<
>
Specifications
Impedance @ Frequency:
300Ω@100MHz
Insulation Resistance(IR):
10MΩ
Voltage Rating - DC:
125V
Number of Lines:
2
DC Resistance(DCR):
10mΩ
Operating Temperature:
-25℃~+105℃
Current Rating:
5A
Mfr. Part #:
SBCM.7060.YF301TT0
Package:
SMD-4P,7x6mm
Key Attributes
Model Number:
SBCM.7060.YF301TT0
Product Description
Common Mode Choke Coil - Specification for Approval
This document outlines the specifications for the SBCM.7060.YF series common mode choke coils manufactured by Shenzhen Sorede Electronics Co., Ltd. These components are designed for noise suppression applications.
Product Attributes
- Brand: Sorede
- Manufacturer: Shenzhen Sorede Electronics Co., Ltd.
- Address: 3rd Floor, Building A6, Yuanchuangyuanlu, No. 8 Xintang Village, Fucheng Street, Guanlan Town, Shenzhen.
- Tel: 0755-29803356
- Fax: 0755-29803506
- Email: sorde@vip.163.com
- Website: http// www.szsorede.com
Technical Specifications
| Part Number | Impedance (@100MHz) Min | Impedance (@100MHz) Typ | DCR (m) max. | Rated Current (A)Max | Rated Volt. (Vdc)max | IR (M) min. | MARK |
|---|---|---|---|---|---|---|---|
| SBCM.7060.YF400TT00 | 40 | 70 | 5 | 15 | 125 | 10 | 400 |
| SBCM.7060.YF101TT00 | 100 | 140 | 10 | 9 | 125 | 10 | 101 |
| SBCM.7060.YF301TT00 | 225 | 300 | 10 | 5 | 125 | 10 | 301 |
| SBCM.7060.YF501TT00 | 275 | 450 | 10 | 5 | 125 | 10 | 501 |
| SBCM.7060.YF601TT00 | 500 | 700 | 15 | 4 | 125 | 10 | 601 |
| SBCM.7060.YF701TT00 | 500 | 700 | 15 | 4 | 125 | 10 | 701 |
| SBCM.7060.YF102TT00 | 800 | 1020 | 17 | 3 | 125 | 10 | 102 |
| SBCM.7060.YF132TT00 | 910 | 1300 | 21 | 2.5 | 125 | 10 | 132 |
| SBCM.7060.YF272TT00 | 2000 | 2700 | 63 | 1 | 125 | 10 | 272 |
| SBCM.7060.YF302TT00 | 2500 | 3000 | 75 | 0.9 | 125 | 10 | 302 |
Notes:
- Operating temperature range: -40 to +125 (Including Self-heating)
- Storage temperature range: -40 to +125
- Impedance measure condition: 100MHz, 0.5V.
- Rated current: The value of DC current when the temperature rise is T40 (Ta=25).
Material List
| NO. | PARTS | MATERIAL SPECIFICATIONS | TEMP. CLASS |
|---|---|---|---|
| 1 | CORE | FERRITE FENGYIN OR EQ | NA |
| 2 | WIRE | P180 Grd1 ELEKTRISOL A OR EQ | 180 |
| 3 | CASE | LCP LIAN CHENG OR EQ | NA |
| 4 | ADHESIVE | EPOXY RESIN NAGASE OR EQ | NA |
| 5 | SOLDER | Sn99.3:Cu0.7 SHENMAO OR EQ | NA |
Packaging
Tape Packing Diagram: (Refer to page 4/8 for detailed diagrams)
- Series: SBCM.7060
- Dimensions (mm): W: 16.00.1, P: 120.1, P1: 4.00.1, P2: 2.00.1, E: 7.50.1, T: 1.750.1, A: 6.60.1, B: 8.20.1, C: 4.20.1, F: 0.400.1
- Reel Dimensions (mm): A: 3300.5, B: 1000.5, C: 13.50.5, W: 16.50.5
- Peeling Strength: 20100g
- Peeling Angle: 165180
- Packing Quantity: Reel: 1500 PCS (13"), Inner box: 4500 PCS (340mm*340mm*65mm), Out box: 13500 PCS (360mm*360mm*225mm)
Reliability Test
| Item | Specifications | Test Methods |
|---|---|---|
| Solder- Ability | More than 90% of termination should be covered with new solder. | Solder: Sn, Temperature: 255+5/-0, Flux: rosin, Duration: 3.50.5s |
| Leaching Resistance | More than 75% of termination Should be covered with new solder. | Solder: Sn, Temperature: 270+2/-0, Flux: rosin, Duration: 100.5s |
| Drop | No mechanical damage shall be noticed Impedance shall be within 20% of the initial value | Drop 10 times on a concrete floor from a height of 1m. |
| Vibration | - | Frequency: 10 to 55Hz, Amplitude: 1.52mm, Direction and time: X, Y and Z directions for 2 hours each. |
| Humidity resistance | - | a. Test condition: Temp. 405, Humidity: 90%~95%, Test time: 50012hr. b. Measurement method: Stabilized at normal condition for 24 hours before test. |
| High temperature resistance | - | a. Test condition: Applied rated current, Temp. 855, Test time: 50012hr. b. Measurement method: Stabilized at normal condition for 24 hours before test. |
| Low temperature resistance | No mechanical damage shall be noticed Impedance shall be within 20% of the initial value | a. Test condition: Temp. -405, Test time: 50012hr. b. Measurement method: Stabilized at normal condition for 24 hours before test. |
| Thermal shock | - | a. Test condition: 1) Temp. -40, time: 303min 2) Temp. +85, time: 303min, 100 cycles. b. Measurement method: Stabilized at normal condition for 24 hours before test. |
Notes
- This product specification guarantees the quality of our product as a single unit. Please ensure your product is evaluated and confirmed against your specifications when our product is mounted.
- We cannot warrant against failure caused by any use of our product that deviates from the intended use as described in this product specification.
- To maintain solderability and packing material condition, control temperature and humidity in the storage area. Recommended conditions: 10 ~ +40, 30~70%RH.
- For storage over six months, solderability shall be checked before actual usage.
- Product weldability decreases over time. It is recommended to use within 8 months from the date of delivery.
- This Specification Approval should be returned with customer's chop within 30 days after receiving it, or it will be considered approved by default.
- For special specification requirements, please contact our technical department.
2505191720_SOREDE-SBCM-7060-YF301TT0_C5122962.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
