Product Overview

The RSCM9544-1.8mH-3P is a three-phase common-mode filter inductor designed to meet specific electrical characteristics. Ruishen guarantees that the product conforms to the specifications outlined in this document. Customers are advised to verify product suitability for their designs and confirm any data changes with both parties. Orders placed without a signed acknowledgment are considered acceptance of these specifications.

Product Attributes

• Customer P/N: Not specified
• Item Name: (Three-phase common-mode filter inductor)
• Acknowledgment Number: S23112227
• Version No.: A0
• Manufacturer: Ruishen (implied by remark 1)
• Origin: Not specified
• Material: Not specified
• Color: Not specified
• Certifications: Not specified

Technical Specifications

Notes on Specifications:
1 Inductance is tested at 1KHZ 1V 30.
2 Heat rating current: The value of DC current when product temperature rise is T40 (Ta=25).
3 Saturation current: The value of DC current when the inductance decreases 30% of its initial value.
4 Special remind: Circuit design, component placement, frequency, cooling system and etc. all will affect the product temperature. Please verify the actual product temperature in the final application.
5 All data is tested on 25 ambient temperature.
6 Operating temperature range: -25 +125 (Including self-temperature rise).

Precautions

• The best assembly quality guarantee period of product: 12 months (From manufacture date). Storage condition: seal in packaging, temperature40, RH70%.
• If taking out for use, the remaining products should be sealed in plastic bags and preserved in accordance with the above conditions, to avoid oxidation of electrodes and affect soldering status.
• Do not keep products in unsuitable storage conditions, such as areas susceptible to high temperature, high humidity, dust or corrosion.
• Always handle products with care to avoid damage.
• Do not touch electrodes with bare hands directly, as oil secretions may inhibit soldering. Always ensure optimum conditions for soldering.
• When product will be used on a similar or new project to the original one, sometimes it might be unable to satisfy the specification due to different condition of usage.
• This product itself does not have any protective function in abnormal conditions, such as overload, high temperature, high voltage and etc.
• Hi-Pot test with higher voltage than spec value will damage insulation material and shorten its life.
• If using in potting compound, the product might be damaged, please consult with us.
• Please do not clean this product. If necessary, please consult with us.