<
>
Specifications
Impedance @ Frequency:
500Ω@100MHz
Insulation Resistance(IR):
10MΩ
Voltage Rating - DC:
125V
Number of Lines:
2
DC Resistance(DCR):
8mΩ
Operating Temperature:
-25℃~+105℃
Current Rating:
5.5A
Mfr. Part #:
SBCM.9070.YF501TT00
Package:
SMD-4P,9x7mm
Key Attributes
Model Number:
SBCM.9070.YF501TT00
Product Description
Product Overview
This document specifies the Sorede SBCM.9070.YF series common mode choke. It details the product's construction, electrical characteristics, packaging, and reliability testing to ensure quality and performance.
Product Attributes
- Brand: Sorede
- Origin: Shenzhen, China
- Manufacturer: (Shenzhen Sorede Electronics Co., Ltd.)
- Certifications: UL FILE NO. (for materials)
Technical Specifications
| Part Number | Impedance (@100MHz) Min | Impedance (@100MHz) Typ | DCR (m) max. | Rated Current (A)Max | Rated Volt. (Vdc)max | IR (M) min. | MARK |
| SBCM.9070.YF301TT00 | 225 | 300 | 6 | 6 | 80 | 10 | 301 |
| SBCM.9070.YF501TT00 | 450 | 600 | 8 | 5.5 | 80 | 10 | 501 |
| SBCM.9070.YF701TT00 | 500 | 700 | 10 | 5 | 80 | 10 | 701 |
| SBCM.9070.YF102TT00 | 750 | 1000 | 13 | 4 | 80 | 10 | 102 |
| SBCM.9070.YF222TT00 | 1700 | 2200 | 50 | 3 | 80 | 10 | 222 |
| SBCM.9070.YF272TT00 | 2000 | 2700 | 80 | 2 | 80 | 10 | 272 |
| SBCM.9070.YF302TT00 | 2500 | 3000 | 80 | 2 | 80 | 10 | 302 |
| Item | Specifications | Test Methods |
| Solder- Ability | More than 90% of termination should be covered with new solder. | Solder: Sn, Temperature: 255+5/-0, Flux: rosin, Duration: 3.50.5s |
| Leaching Resistance | More than 75% of termination Should be covered with new solder. | Solder: Sn, Temperature: 270+2/-0, Flux: rosin, Duration: 100.5s |
| Drop | No mechanical damage shall be noticed Impedance shall be within 20% of the initial value | Drop 10 times on a concrete floor from a height of 1m. |
| Vibration | - | Frequency: 10 to 55Hz, Amplitude: 1.52mm, Direction and time: X, Y and Z directions for 2 hours each. |
| Humidity resistance | a. Test condition: Temp. 405, Humidity: 90%~95%, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. | - |
| High temperature resistance | a. Test condition: Applied rated current, Temp. 855, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. | - |
| Low temperature resistance | No mechanical damage shall be noticed Impedance shall be within 20% of the initial value | a. Test condition: Temp. -405, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. |
| Thermal shock | a. Test condition: 1) Temp. -40, time: 303min 2) Temp. +85, time: 303min, 100 cycles. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test. | - |
2505191720_SOREDE-SBCM-9070-YF501TT00_C5122967.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
