Online Service

Online Service

Contact Person
+86 136 6733 2386
quality Oscillator with LVCMOS Output SJK 3NM16000C33YC 16 MHz Frequency Stability 10 PPM RoHS REACH Compliant factory
<
quality Oscillator with LVCMOS Output SJK 3NM16000C33YC 16 MHz Frequency Stability 10 PPM RoHS REACH Compliant factory
>
Specifications
Operating Temperature:
-40℃~+85℃
Output Type:
LVCMOS
Frequency Stability:
±25ppm
Frequency:
16MHz
Mfr. Part #:
3NM16000C33YC
Package:
SMD3225-4P
Key Attributes
Model Number: 3NM16000C33YC
Product Description

Product Overview

The Si MEMS Oscillator Series 3NM is a surface mountable oscillator designed with epoxy molding, featuring a 3.2x2.5mm package. It operates within a voltage range of 1.8V to 3.3V and a temperature range of -40C to 85C, offering LVCMOS output. This series is suitable for applications requiring stable frequency output with low phase jitter. Key features include RoHS, REACH, and HF compliance.

Product Attributes

  • Brand: SJK
  • Series: 3NM
  • Package Type: Epoxy Molding, Surface Mount
  • Package Dimensions: 3.2x2.5mm
  • Certifications: RoHS, REACH, HF
  • Moisture Sensitivity Level: Level 1
  • Minimum Packaging: 3000pcs/reel

Technical Specifications

Parameter Symbol Min Type Max Unit Notes
Nominal Frequency 16.000000 MHz
Frequency Stability @ 25 10 PPM
Frequency Stability Over Operating Temperature Range 15 PPM
Operating Temperature Topr -40 25 85
Storage Temperature Tstg -55 125
Supply Voltage VDD 3.3 V 10% (1.62~3.63V)
Input Current Icc 10 mA
Enable Control Yes Pad 1
Output Load: CMOS CL 15 pF
Output Voltage High VoH 90% Vdd
Output Voltage Low VoL 10% Vdd
Rise Time Tr 5 ns 10%90%VDD Level
Fall Time Tf 5 ns 90%10%VDD Level
Symmetry (Duty ratio) TH/T 45 55 %
Start-up Time Tosc 10 ms
Enable Voltage High Vhi 70% Vdd
Disable Voltage Low Vlo 30% Vdd
Aging (1st Year @ 25) 3 ppm/yr.
Output Disable Delay Time T off 150 us
Output Enable Delay Time T on 150 us
Phase Jitter (12KHz~20MHz) 0.5 1.0 ps

Dimensions

Unit: mm

(Dimensions not provided in detail, only package size 3.2x2.5mm is specified)

Marking

(Marking details not provided)

Test Circuit

Control input (output enable/disable): Logic 1 or open on pad 1: Oscillator output. Logic 0 on pad 1: Disable output to high impedance.

Waveform Conditions

Waveform measurement system should have a minimum bandwidth of 5 times the frequency being tested.

Output Enable/Disable Delay

The oscillator timing during normal operation is shown. When the device is in standby, the oscillator stops. When standby is released, the oscillator starts and stable oscillator output occurs after a short delay.

Suggested Reflow Profile

Total time: 200 sec. Max / Solder melting point: 220

Reliability Test Specification

Mechanical Endurance

No. Test Item Test Methods REF. DOC
1 Drop Test 75 cm height, 3 times on concrete floor. JIS C6701
2 Mechanical Shock Device are shocked to half sine wave (1000 G) three mutually perpendicular axes each 3 times. 0.5m sec. duration time MIL-STD-202F
3 Vibration Frequency range 10 ~ 2000 Hz, Amplitude 1.52 mm/20G, Sweep time 20 minutes, Perpendicular axes each test time 4 Hrs (Total test time 12 Hrs) MIL-STD-883E
4 Gross Leak Standard Sample For Automatic Gross Leak Detector, Test Pressure: 2kg / cm2 MIL-STD-883E
5 Fine Leak Helium Bomging 4.5 kgf / cm 2 for 2 Hrs
6 Solderability Temperature 245 5, Immersing depth 0.5 mm minimum, Immersion time 5 1 seconds, Flux Rosin resin methyl alcohol solvent (1 : 4) MIL-STD-883E

Environmental Endurance

No. Test Item Test Methods REF. DOC
1 Resistance To Soldering Heat Pre-heat temperature 125 , Pre-heat time 60 ~ 120 sec., Test temperature 260 5 , Test time 10 1 sec. MIL-STD-202F
2 High Temp. Storage + 125 3 for 1000 12 Hrs MIL-STD-883E
3 Low Temp. Storage - 40 3 for 1000 12 Hrs MIL-STD-883E
4 Thermal Shock Total 100 cycles of the following temperature cycle MIL-STD-883E
5 Pressure Cooker Storage 121 3 , RH100% , 2 bar , 240Hrs JIS C6701
6 High TempHumidity 85 3, RH 85% , 1000 Hrs JIS C5023

2304131800_SJK-3NM16000C33YC_C668785.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max