<
>
Specifications
Impedance @ Frequency:
1.3kΩ@100MHz
Insulation Resistance(IR):
10MΩ
Voltage Rating - DC:
125V
Number of Lines:
2
DC Resistance(DCR):
21mΩ
Operating Temperature:
-25℃~+105℃
Current Rating:
2.5A
Mfr. Part #:
SBCM7060YF132T
Package:
SMD-4P,7x6mm
Key Attributes
Model Number:
SBCM7060YF132T
Product Description
Product Overview
This document outlines the specifications for the SBCM.7060.YF series common mode chokes. It details product construction, electrical characteristics, packaging, and reliability testing. This product is designed for applications requiring effective noise suppression.
Product Attributes
- Brand: Sorede
- Manufacturer: (Shenzhen Sorede Electronics Co., Ltd.)
- Origin: Shenzhen, China
- Certifications: UL FILE NO. NA (for core and case materials)
Technical Specifications
| Part Number | Series Name | Product Dimensions (mm) | Sealing Way | Impedance (@100MHz) | DCR (m) max. | Rated Current (A)Max | Rated Volt. (Vdc)max | IR (M) min. | MARK | Package |
|---|---|---|---|---|---|---|---|---|---|---|
| SBCM.7060.YF400TT00 | SBCM.7060.YF | 7.00.5 (A), 3.8Max (D), 3.5Typ (E), 1.5Typ (F), 1.7Typ (G), 5.0Typ (H), 1.5Typ (I), 8.0Typ (J), 3.0Typ (K) | Y (Heat seal) | 40 | 5 | 15 | 125 | 10 | 400 | T (Tape/Reel) |
| SBCM.7060.YF101TT00 | SBCM.7060.YF | 7.00.5 (A), 3.8Max (D), 3.5Typ (E), 1.5Typ (F), 1.7Typ (G), 5.0Typ (H), 1.5Typ (I), 8.0Typ (J), 3.0Typ (K) | Y (Heat seal) | 100 | 10 | 9 | 125 | 10 | 101 | T (Tape/Reel) |
| SBCM.7060.YF301TT00 | SBCM.7060.YF | 7.00.5 (A), 3.8Max (D), 3.5Typ (E), 1.5Typ (F), 1.7Typ (G), 5.0Typ (H), 1.5Typ (I), 8.0Typ (J), 3.0Typ (K) | Y (Heat seal) | 225 | 10 | 5 | 125 | 10 | 301 | T (Tape/Reel) |
| SBCM.7060.YF501TT00 | SBCM.7060.YF | 7.00.5 (A), 3.8Max (D), 3.5Typ (E), 1.5Typ (F), 1.7Typ (G), 5.0Typ (H), 1.5Typ (I), 8.0Typ (J), 3.0Typ (K) | Y (Heat seal) | 275 | 10 | 5 | 125 | 10 | 501 | T (Tape/Reel) |
| SBCM.7060.YF601TT00 | SBCM.7060.YF | 7.00.5 (A), 3.8Max (D), 3.5Typ (E), 1.5Typ (F), 1.7Typ (G), 5.0Typ (H), 1.5Typ (I), 8.0Typ (J), 3.0Typ (K) | Y (Heat seal) | 500 | 15 | 4 | 125 | 10 | 601 | T (Tape/Reel) |
| SBCM.7060.YF701TT00 | SBCM.7060.YF | 7.00.5 (A), 3.8Max (D), 3.5Typ (E), 1.5Typ (F), 1.7Typ (G), 5.0Typ (H), 1.5Typ (I), 8.0Typ (J), 3.0Typ (K) | Y (Heat seal) | 500 | 15 | 4 | 125 | 10 | 701 | T (Tape/Reel) |
| SBCM.7060.YF102TT00 | SBCM.7060.YF | 7.00.5 (A), 3.8Max (D), 3.5Typ (E), 1.5Typ (F), 1.7Typ (G), 5.0Typ (H), 1.5Typ (I), 8.0Typ (J), 3.0Typ (K) | Y (Heat seal) | 800 | 17 | 3 | 125 | 10 | 102 | T (Tape/Reel) |
| SBCM.7060.YF132TT00 | SBCM.7060.YF | 7.00.5 (A), 3.8Max (D), 3.5Typ (E), 1.5Typ (F), 1.7Typ (G), 5.0Typ (H), 1.5Typ (I), 8.0Typ (J), 3.0Typ (K) | Y (Heat seal) | 910 | 21 | 2.5 | 125 | 10 | 132 | T (Tape/Reel) |
| SBCM.7060.YF272TT00 | SBCM.7060.YF | 7.00.5 (A), 3.8Max (D), 3.5Typ (E), 1.5Typ (F), 1.7Typ (G), 5.0Typ (H), 1.5Typ (I), 8.0Typ (J), 3.0Typ (K) | Y (Heat seal) | 2000 | 63 | 1 | 125 | 10 | 272 | T (Tape/Reel) |
| SBCM.7060.YF302TT00 | SBCM.7060.YF | 7.00.5 (A), 3.8Max (D), 3.5Typ (E), 1.5Typ (F), 1.7Typ (G), 5.0Typ (H), 1.5Typ (I), 8.0Typ (J), 3.0Typ (K) | Y (Heat seal) | 2500 | 75 | 0.9 | 125 | 10 | 302 | T (Tape/Reel) |
| Item | Specifications | Test Methods |
|---|---|---|
| Solder- Ability | More than 90% of termination should be covered with new solder. | Solder: Sn, Temperature: 255+5/-0, Flux: rosin, Duration: 3.50.5s |
| Leaching Resistance | More than 75% of termination Should be covered with new solder. | Solder: Sn, Temperature: 270+2/-0, Flux: rosin, Duration: 100.5s |
| Drop | No mechanical damage shall be noticed; Impedance shall be within 20% of the initial value | Drop 10 times on a concrete floor from a height of 1m. |
| Vibration | N/A | Frequency: 10 to 55Hz, Amplitude: 1.52mm, Direction and time: X, Y and Z directions for 2 hours each. |
| Humidity resistance | N/A | Test condition: Temp. 405, Humidity: 90%~95%, Test time: 50012hr. Measurement method: Stabilized at normal condition for 24 hours before test. |
| High temperature resistance | N/A | Test condition: Applied rated current, Temp. 855, Test time: 50012hr. Measurement method: Stabilized at normal condition for 24 hours before test. |
| Low temperature resistance | No mechanical damage shall be noticed; Impedance shall be within 20% of the initial value | Test condition: Temp. -405, Test time: 50012hr. Measurement method: Stabilized at normal condition for 24 hours before test. |
| Thermal shock | N/A | Test condition: 1) Temp. -40, time 303min; 2) Temp. +85, time 303min. 100 cycles. Measurement method: Stabilized at normal condition for 24 hours before test. |
2505191720_SOREDE-SBCM7060YF132T_C2827452.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
