<
>
Specifications
Voltage Rating:
50V
Capacitance:
100nF
Temperature Coefficient:
-
Tolerance:
±10%
Mfr. Part #:
CS1005X7R104K500NR
Package:
0402
Key Attributes
Model Number:
CS1005X7R104K500NR
Product Description
Multilayer Ceramic Capacitor - Commercial Grade
This document details the specifications for the SAMWHA CAPACITOR CO., LTD. Multilayer Ceramic Capacitor, Commercial Grade, Thin Layer Large-Capacitance Type. These capacitors are primarily designed for use in computer equipment and communication equipment, with potential applications in industrial equipment, high reliability equipment, and LED equipment.
Product Attributes
- Brand: SAMWHA CAPACITOR CO., LTD.
- Origin: KOREA
- Model Number: CS3216X7R475K500NRI
- Type: Thin Layer Large-Capacitance
- Grade: Commercial Grade
Technical Specifications
| Part No. | Type | Capacitance | Capacitance Tolerance | Dissipation Factor | Insulation Resistance | Chip Size (L x W x T) | Temperature Coefficient | Rated Voltage |
| CS3216X7R475K500NRI | Thin Layer Large-Capacitance | 4.7 | 10 % | Max. 12.5 % | More than 10.6 | 3.20 0.30 mm x 1.60 0.20 mm x 1.60 0.20 mm | X7R (-55 to +125) | 50V DC |
Detailed Specifications & Test Methods
| Item | Specification | Test Methods and Conditions |
| Operating Temperature Range | X7R: -55 to +125 | |
| Insulation Resistance | 50 F min | Applied the rated voltage for 2 minutes of charging. The charge/discharge current is less than 50mA. |
| Dielectric Strength | No defects or abnormalities | The rated voltage 250% - Applied between the terminations for 1 to 5 seconds. - The charge/discharge current is less than 50mA. |
| Capacitance | Within the specified tolerance | Measured at 25 at the frequency and voltage shown in the table. Capacitance Frequency Voltage C 10 1 0.1kHz 0.5~1.0Vrms C>10 120 24Hz 0.50.1Vrms |
| Dissipation Factor | X7R: 12.5%max | |
| Solderability of Termination | Termination should be covered with more than 75% of new solder | *Pb-Free type Solder: 96.5Sn-3Ag-0.5Cu Solder temperature: 2455 Immersion time: 30.1sec *Pre-Heating: at 80~120 for 10~30sec |
| Resistance to Soldering Heat | Appearance: No defects which may affect performance | Preheat the capacitor at 120 to 150 for 1 minute. Immerse the capacitor in a eutectic solder solution at 2605 for 100.5 seconds. |
2410121935_SAMWHA-CS1005X7R104K500NR_C513772.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
