<
>
Specifications
Voltage Rating:
25V
Capacitance:
470nF
Temperature Coefficient:
X7R
Mfr. Part #:
CS1608X7R474K250NRB
Package:
0603
Key Attributes
Model Number:
CS1608X7R474K250NRB
Product Description
Product Overview
This document details the specifications for the MONOLITHIC MULTILAYER CERAMIC CAPACITOR (Thin Layer Large-Capacitance Type) from SAMWHA CAPACITOR CO., LTD. These capacitors are designed for use in computer equipment, communication equipment, industrial equipment, high reliability equipment, and LED equipment.
Product Attributes
- Brand: SAMWHA CAPACITOR CO., LTD.
- Origin: KOREA
- Product Type: Monolithic Multilayer Ceramic Capacitor (Thin Layer Large-Capacitance Type)
- Model Number: CS1608X7R105K250NRB
- Date of Approval: 2017. 12. 22.
- Standard: SW - M - 04B
Technical Specifications
| Item | Specification | Unit | Test Methods and Conditions |
| Capacitance | 1 | Frequency: 1 0.1kHz, Testing Voltage: 1 0.2Vrms | |
| Capacitance Tolerance | 10 | % | |
| Dissipation Factor | Max. 12.5 | % | |
| Insulation Resistance | More than 50 | Applied the rated voltage for 2 minutes of charging. | |
| Chip Size (L) | 1.60 0.15 | ||
| Chip Size (W) | 0.80 0.10 | ||
| Chip Size (T) | 0.80 0.10 | ||
| Operating Temperature Range (X7R) | -55 to +125 | ||
| Operating Temperature Range (X5R) | -55 to +85 | ||
| Operating Temperature Range (Y5V) | -30 to +85 | ||
| Insulation Resistance | 50 F min | Applied the rated voltage for 2 minutes of charging, The charge/discharge current is less than 50mA. | |
| Dielectric Strength (X7R, X5R, Y5V) | The rated voltage 250% - Applied between the terminations for 1 to 5 seconds. - The charge/discharge current is less than 50mA. | ||
| Capacitance Measurement (C 10) | 1 0.1kHz, 0.5~1.0Vrms | Initial measurement Perform the initial measurement according to Note1 for Class . Measurement after test Take it out and set it for 242 hours (Class ) then measure. | |
| Capacitance Measurement (C > 10) | 120 24Hz, 0.50.1Vrms | Initial measurement Perform the initial measurement according to Note1 for Class . Measurement after test Take it out and set it for 242 hours (Class ) then measure. | |
| Dissipation Factor (X7R, X5R) | 12.5%max | ||
| Dissipation Factor (*3216 Size 100 max) | 15% max | ||
| Dissipation Factor (Y5V) | 20%max | ||
| Solderability of Termination | Termination should be covered with more than 75% of new solder | *Pb-Free type Solder: 96.5Sn-3Ag-0.5Cu Solder temperature: 2455 Immersion time: 30.1sec *Pre-Heating: at 80~120 for 10~30sec | |
| Resistance to Soldering Heat (Appearance) | No marking defects | Preheat the capacitor at 120 to 150 for 1 minute. (Preheating for 3225,4520,4532 Step1:100 to 120, 1min Step2:170 to 200, 1min) Immerse the capacitor in a eutectic solder solution at 2605 for 100.5 seconds. Initial measurement Perform the initial measurement according to Note1 for Class Measurement after test Let sit at room temperature for 242 hours,then measure. Capacitance change |
2410121935_SAMWHA-CS1608X7R474K250NRB_C2909628.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
