<
>
Specifications
Voltage Rating:
10V
Capacitance:
220nF
Temperature Coefficient:
X5R
Tolerance:
±10%
Mfr. Part #:
CS1005X5R224K100NR
Package:
0402
Key Attributes
Model Number:
CS1005X5R224K100NR
Product Description
Multilayer Ceramic Capacitor - Commercial Grade
This document outlines the specifications for the SAMWHA Multilayer Ceramic Capacitor, Commercial Grade, Thin Layer Large-Capacitance Type. Designed for reliability and performance, these capacitors are primarily utilized in computer and communication equipment, as well as industrial and high-reliability applications including LED equipment.
Product Attributes
- Brand: SAMWHA CAPACITOR CO., LTD.
- Origin: KOREA
- Product Type: Multilayer Ceramic Capacitor
- Grade: Commercial Grade
- Type: Thin Layer Large-Capacitance Type
- Model Number: CS3216X5R226K160NRI
Technical Specifications
| Part Number | Type | Capacitance | Capacitance Tolerance | Dissipation Factor | Insulation Resistance | Chip Size (L x W x T) | Operating Temperature Range | Rated Voltage |
| CS3216X5R226K160NRI | Thin Layer Large-Capacitance | 22 ㎳ | ±10% | Max. 12.5% | More than 2.27 MΩ | 3.20 ±0.30 x 1.60 ±0.20 x 1.60 ±0.20 mm | -55 to +85℃ (X5R) | 16V DC |
Detailed Specifications
| Item | Specification | Test Methods and Conditions |
| Capacitance | 22 ㎳ | Frequency: 120 ±24 Hz, Testing Voltage: 0.5 ±0.1 Vrms |
| Capacitance Tolerance | ±10% | |
| Dissipation Factor | Max. 12.5% | |
| Insulation Resistance | More than 2.27 MΩ | Applied the rated voltage for 2 minutes of charging. |
| Chip Size | 3.20 ±0.30 mm (L) | |
| 1.60 ±0.20 mm (W) | ||
| 1.60 ±0.20 mm (T) | ||
| Capacitance Tolerance Code | K | ±10% |
| Voltage Code | 160 | 16V DC |
| Termination Code | N | Ni-Sn (Nickel-Tin Plate) |
| Packing Code | R | 7" Reel Type |
| Thickness Option | I | 1.60 mm ±0.20 |
| Operating Temperature Range | X5R: -55 to +85℃ | |
| Insulation Resistance | 50 F min Ω | Applied the rated voltage for 2 minutes of charging, The charge/discharge current is less than 50mA. |
| Dielectric Strength | No defects or abnormalities | Rated voltage × 250% - Applied between the terminations for 1 to 5 seconds. The charge/discharge current is less than 50mA. |
| Capacitance Measurement | C ≤ 10㎳: 1 ±0.1 kHz, 0.5~1.0 Vrms C > 10㎳: 120 ±24 Hz, 0.5 ±0.1 Vrms | Initial measurement according to Note1 for Class Ⅱ. Measurement after test: 24±2 hours (Class Ⅱ). |
| Dissipation Factor | X5R: 12.5%max | |
| Solderability of Termination | Termination should be covered with more than 75% of new solder | *Pb-Free type Solder: 96.5Sn-3Ag-0.5Cu, Solder temperature: 245±5℃, Immersion time: 3±0.1sec, Pre-Heating: at 80~120℃ for 10~30sec |
| Resistance to Soldering Heat | Appearance: No defects which may affect performance | Preheat the capacitor at 120 to 150℃ for 1 minute. Immerse the capacitor in a eutectic solder solution at 260±5℃ for 10±0.5 seconds. Initial measurement. Measurement after test: Let sit at room temperature for 24±2 hours, then measure. |
| Capacitance change (after soldering heat) | X5R: Within±7.5% | |
| Dissipation Factor (after soldering heat) | X5R: 12.5%max |
2410121820_SAMWHA-CS1005X5R224K100NR_C7545808.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
