Product Overview
This document outlines the Approval Specification for Metal Current Sensing Chip Resistors, specifically the 2512, 1206, and 0805 series. These resistors offer high power capabilities up to 3W, low TCR down to 50ppm/, and are suitable for reflow and wave soldering. They feature halogen-free epoxy, lead-free plating, superior mechanical strength, excellent high-frequency characteristics, and are RoHS compliant.
Product Attributes
- Brand: (Changzhou Pengke Electronics)
- Origin: China
- Material: Metal Alloy
- Certifications: RoHS compliant, Halogen Free
Technical Specifications
| Product Series | Type Designation | Power Rating | Resistance Range | TCR | Operating Temperature Range | Resistance Tolerance | Insulation Resistance | Max. Operating Voltage |
| 2512 DD/XD | HI XD 25 N R001 F | 2W/3W | 0mR 1m 1m<R 2m 2m<R 500m | 350ppm/ 100ppm/ 50 ppm/ | -55 ~ +170 | F:1% G:2% J:5% | Over 100M | (P*R) |
| 1206 RC | HI XD 12 Rxxx F | 1W | 0mR 2m 2m<R 200m | 350ppm/ 50 ppm/ | -55 ~ +170 | F:1% G:2% J:5% | Over 100M | (P*R) |
| 0805 RE | HI XD 08 Rxxx F | 0.5W | 5mR 15m | 50ppm/ | -55 ~ +170 | F:1% G:2% J:5% | Over 100M | (P*R) |
Construction and Dimension
| Series | L (mm) | W (mm) | T (mm) | A (mm) | Electrode Type |
| 2512 | 6.40.20 | 3.20.20 | 0.80.20 | DD:2.00.20 (R4 m) XD:1.00.20 (R0.5 m) | DD: Large Electrode XD: Small Electrode |
| 1206 | 3.20.20 | 1.60.20 | 0.70.20 (0m R<10m) 0.450.20 (10m<R 200m) | 0.60.20 | RC: 1206 |
| 0805 | 2.00.10 | 1.250.10 | 0.50.20 | 0.350.20 | RE: 0805 |
Land Pattern Dimensions
| Series | a (mm) | b (mm) | L (mm) |
| 0805 RE | 1.5 | 1 | 1 |
| 1206 RC | 1.8 | 1.7 | 1.6 |
| 2512 XD | 4 | 2.1 | 4.1 |
| 2512 DD | 4 | 3.1 | 1.3 |
Reliability Tests
| Project | Test Method | Specifications and Requirements |
| Temperature coefficient (TCR) | Measured at 25(T1, R1) and 125(T2, R2), TCR=(R2-R1)/R1T2-T1*10^6 | Refer to TCR specifications for physical features |
| Short Time Overload | 5 times rated power, maintain 5s | R 1%+0.05m |
| Insulation resistance | Apply 100V15V DC voltage between electrode and substrate, hold for 60 seconds, then measure | > 100 M |
| Withstand voltage | Apply AC voltage of maximum overload voltage between electrode and substrate at approx. 100V/S, hold for 605s | No breakdown or arc |
| Solderability | 2455 tin bath, hold 2s0.5s | At least 95% of electrode surface area covered with new solder |
| Resistance to Soldering Heat | 2605 tin bath, hold for 10s1s | R (0.5%+0.05m ), no visible damage |
| Bending test | Bending distance 2mm, hold time 60s5s | R0.5%+0.05m , no mechanical damage |
| Solvent resistance | Isopropanol (IPA) at 235 for 10 hours | No obvious damage to appearance |
| High Temperature Exposure | 1702, 1000H, stand for 1H, test resistance | R (1.0%+0.05m ) |
| Low Temperature Exposure | -552, 1000H, stand for 1H, test resistance | R (0.5%+0.05m ) |
| Rapid change of Temperature | -55 30 min ~ normal temp 5 min ~155 30 min, 1000 cycles | R (0.5%+0.05m ) |
| Load Life | 702, 1000 hours, rated power, 1.5 hours on / 0.5 hours off | R (1.0%+0.05m ) |
| Moisture with Load | 852, 85%3%RH, 1000 hours, rated power, 1.5 hours on / 0.5 hours off | R (1.0%+0.05m) |
TAPE PACKAGING DIMENSIONS
| Series | A (mm) | B (mm) | C (mm) | D (mm) | E (>mm) | T1 (mm) | T2 (mm) |
| 0805 | 1782.0 | 601.0 | 131.0 | 2.00.5 | >22 | 9.01 | / |
| 1206 | 1782.0 | 601.0 | 131.0 | 2.00.5 | >22 | 9.00.3 | 11.4 1.0 |
| 2512 | 1782.0 | 601.0 | 131.0 | 2.00.5 | >22 | 13.0 0.3 | 15.4 1.0 |
Reel Dimensions
| Series | D (mm) | C (mm) | E (mm) | T1 (mm) |
| 0805 | 1782.0 | 601.0 | 131.0 | 9.01 |
| 1206 | 1782.0 | 601.0 | 131.0 | 9.00.3 |
| 2512 | 1782.0 | 601.0 | 131.0 | 13.0 0.3 |
Label
Packaging Quantity: 0805/1206: 5000pcs/Reel, 2512: 4000pcs/Reel
Label shall mark the following items:
- Size
- Quantity
- LOT.NO.
- Manufacturers name
Recommended Reflow Soldering Profile
Solder: Sn96.5 / Ag3 / Cu0.5
Peak Temperature: 240~260, 10 sec
Pre-heating Zone: 150 to 200 , 9030 sec
Soldering Zone: 230 or higher, 3010 sec
Care Note
Storage: Store in a controlled environment (temperature 535, relative humidity 4575% RH). Avoid direct sunlight, moisture, dust, and harmful gases. Storage life: 1 year.
Handling: Avoid exceeding rated power. Handle with care to prevent damage. Do not touch the product with soldering tip during manual installation.
2509261615_RVR-HIDD25NR000F_C52016025.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
