<
>
Specifications
Impedance @ Frequency:
600Ω@100MHz
Voltage Rating - DC:
50V
Number of Lines:
2
DC Resistance(DCR):
120mΩ
Operating Temperature:
-25℃~+105℃
Current Rating:
1A
Mfr. Part #:
SRCM.3225.601TT00
Package:
SMD-4P,3.2x2.5mm
Key Attributes
Model Number:
SRCM.3225.601TT00
Product Description
Product Overview
The SRD-WI-17168 is a common mode choke designed for electronic applications. It is manufactured by Shenzhen Sorvida Electronics Co., Ltd. and is suitable for various usage scenarios requiring effective noise suppression.
Product Attributes
- Brand: Sorvida ()
- Origin: Shenzhen, China
- Material: Ni-Zn Ferrite Core, Sn-0.7Cu Solder, Copper Wire P180-G1
Technical Specifications
| Part Number | Impedance () 25% | Test Freq. (MHz) | DCR Max. () | Rated Voltage Vdc (max.) | Rated Current (mA)(max.) | Withstand Volt. (Vdc) max. | IR () min. |
| SRCM.3225.601TT10 | 600 | 100 | 0.20 | 50 | 1000 | 125 | 10M |
| Item | Specifications | Test Methods |
| Solder- Ability | More than 90% of termination should be covered with new solder. | Solder: Sn, Temperature: 255+5/-0, Flux: rosin, Duration: 3.50.5s |
| Leaching Resistance | More than 75% of termination Should be covered with new solder. | Solder: Sn, Temperature:270+2/-0, Flux: rosin, Duration: 100.5s |
| Drop | No mechanical damage shall be noticed; Impedance shall be within 20% of the initial value | Drop 10 times on a concrete floor from a height of 1m. |
| Vibration | - | Frequency: 10 to 55Hz, Amplitude: 1.52mm, Direction and time: X, Y and Z directions for 2 hours each. |
| Humidity resistance | a. Test condition: Temp. 405, Humidity 90%~95%, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. | - |
| High temperature resistance | a. Test condition: Applied rated current, Temp. 855, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. | - |
| Low temperature resistance | No mechanical damage shall be noticed; Impedance shall be within 20% of the initial value | a. Test condition: Temp. -405, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. |
| Thermal shock | a. Test condition: 1) Temp. -40, time: 303min 2) Temp. +85, time: 303min, 100 cycles b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. | - |
2410121312_SOREDE-SRCM-3225-601TT00_C5122953.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
