Product Overview
The Si MEMS Oscillator Series 7NM is a surface mountable oscillator designed for various electronic applications. It features epoxy molding and a compact 5.0x3.2mm package. This series offers a nominal frequency of 48.000000 MHz with a supply voltage range of 1.8V to 3.3V. It is built to withstand a wide operating temperature range of -40 to 85 and is compliant with RoHS, REACH, and HF environmental standards.
Product Attributes
- Brand: SJK
- Series: 7NM
- Packaging: Epoxy Molding
- Mounting Type: Surface Mount
- Environmental Compliance: RoHS, REACH, HF
- Moisture Sensitivity Level: Level 1
- Minimum Packaging: 1000pcs/real
Technical Specifications
| Symbol | Parameter | Min | Type | Max | Units | Notes |
|---|---|---|---|---|---|---|
| Nominal Frequency | 48.000000 | MHZ | ||||
| Frequency Stability AT 25 | 10 | PPM | ||||
| Frequency Stability Over Operating Temperature range | 15 | PPM | ||||
| Topr | Operating Temperature | -40 | 25 | 85 | ||
| Tstg | Storage Temperature | -55 | 125 | |||
| VDD | Supply Voltage | 1.62 | 3.3 | 3.63 | V | 10% |
| Icc | Input Current | 10 | mA | |||
| Enable Control | Yes | Pad1 | ||||
| CL | Output Load : CMOS | 15 | pF | |||
| VoH | Output Voltage High | 90% | Vdd | V | ||
| VoL | Output Voltage Low | 10% | Vdd | V | ||
| Tr | Rise Time | 5 | ns | 10%90%VDD Level | ||
| Tf | Fall Time | 5 | ns | 90%10%VDD Level | ||
| Symmetry (Duty ratio) | 45 | 55 | % | TH/T | ||
| Tosc | Start-up Time | 10 | ms | |||
| Vhi | Enable Voltage High | 70% | Vdd | V | ||
| Vlo | Disable Voltage Low | 30% | Vdd | V | ||
| Aging | 3 | ppm/yr. | 1st. Year at 25 | |||
| T off | Output Disable Delay Time | 150 | us | |||
| T on | Output Enable Delay Time | 150 | us | |||
| Phase Jitter 12KHZ~20MHZ | 0.5 | 1.0 | ps | |||
| Dimensions | 5.0x3.2 | mm |
Dimensions
5.0x3.2mm
Marking
Information not available in provided text.
Test Circuit
Control input (output enable/disable): Logic 1 or open on pad 1. Oscillator output: Logic 0 on pad 1: Disable output to high impedance.
Waveform Conditions
Waveform measurement system should have a minimum bandwidth of 5 times the frequency being tested.
Output Enable / Disable Delay
The oscillator timing during normal operation is shown in the figure. When the device is in standby, the oscillator stops. When standby is released, the oscillator starts and stable oscillator output occurs after a short delay.
Suggested Reflow Profile
Total time: 200 sec. Max / Solder melting point: 220
Reliability Test Specifications
Mechanical Endurance
| No. | Test Item | Test Methods | REF. DOC |
|---|---|---|---|
| 1 | Drop Test | 75 cm height, 3 times on concrete floor. | JIS C6701 |
| 2 | Mechanical Shock | Device are shocked to half sine wave (1000 G) three mutually perpendicular axes each 3 times. 0.5m sec. duration time. | MIL-STD-202F |
| 3 | Vibration | Frequency range 10 ~ 2000 Hz, Amplitude 1.52 mm/20G, Sweep time 20 minutes. Perpendicular axes each test time 4 Hrs (Total test time 12 Hrs). | MIL-STD-883E |
| 4 | Gross Leak | Standard Sample For Automatic Gross Leak Detector, Test Pressure: 2kg / cm2. | MIL-STD-883E |
| 5 | Fine Leak | Helium Bomging 4.5 kgf / cm 2 for 2 Hrs. | |
| 6 | Solderability | Temperature 245 5, Immersing depth 0.5 mm minimum, Immersion time 5 1 seconds. Flux Rosin resin methyl alcohol solvent (1 : 4). | MIL-STD-883E |
Environmental Endurance
| No. | Test Item | Test Methods | REF. DOC |
|---|---|---|---|
| 1 | Resistance To Soldering Heat | Pre-heat temperature 125 , Pre-heat time 60 ~ 120 sec. Test temperature 260 5 , Test time 10 1 sec. | MIL-STD-202F |
| 2 | High Temp. Storage | + 125 3 for 1000 12 Hrs. | MIL-STD-883E |
| 3 | Low Temp. Storage | - 40 3 for 1000 12Hrs. | MIL-STD-883E |
| 4 | Thermal Shock | Total 100 cycles of the following temperature cycle. | MIL-STD-883E |
| 5 | Pressure Cooker Storage | 121 3 , RH100% , 2 bar , 240Hrs. | JIS C6701 |
| 6 | High TempHumidity | 85 3, RH 85% , 1000 Hrs. | JIS C5023 |
2304131800_SJK-7NM48000C33YC_C668821.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
