Product Specification for Approval

Customer:

Product Description: ALUMINUM ELECTROLYTIC CAPACITORS

Specifications: See list on Page 3

Sincerity P/N: See list on Page 3

Customer P/N: /

Product Brands: Sincerity (Trademark)

Production Date: 2024/10/21

Product Attributes

• Brand: Sincerity (Trademark)
• Origin: Sichuan, China
• Copyright: Sichuan Sincerity Technology Co., Ltd.

Technical Specifications

Notes:

CAP/DF: at 120Hz, 252

L.C: 6.3~120V.DC, I0.01CV or 3A, whichever is greater ; 160~550V.DC, I0.02CV+25A (C = CAP., V = WV), After 2 minute with rated working voltage applied.

Test Instruments:

• Capacitance Meter: CHEN HWA 1061 LCZ METER
• Leakage Current Meter: CHEN HWA CLC-202A

Scope: This specification covers EF series Radial Type Aluminum Electrolytic Capacitors.

Applicable Specification: Consulted JIS-C-5101, JIC-C-5141.

Test Environment: Ambient temperature: 252C, Relative humidity: 655%.

Product Characteristics:

• Electrical Characteristics:
• Rated voltage and Operating Temperature: -40~105 (6.3~120V.DC)
• Capacitance: Measuring frequency: 120Hz 20%; Measuring circuit: Series equivalent circuit; Measuring voltage: 1Vrms; Capacitance tolerance: 20%
• Dissipation Factor: See Table 1 (WV: 6.3 to 120, tg: 0.22 to 0.12). *For capacity > 1000F, loss angle tangent increases by 0.02 for every 1000F increase.
• Leakage Current: DC: 6.3~120V.DC, I0.01CV or 3uA, whichever is greater (I: Leakage Current (), C: Capacitance (F), V: Rated voltage (V)).
• High and Low Temperature Characteristic: Step 2 (Low Temp): Impedance value compared to Step 1, not more than Table 2 requires. Step 4 (High Temp): Capacity value compared to Step 1, change within 20%.
• Surge Voltage Test: Apply surge voltage listed in Table 3, charge 305s, discharge 3305s for 1000 cycles. Test temperature: 15~35. Capacitance Change: Within 20% of initial value. Dissipation Factor: Not more than 200% specified value in Table 1. Leakage Current: Satisfy No. 4.1.4.
• Mechanical Characteristics:
• Termination Strength:
• Tensile strength of termination: At Room temperature, apply tension (see table for force based on wire diameter) for 51 seconds.
• Bending strength of termination: At Room temperature, apply fixed gravity (see table for force based on wire diameter), bend 90 degrees, return, bend 90 degrees opposite, return. Process completed in 5 seconds.
• Vibration: 3 orthogonal directions, 2h each (total 6h). Frequency: 10~55Hz. Amplitude: 1.5mm.
• Solder ability Test: Solder temperature: 2455. Dipping time: 20.5 s. Criteria: At least 90% of circumferential surface of the dipping portion of termination shall be covered with new solder.
• Durability test:
• Load Life Test: Test temperature: 1052C, apply rated voltage and rated ripple current. Test time: 5-6.3 (3000H); 8-10 (5000H); 13 (6000H). Capacitance Change: Within 25% (16V~100V) or 30% (6.3V~10V) of initial value.