Product Overview
The Si MEMS Oscillator Series 1NM is an epoxy-molded, surface-mount oscillator designed for reliable performance. It features a 2.0x1.6mm package and operates within a wide temperature range of -40 to 85. This LVCMOS output oscillator is suitable for various industrial applications requiring precise frequency control. Key features include low input current, fast rise and fall times, and selectable enable/disable functionality.
Product Attributes
- Brand: SJK
- Series: 1NM
- Technology: Si MEMS
- Molding: Epoxy
- Package: 2.0x1.6mm Surface Mount
- Certifications: RoHS, REACH, HF
- Moisture Sensitivity Level: Level 1
- Minimum Packaging: 3000pcs/reel
- Crystal Cutting Type: AT CUT (thickness shear mode)
Technical Specifications
| Parameter | Symbol | Min | Type | Max | Units | Notes |
|---|---|---|---|---|---|---|
| Nominal Frequency | 40.960000 | MHz | ||||
| Frequency Stability AT 25 | 10 | PPM | ||||
| Frequency Stability Over Operating Temperature range | 15 | PPM | ||||
| Operating Temperature | Topr | -40 | 25 | 85 | ||
| Storage Temperature | Tstg | -55 | 125 | |||
| Supply Voltage | VDD | 1.62 | 3.3 | 3.63 | V | 10% |
| Input Current | Icc | 10 | mA | |||
| Enable Control | Yes | Pad1 | ||||
| Output Load: CMOS | CL | 15 | pF | |||
| Output Voltage High | VoH | 90% Vdd | V | |||
| Output Voltage Low | VoL | 10% Vdd | V | |||
| Rise Time | Tr | 5 | ns | 10%90%VDD Level | ||
| Fall Time | Tf | 5 | ns | 90%10%VDD Level | ||
| Symmetry (Duty ratio) | TH/T | 45 | 55 | % | ||
| Start-up Time | Tosc | 10 | ms | |||
| Enable Voltage High | Vhi | 70% Vdd | V | |||
| Disable Voltage Low | Vlo | 30% Vdd | V | |||
| Aging (1st Year at 25) | 3 | ppm/yr. | ||||
| Output Disable Delay Time | T off | 150 | us | |||
| Output Enable Delay Time | T on | 150 | us | |||
| Phase Jitter (12KHZ~20MHZ) | 0.5 | 1.0 | ps |
DIMENSIONS
Units: mm
(Dimensions are not provided in detail in the source text, only the package size 2.0x1.6mm is mentioned in the title.)
MARKING
(Marking details are not provided in the source text.)
TEST CIRCUIT
Control input (output enable/disable): Logic 1 or open on pad 1: Oscillator output. Logic 0 on pad 1: Disable output to high impedance.
WAVEFORM CONDITIONS
Waveform measurement system should have a min. bandwidth of 5 times the frequency being tested.
OUTPUT ENABLE / DISABLE DELAY
The oscillator timing during normal operation is shown. When the device is in standby, the oscillator stops. When standby is released, the oscillator starts and stable oscillator output occurs after a short delay.
SUGGESTED REFLOW PROFILE
Total time: 200 sec. Max / Solder melting point: 220
RELIABILITY TEST SPECIFICATION
1. Mechanical Endurance
| No. | Test Item | Test Methods | REF. DOC |
|---|---|---|---|
| 1 | Drop Test | 75 cm height, 3 times on concrete floor. | JIS C6701 |
| 2 | Mechanical Shock | Device are shocked to half sine wave (1000 G) three mutually perpendicular axes each 3 times. 0.5m sec. duration time. | MIL-STD-202F |
| 3 | Vibration | Frequency range 10 ~ 2000 Hz, Amplitude 1.52 mm/20G, Sweep time 20 minutes. Perpendicular axes each test time 4 Hrs (Total test time 12 Hrs). | MIL-STD-883E |
| 4 | Gross Leak | Standard Sample For Automatic Gross Leak Detector, Test Pressure: 2kg / cm2. | MIL-STD-883E |
| 5 | Fine Leak | Helium Bomging 4.5 kgf / cm 2 for 2 Hrs. | |
| 6 | Solderability | Temperature 245 5, Immersing depth 0.5 mm minimum, Immersion time 5 1 seconds. Flux Rosin resin methyl alcohol solvent (1 : 4). | MIL-STD-883E |
2. Environmental Endurance
| No. | Test Item | Test Methods | REF. DOC |
|---|---|---|---|
| 1 | Resistance To Soldering Heat | Pre-heat temperature 125 , Pre-heat time 60 ~ 120 sec. Test temperature 260 5 , Test time 10 1 sec. | MIL-STD-202F |
| 2 | High Temp. Storage | + 125 3 for 1000 12 Hrs. | MIL-STD-883E |
| 3 | Low Temp. Storage | - 40 3 for 1000 12Hrs. | MIL-STD-883E |
| 4 | Thermal Shock | Total 100 cycles of the following temperature cycle. | MIL-STD-883E |
| 5 | Pressure Cooker Storage | 121 3 , RH100% , 2 bar , 240Hrs. | JIS C6701 |
| 6 | High TempHumidity | 85 3, RH 85% , 1000 Hrs. | JIS C5023 |
2304131800_SJK-1NM40960C33YC_C668745.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
