or 15V whichever is less | 30V | -55C to +125C | 0.5A | 50 m (max) |
| 0201 | 0.05W (1/20W) | PR or 25V whichever is less | 50V | -55C to +125C | 0.5A | 50 m (max) |
| 0402 | 0.063W (1/16W) | PR or 50V whichever is less | 100V | -55C to +155C | 1A | 50 m (max) |
| 0603 | 0.10W (1/10W) | PR or 75V whichever is less | 150V | -55C to +155C | 1A | 50 m (max) |
| 0805 | 0.063W (1/16W) | PR or 150V whichever is less | 300V | -55C to +155C | 2A | 50 m (max) |
| 1206 | 0.10W (1/10W) | PR or 150V whichever is less | 300V | -55C to +155C | 2A | 50 m (max) |
| 1210 | 0.10W (1/10W) | PR or 150V whichever is less | 300V | -55C to +155C | 2.5A | 50 m (max) |
| 2010 | 0.125W (1/8W) | PR or 200V whichever is less | 400V | -55C to +155C | 3.5A | 50 m (max) |
| 2512 (1W) | 0.25W (1/4W) | PR or 200V whichever is less | 400V | -55C to +155C | 4A | 50 m (max) |
| 2512 (2W) | 0.50W (1/2W) | PR or 200V whichever is less | 500V | -55C to +155C | 4A | 50 m (max) |
Resistance Range & Tolerance
| SIZE | Tolerance | TCR | Resistance Range |
|---|---|---|---|
| 01005, 0201 | 0.5% (D), 1% (F), 5% (J) | 100ppm, 200ppm, 250ppm, 300ppm | 1 - 10M |
| 0402 | 0.5% (D), 1% (F), 5% (J) | 100ppm, 200ppm, 250ppm, 300ppm | 1 - 10M |
| 0603 | 0.5% (D), 1% (F), 5% (J) | 100ppm, 200ppm, 250ppm, 300ppm | 1 - 10M |
| 0805 | 0.5% (D), 1% (F), 5% (J) | 100ppm, 200ppm, 300ppm, 350ppm | 1 - 22M |
| 1206 | 0.5% (D), 1% (F), 5% (J) | 100ppm, 200ppm, 300ppm, 350ppm | 1 - 22M |
| 1210 | 0.5% (D), 1% (F), 5% (J) | 100ppm, 200ppm, 300ppm | 1 - 21.5M |
| 2010 | 0.5% (D), 1% (F), 5% (J) | 100ppm, 200ppm, 300ppm | 1 - 20M |
| 2512 (1W) | 0.5% (D), 1% (F), 5% (J) | 100ppm, 200ppm, 300ppm | 1 - 20M |
| 2512 (2W) | 0.5% (D), 1% (F), 5% (J) | 100ppm, 200ppm, 300ppm | 1 - 20M |
Marking Code Information
General Notes:
- 1% E-24 values for 0603 size and larger are typically marked with the standard 3 digit marking code.
- 1% E-96 values for 0805 size and larger may or may not be marked with the standard 4 digit marking code.
- 5% E-24 values for 0603 size and larger, will be marked with standard 3 digit marking code.
- 0603 -1% E-96 values will be marked with a standard 3 digit alpha numeric code.
- 01005, 0201 and 0402 cannot be marked.
- 5% E-24 values for 1210~2512, may be marked with 4 digit marking code.
- E-192 values will not typically be marked.
E96 Marking Code Structure:
- A Two-Digit Number Code is assigned to each standard Resistance Value per E96 guidelines (Decade value listings).
- This is followed by an Alpha Code System which is a multiplier for the value table.
- Each letter, from "A "Z, represents a specific multiplier.
Example:
- Value: 01A - 01 means 100 and A = 1. Result: 100 x 1.0 = 100 Ohm
- Value: 25C - 25 means 178 and C = 100. Result: 178 x 100 = 17.8K Ohm
- Value: 93D - 93 means 909 and D = 1000. Result: 909 x 1000 = 909K Ohm
Letter Multiplier Cross Reference:
- A 100
- B 101
- C 102
- D 103
- E 104
- F 105
- G 106
- H 107
- X 10-1
- Y 10-2
- Z 10-3
- (Letter multipliers may also come in lower case.)
Derating Curve
A derating curve is provided showing rated power percentage versus ambient temperature for 01005 & 0201 sizes and 0402 to 2512 sizes.
Environmental Characteristics
| ITEM REQUIREMENT | TEST METHOD | 1% and Below | 5% | Jumper |
|---|---|---|---|---|
| Temperature Coefficient of Resistance (T.C.R.) | JIS-C-5201-1 4.8 IEC-60115-1 4.8 | As Spec. | As Spec. | As Spec. |
| Short Time Overload | JIS-C-5201-1 4.13 IEC-60115-1 4.13 | (1.0%+0.05) | (2.0%+0.05) | <50m |
| Insulation Resistance | JIS-C-5201-1 4.6 IEC-60115-1 4.6 | 10G | 10G | 10G |
| Endurance | JIS-C-5201-1 4.25 IEC-60115-1 4.25.1 | (1.0%+0.10) | (2.0%+0.10) | <100m |
| Damp Heat with Load | JIS-C-5201-1 4.24 IEC-60115-1 4.24 | (1.0%+0.10) | (2.0%+0.10) | <100m |
| Dry Heat | JIS-C-5201-1 4.23 IEC-60115-1 4.23.2 | (1.0%+0.05) | (1.5%+0.10) | <50m |
| Bending Strength | JIS-C-5201-1 4.33 IEC-60115-1 4.33 | (1.0%+0.05) | (1.0%+0.05) | <50m |
| Solderability | JIS-C-5201-1 4.17 IEC-60115-1 4.17 | 95% min. coverage | 95% min. coverage | 95% min. coverage |
| Resistance to Soldering Heat | JIS-C-5201-1 4.18 IEC-60115-1 4.18 | (0.5%+0.05) | (1.0%+0.05) | <50m |
| Voltage Proof | JIS-C-5201-1 4.7 IEC-60115-1 4.7 | No breakdown or flashover | No breakdown or flashover | No breakdown or flashover |
| Leaching | JIS-C-5201-1 4.18 IEC-60068-2-58 8.2.1 | Individual leaching area 5% Total leaching area 10% | Individual leaching area 5% Total leaching area 10% | Individual leaching area 5% Total leaching area 10% |
| Rapid Change of Temperature | JIS-C-5201-1 4.19 IEC-60115-1 4.19 | (0.5%+0.05) | (1.0%+0.05) | <50m |
Note: RCWV (Rated Continuous Working Voltage)=(P*R ) or Max. Operating Voltage whichever is lower. Storage Temperature: 15~28C; Humidity: < 80%RHC.
Tape & Reel Specifications
| SIZE | TAPE SIZE A (mm) | TAPE SIZE B (mm) | TAPE SIZE W (mm) | TAPE SIZE E (mm) | TAPE SIZE F (mm) | TAPE SIZE T (mm) | TAPE SIZE G (mm) | TAPE SIZE H (mm) | TAPE SIZE J (mm) | TAPE SIZE D (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| 01005 | 0.45 0.05 | 0.25 0.05 | 8.0 0.2 | 1.75 0.1 | 3.5 0.05 | 0.40 0.10 | 2.0 0.05 | 4.0 0.1 | 2.0 0.05 | 1.5 + 0.1-0 |
| 0201 | 0.7 0.08 | 0.4 0.08 | 8.0 0.2 | 1.75 0.1 | 3.5 0.05 | 0.42 0.20 | 2.0 0.05 | 4.0 0.1 | 2.0 0.05 | 1.5 + 0.1-0 |
| 0402 | 1.15 0.1 | 0.65 0.1 | 8.0 0.2 | 1.75 0.1 | 3.5 0.05 | 0.45 0.10 | 2.0 0.05 | 4.0 0.1 | 2.0 0.05 | 1.5 + 0.1-0 |
| 0603 | 1.9 0.1 | 1.1 0.1 | 8.0 0.2 | 1.75 0.1 | 3.5 0.05 | 0.70 0.10 | 4.0 0.1 | 4.0 0.1 | 2.0 0.05 | 1.5 + 0.1-0 |
| 0805 | 2.4 0.1 | 1.65 0.1 | 8.0 0.2 | 1.75 0.1 | 3.5 0.05 | 0.85 0.10 | 4.0 0.1 | 4.0 0.1 | 2.0 0.05 | 1.5 + 0.1-0 |
| 1206 | 3.5 0.2 | 1.9 0.1 | 8.0 0.2 | 1.75 0.1 | 3.5 0.05 | 0.85 0.10 | 4.0 0.1 | 4.0 0.1 | 2.0 0.05 | 1.5 + 0.1-0 |
| 1210 | 3.5 0.1 | 2.8 0.2 | 8.0 0.2 | 1.75 0.1 | 3.5 0.05 | 0.85 0.10 | 4.0 0.1 | 4.0 0.1 | 2.0 0.05 | 1.5 + 0.1-0 |
| 2010 (Embossed) | 5.4 0.2 | 2.9 0.2 | 12.0 0.3 | 1.75 0.1 | 5.5 0.5 | 1.2 | 4.0 0.1 | 4.0 0.1 | 2.0 0.05 | 1.5 + 0.1-0 |
| 2512 (Embossed) | 6.8 0.2 | 3.6 0.2 | 12.0 0.3 | 1.75 0.1 | 5.5 0.5 | 1.2 | 4.0 0.1 | 4.0 0.1 | 2.0 0.05 | 1.5 + 0.1-0 |
All dimensions in mm. Minimum of 30 empty pockets at the beginning of reel, 65 minimum empty pockets at the end. Peel back force should be between 0.1N 1.3N and peel back angle of 165 180.
2404081403_Venkel-CR0402-16W-4021DT_C3955603.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
