Miniature Aluminum Electrolytic Capacitors
Miniature aluminum electrolytic capacitors designed for high performance and reliability. Features include low impedance, long life, and solvent-proof characteristics. Ideal for SMPS, IP-Boards, and Adaptors. Available in RoHS compliant and Halogen-free options.
Product Attributes
- Type: Miniature Aluminum Electrolytic Capacitors
- Series: NLC Series
- Marking: DARK BROWN SLEEVE, SILVER INK
- Certifications: KS C IEC 60384-4
- Compliance: RoHS compliant, Halogen-free available
- Features: Low impedance, Long Life, Solvent-proof (Max. Impedance ratio), 10510,000Hrs assured
Technical Specifications
| Rated Voltage (VDC) | Capacitance (F) | Impedance (max./20, 100kHz) | Dissipation Factor (Tan) (at 20, 120Hz) | Dimensions DL (mm) | Rated Ripple Current (mArms/105, 100kHz) |
| 6.3 | 100 | 0.70 | 0.22 | 511 | 175 |
| 6.3 | 150 | 0.70 | 0.22 | 6.311 | 175 |
| 10 | 47 | 0.70 | 0.19 | 511 | 175 |
| 10 | 68 | 0.70 | 0.19 | 511 | 175 |
| 10 | 100 | 0.50 | 0.19 | 6.311 | 252 |
| 16 | 22 | 0.70 | 0.16 | 511 | 175 |
| 16 | 33 | 0.70 | 0.16 | 511 | 175 |
| 16 | 47 | 0.60 | 0.16 | 6.311 | 252 |
| 16 | 68 | 0.50 | 0.16 | 811.5 | 252 |
| 25 | 10 | 0.70 | 0.14 | 511 | 175 |
| 25 | 22 | 0.60 | 0.14 | 511 | 252 |
| 25 | 33 | 0.50 | 0.14 | 6.311 | 252 |
| 25 | 47 | 0.50 | 0.14 | 811.5 | 252 |
| 35 | 10 | 0.70 | 0.12 | 511 | 175 |
| 35 | 15 | 0.70 | 0.12 | 511 | 175 |
| 35 | 22 | 0.60 | 0.12 | 511 | 252 |
| 35 | 33 | 0.50 | 0.12 | 6.311 | 252 |
| 35 | 47 | 0.50 | 0.12 | 811.5 | 252 |
| 50 | 4.7 | 0.80 | 0.10 | 511 | 330 |
| 50 | 10 | 0.70 | 0.10 | 511 | 175 |
| 50 | 15 | 0.70 | 0.10 | 511 | 175 |
| 50 | 22 | 0.60 | 0.10 | 511 | 252 |
| 50 | 33 | 0.50 | 0.10 | 6.311 | 252 |
| 50 | 47 | 0.50 | 0.10 | 811.5 | 252 |
| 63 | 10 | 0.70 | 0.17 | 511 | 175 |
| 63 | 15 | 0.70 | 0.17 | 511 | 175 |
| 63 | 22 | 0.60 | 0.17 | 511 | 252 |
| 63 | 33 | 0.50 | 0.17 | 6.311 | 252 |
| 63 | 47 | 0.50 | 0.17 | 811.5 | 252 |
| 63 | 68 | 0.24 | 0.17 | 815 | 400 |
| 100 | 10 | 0.70 | 0.15 | 511 | 175 |
| 100 | 15 | 0.70 | 0.15 | 511 | 175 |
| 100 | 22 | 0.60 | 0.15 | 511 | 252 |
| 100 | 33 | 0.50 | 0.15 | 6.311 | 252 |
| 100 | 47 | 0.50 | 0.15 | 811.5 | 252 |
| 100 | 68 | 0.24 | 0.15 | 815 | 400 |
Temperature Characteristics
| Rated voltage(VDC) | Z(-25)/Z(+20) | Z(-40)/Z(+20) |
| 6.3 | 4 | 8 |
| 10 | 3 | 6 |
| 16 | 2 | 4 |
| 25~35 | 2 | 3 |
| 50~100 | 2 | 4 |
Leakage Current
I=0.01CV() or 3, whichever is greater. Where, I: Max.Leakage current(), C: Nominal capacitance (), V: Rated voltage (VDC) (at 20, 2 minutes)
Load Life
The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours at 105: Capacitance change 25% of the initial value, Tan 200% of the initial specified value, Leakage current The initial specified value.
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements: Capacitance change 25% of the initial value, Tan 200% of the initial specified value (where, 300% for WV63VDC), Leakage current The initial specified value.
2410010030_SAMYOUNG-NLC50V10M5-11-3-5CC_C2835655.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
