<
>
Specifications
Type:
Metal Film Resistor
Resistance:
1.8kΩ
Voltage-Supply(Max):
250V
Power(Watts):
250mW
Temperature Coefficient:
±50ppm/℃
Tolerance:
±1%
Mfr. Part #:
MFR0W4F1801A50
Package:
Through Hole,D2.2xL6.5mm
Key Attributes
Model Number:
MFR0W4F1801A50
Product Description
UNIROYAL ELECTRONICS INDUSTRY CO., LTD. - LEAD-FREE METAL FILM FIXED RESISTORS (MFR SERIES)
This document specifies the Lead-Free Metal Film Fixed Resistors manufactured by UNIOHM. These resistors are designed for various applications requiring precise resistance values and high reliability.
Product Attributes
- Brand: UNIROYAL ELECTRONICS INDUSTRY CO., LTD. (UNIOHM)
- Origin: CHINA
- Product Name: LEAD-FREE METAL FILM FIXED RESISTORS
- Part Name: MFR SERIES
- Certifications: Not explicitly mentioned, but implies compliance with JIS standards.
Technical Specifications
| Type | Power Rating | Dimensions (mm) D x L | Lead Diameter (mm) | Max. Working Voltage (V) | Max. Overload Voltage (V) | Dielectric Withstanding Voltage (V) | Tolerance | Resistance Range |
| MF 1/8W | 1/8W | 1.90.3 x 3.30.3 | 0.45 | 200 | 400 | 400 | 1%, 2% | 10~1M |
| MF 1/8W | 1/8W | 1.90.3 x 3.30.3 | 0.45 | 200 | 400 | 400 | 5% | 1~1M |
| MF 1/4W | 1/4W | 2.20.3 x 6.51.0 | 0.54 | 250 | 500 | 500 | 1%, 2% | 10~1M |
| MF 1/4W | 1/4W | 2.20.3 x 6.51.0 | 0.54 | 250 | 500 | 500 | 5% | 1~1M |
| MF 1/2W | 1/2W | 3.00.6 x 9.51.0 | 0.54 | 350 | 700 | 700 | 1%, 2% | 10~1M |
| MF 1/2W | 1/2W | 3.00.6 x 9.51.0 | 0.54 | 350 | 700 | 700 | 5% | 1~1M |
| MF 1W | 1W | 4.50.6 x 11.51.0 | 0.65 | 500 | 1000 | 1000 | 1%, 2% | 51.1~1M |
| MF 1W | 1W | 4.50.6 x 11.51.0 | 0.65 | 500 | 1000 | 1000 | 5% | 1~1M |
| MF 2W | 2W | 5.00.6 x 15.51.0 | 0.70 | 500 | 1000 | 1000 | 1%, 2% | 51.1~1M |
| MF 2W | 2W | 5.00.6 x 15.51.0 | 0.70 | 500 | 1000 | 1000 | 5% | 1~1M |
| MF 3W | 3W | 6.00.6 x 17.51.0 | 0.75 | 500 | 1000 | 1000 | 1%, 2% | 51.1~1M |
| MF 3W | 3W | 6.00.6 x 17.51.0 | 0.75 | 500 | 1000 | 1000 | 5% | 1~1M |
| MF 1/4WS | 1/4W | 1.90.5 x 3.30.3 | 0.45 | 200 | 400 | 200 | 1%, 2% | 10~1M |
| MF 1/4WS | 1/4W | 1.90.5 x 3.30.3 | 0.45 | 200 | 400 | 200 | 5% | 1~1M |
| MF 0.4WSS | 0.4W | 1.90.5 x 3.30.3 | 0.45 | 200 | 400 | 200 | 1%, 2% | 10~1M |
| MF 0.4WSS | 0.4W | 1.90.5 x 3.30.3 | 0.45 | 200 | 400 | 200 | 5% | 1~1M |
| MF 1/2WSS | 1/2W | 2.20.5 x 6.50.5 | 0.54 | 250 | 500 | 250 | 1% | 10~1M |
| MF 1/2WSS | 1/2W | 2.20.5 x 6.50.5 | 0.54 | 250 | 500 | 250 | 2%, 5% | 1~1M |
| MF 1/2WS | 1/2W | 2.70.5 x 9.01.0 | 0.54 | 350 | 700 | 700 | 1%, 2% | 10~1M |
| MF 1/2WS | 1/2W | 2.70.5 x 9.01.0 | 0.54 | 350 | 700 | 700 | 5% | 1~1M |
| MF 0.6WS | 0.6W | 2.20.5 x 6.51.0 | 0.54 | 250 | 500 | 250 | 1% | 10~1M |
| MF 0.6WS | 0.6W | 2.20.5 x 6.51.0 | 0.54 | 250 | 500 | 250 | 2%, 5% | 1~1M |
| MF 1WS | 1W | 3.50.6 x 9.51.0 | 0.60 | 350 | 700 | 350 | 1%, 2%, 5% | 10~1M |
| MF 2WS | 2W | 4.00.6 x 11.51.0 | 0.65 | 500 | 1000 | 350 | 1%, 2%, 5% | 10~1M |
| MF 3WS | 3W | 5.00.6 x 15.51.0 | 0.70 | 500 | 1000 | 350 | 1%, 2%, 5% | 10~1M |
Specifications Summary
| Item | Limits | Test Method |
| Temperature Coefficient | 0.1% (15 PPM/Max.) | 4.8 Natural resistance changes per temp. Degree centigrade R2 R1 / R1(T2 T1) 106(PPM/) R1: resistance value at room temp. (T1) R2: resistance value at room temp. +100 (Tt2) Test pattern: room temp. (T1), room temp. +100(T2) |
| Temperature Coefficient | 0.25% (25 PPM/Max.) | |
| Temperature Coefficient | 0.5% (50PPM/Max.) | |
| Temperature Coefficient | 1% (50PPM/Max.) | |
| Temperature Coefficient | 2% (100PPM/Max.) | |
| Temperature Coefficient | 5% (200PPM/Max.) | |
| Short-time overload | (0.5%+0.05)Max. With no evidence of mechanical damage. | 4.13 Permanent resistance change after the application of a potential of 2.5 times RCWV for 5 seconds. |
| Dielectric withstanding voltage | No evidence of flashover mechanical damage, arcing or insulation break down. | 4.7 Resistors shall be clamped in the trough of a 90metallic v-block and shall be tested at ac potential respectively specified in the above list for 60-70 seconds. |
| Pulse overload | (1%+0.05) Max. With no evidence of mechanical damage. | 4.28 Resistance change after 10,000 cycles (1 second ON , 25 seconds OFF ) at 4 times RCWV. |
| Resistance to soldering heat | (1%+0.05) Max. With no evidence of mechanical damage | 4.18 Permanent resistance change when leads immersed to a point 2.0-2.5mm from the body in 2605 solder for 101 seconds. |
| Resistance to solvent | No deterioration of protective coatings & markings | 4.29 Specimens shall be immersed in a bath of trichloroethylene completely for 3 min. With ultrasonic |
| Terminal strength | No evidence of mechanical damage | 4.16 Direct load: Resistance to a 2.5 kg direct load for 10 seconds in the direction of the longitudinal axis of the terminal leads. Twist test: Terminal leads shall be bent through 90at a point of about 6mm from the body of the resistor and shall be rotated through 360 about the original axis of the bent terminal in alternating direction for a total of 3 rotations. |
| Solderability | 95% coverage Min. | 4.17 The area covered with a new, smooth, clean, shiny and continuous surface free from concentrated pinholes. Test temp. Of solder:2453 Dwell time in solder: 2~3seconds. |
| Temperature cycling | (1%+0.05) Max.. With no evidence of mechanical damage. | 4.19 Resistance change after continuous five cycles for duty cycle specified: Step Temperature Time 1 -55 3 30min 2 Room temp. 10 15min 3 +155 2 30min 4 Room temp. 10 15min |
| Load life in humidity | Normal type: 1.5%; flame retardant type: 5% | 7.9 resistance change after 1,000 hours (1.5 hours ON,0.5 hour OFF) at RCWV in a humidity test chamber controlled at 402 and 90 to 95% relative humidity. |
| Load life | Normal type: 1.5%; flame retardant type: 5% | 4.25.1 permanent resistance change after 1,000 hours operating at RCWV with duty cycle of 1.5 hours ON, 0.5 hour OFF at 702 ambient. |
2410121333_UNI-ROYAL-MFR0W4F1801A50_C58672.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
