<
>
Specifications
Tolerance:
±20%
Temperature Coefficient:
±100ppm/℃
Power(Watts):
500mW
Resistance:
200Ω
Mfr. Part #:
GF063P1-B201
Package:
Through Hole,6.8x6.8mm
Key Attributes
Model Number:
GF063P1-B201
Product Description
SINGLE TURN CERMET TRIMMERS GF063Series
The GF063 Series Single Turn Cermet Trimmers offer a wide variety of models with excellent performance and high reliability due to their precious metal, multi-contact wiper design. They are suitable for automatic machine adjustment with a cross slot design, and their sealed construction allows for immersion cleaning with various agents. The large diameter shaft facilitates the use of commercially available adjustment drivers.
Product Attributes
- Brand: Not specified
- Origin: Not specified
- Material: Cermet
- Color: Not specified
- Certifications: RoHS compliant
Technical Specifications
| Series | Product Shape | Packaging | Nominal Resistance Range | Resistance Taper | Total Resistance Tolerance | End Resistance | Contact Resistance Variation | Power Rating | Max. Input Voltage | Temp. Coefficient | Insulation Resistance | Dielectric Strength | Electrical Angle | Mechanical Angle | Shaft Torque | Stop Strength | Operating Temp. Range | Terminal Strength | Shaft Strength | Weight |
| GF063 | P, W, U, P1 (Top adjustment) | T (Taping/Reel), T2 (Taping/Ammo pack), M (Magazine/Stick), Blank (Vinyl pack), K (With knob) | 10 to 2M | B (Linear) | 20% (10%) | 1% or 1, whichever is greater | 1% or 1, whichever is greater | 0.5W/70, 0W/125 | 250V DC or V=(WR)1/2, whichever is smaller | 100ppm/ | 1,000M min. (DC 500V) | AC 900V for 1 minute | 210 10 | 250 10 | 0.9819.6mNm (10200gfcm) | 49.0mNm min. (500gfcm min.) | -55 to +125 | 9.8N min. (1kgf tensile) | 3 times min. (90 bend) | 0.41g max. (P1,P,W,U), 0.52g max. (X,X1,S,S1,V) |
| GF063 | X, X1, S, S1, V (Side adjustment) | T (Taping/Reel), T2 (Taping/Ammo pack), M (Magazine/Stick), Blank (Vinyl pack), K (With knob) | 10 to 2M | B (Linear) | 20% (10%) | 1% or 1, whichever is greater | 1% or 1, whichever is greater | 0.5W/70, 0W/125 | 250V DC or V=(WR)1/2, whichever is smaller | 100ppm/ | 1,000M min. (DC 500V) | AC 900V for 1 minute | 210 10 | 250 10 | 0.9819.6mNm (10200gfcm) | 49.0mNm min. (500gfcm min.) | -55 to +125 | 9.8N min. (1kgf tensile) | 3 times min. (90 bend) | 0.41g max. (P1,P,W,U), 0.52g max. (X,X1,S,S1,V) |
Environmental Characteristics
| Test Item | Test Condition | Standard (R/R: Change in total resistance, S.S.: Setting stability) |
| Soldering heat | 350 3 sec. | R/R1% |
| Rotation life | 100 cycles | R/R(2+3%), S.S.2% |
| Load life | 70 0.5W 1000 hours | R/R3% |
| Thermal shock | -55, +125 (30 minutes), 5 cycles | R/R1%, S.S.1% |
| Vibration | 102kHz Amplitude 1.5mm (196m/s2) 12 hours | R/R1%, S.S.1% |
| Shock | 981m/s2 6msec. 6 directions for 3 times each | R/R1%, S.S.1% |
| Low temperature operation | -55, 0.5W 2 hours | R/R2%, S.S.2% |
| High temperature exposure | +125, 250 hours | R/R3%, S.S.2% |
| Moisture and load life | +40, 9095%RH 0.5W 500 hours | R/R2% |
| Moisture resistance | -10+65 (9095%RH) 0.5W 240 hours | R/R3%, S.S.2% |
| Seal test (Hot water immersion) | +85 hot water 1 minute | 3 bubbles max., Possible for washing |
| Solvent resistance | Trichloroethane, IPA etc. | Possible for washing |
2410121250_TOCOS-GF063P1-B201_C128076.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
