<
>
Specifications
Operating Temperature:
-40℃~+105℃
Capacitance:
100uF
Height - Seated (Max):
7mm
Voltage Rating:
35V
Diameter:
6.3mm
Tolerance:
±20%
Mfr. Part #:
SM1V101M6L07CBH1B0LC
Package:
Through Hole,D6.3xL7mm
Key Attributes
Model Number:
SM1V101M6L07CBH1B0LC
Product Description
ALUMINUM ELECTROLYTIC CAPACITORS
This specification covers the SM series Radial Type Aluminum Electrolytic Capacitors. These capacitors are designed for various applications requiring reliable performance and durability.
Product Attributes
- Brand: Sincerity (Trademark)
- Origin: Sichuan, China
- Manufacturer: Sichuan Sincerity Technology Co., Ltd.
Technical Specifications
| Product number | Series | RATE VOLTAGE (V.DC) | Capacitance (uF) | Capacitance Tolerance (%) | DF tan (%) | MAX Leakage Current (uA) | Max. Ripple Current (mA) RMS at 105 120hz | Impedance at 20 100KHz () | Load Life (Hours) | Temperature Range () | Surge Voltage (V.DC) | Dimensions (mm) D | Dimensions (mm) L |
| SM1V101M6L07CBH1B0LC | SM | 35 | 100 | 20 | 0.5 | / | 74 | / | 2000 | -40+105 | 44 | 6.3 | 7 |
| SM1C101M0507BBH1B0LC | SM | 16 | 100 | 20 | 0.5 | / | 60 | / | 2000 | -40+105 | 20 | 5 | 7 |
Note on Test Conditions:
- Capacitance (Cap): Measured at 120Hz 20%, 1Vrms, Series equivalent circuit. Tolerance: 20%.
- Dissipation Factor (DF tan): See Table 1 in source document for specific values based on WV. For capacities > 1000F, DF increases by 0.02 for every 1000F increase.
- Leakage Current (LC): Measured after 2 minutes with rated working voltage applied. For 6.3~50V.DC, I 0.01CV or 3A, whichever is greater.
- High and Low Temperature Characteristic: Impedance at -40C compared to +20C, and capacitance change at 105C compared to +20C are specified.
- Surge Voltage Test: 1000 cycles of 305s charge and 3305s discharge. Capacitance change within 20%, DF not more than 200% of Table 1, LC to satisfy 4.1.4.
- Mechanical Characteristics: Includes tensile and bending strength of termination, vibration resistance, and solderability.
- Durability Test (Load Life): 2000 hours at 1052C with rated voltage and ripple current. Capacitance change within 25% (16V~100V) or 30% (6.3V~10V), DF not more than 200% of initial value, LC to satisfy 4.1.4.
- Shelf Life Test: 1000-0 +48h at 1052C with no voltage applied.
- Solder-Heat-Resistance: Tested at 2605C for 101s on a 1.6mm PCB. Capacitance change within 10%, DF not more than initial value, LC to satisfy 4.1.4.
- Safety Vent: Applicable for aluminum case diameter 8.
- Resistance to damp heat: Tested at 402C, 90~95% RH for 5008h.
2411121111_SRD-SM1V101M6L07CBH1B0LC_C41430169.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
