Product Specification for Approval

Customer:

Product Description: ALUMINUM ELECTROLYTIC CAPACITORS

Specifications: See list on Page 3

Sincerity P/N: See list on Page 3

Customer P/N: /

Product Brands: Sincerity (Trademark)

Production Date: 2024/10/21

Product Attributes

• Brand: Sincerity (Trademark)
• Origin: Sichuan, China
• Certifications: Consulted JIS-C-5101, JIC-C-5141

Technical Specifications

Notes:

• CAP/DF: at 120Hz, 252
• L.C: 6.3~120V.DC, I0.01CV or 3A, whichever is greater; 160~550V.DC, I0.02CV+25A (C = CAP., V = WV), After 2 minute with rated working voltage applied.
• Product Outer View Diagram
• Test Instruments:
• 1. Cap: CHEN HWA 1061 LCZ METER
• 2. LC: CHEN HWA CLC-202A

Product Overview

This specification covers EF series Radial Type Aluminum Electrolytic Capacitors. The product is designed for various applications requiring reliable capacitance and performance across a wide temperature range. Applicable standards include JIS-C-5101 and JIC-C-5141. Standard test conditions involve an ambient temperature of 252 and relative humidity of 655%.

Product Characteristics

Electrical Characteristics

• Rated voltage and Operating Temperature: -40~105 (6.3~120V.DC)
• Capacitance: Test frequency 120Hz 20%, Measuring circuit: Series equivalent circuit, Test voltage: 1Vrms. Capacitance tolerance: 20%.
• Dissipation Factor: See Table 1. For capacities > 1000F, loss angle tangent increases by 0.02 for every 1000F increase.
• Leakage Current: Rated voltage applied, 100010% protective resistor, measured after 2 min. DC: 6.3~120V.DC, I0.01CV or 3uA, whichever is greater (I: Leakage Current (), C: Capacitance (F), V: Rated voltage (V)).
• High and Low Temperature Characteristic: Impedance at -40 compared to 20 should not exceed values in Table 2. Capacitance change at 105 compared to 20 should be within 20%.
• Surge Voltage Test: 1000 cycles of 305 sec charge and 3305 sec discharge with surge voltages listed in Table 3. Capacitance change within 20% of initial value. Dissipation Factor not more than 200% of Table 1 value. Leakage Current to satisfy No. 4.1.4.

Mechanical Characteristics

• Termination Strength:
• Tensile strength: Applied tension for 51 sec at room temperature.
• Bending strength: Fixed gravity applied, bent 90 degrees, returned, then bent 90 degrees opposite, returned, all within 5 sec.
• Criteria: No intermittent contacts, open or short-circuiting. No visible mechanical damage.
• Vibration: 2 hours in 3 orthogonal directions (total 6 hours). Frequency: 10~55Hz. Amplitude: 1.5mm. Sweep rate: 1 min. Criteria: No intermittent contacts, open or short-circuiting. No visible mechanical damage.
• Solderability Test: Solder temperature: 2455. Dipping time: 20.5 s. Criteria: At least 90% of the dipped termination surface area covered with new solder.

Durability Test

• Load Life Test: Test temperature: 1052, applied rated voltage and rated ripple current. Test time: 5-6.3 (3000H); 8-10 (5000H); 13 (6000H). Capacitance Change: Within 25% (16V~100V) or 30% (6.3V~10V) of initial value.

Contact Information:

Sichuan Sincerity Technology Co., Ltd.

Tel: +86-830-6520000

Fax: +86-830-6523333

E-mail: srd@srdkj.com

Http: //www.srdkj.com

Address: Jiangnan Sci. & Tech Industry Park, No. 9 Chuangxin Rd., Lantian Street, Jiangyang District, Luzhou, Sichuan, China

Copyright: This specification is the copyright of Sichuan Sincerity Technology Co., Ltd., it cannot be copied or provided to a third party without permission. Please Sign back the electronic file or copy after you acknowledge the specification, as the basis for the technical review of the contract.