Product Overview
The ROHM TC Series A Case tantalum capacitors are compact, high-capacitance chip components designed for low impedance applications. Featuring screening by thermal shock, these capacitors offer reliable performance in a small package. They are suitable for a wide range of electronic equipment.
Product Attributes
- Brand: ROHM
- Series: TC Series
- Case Style: A Case (3216-18 / 1206 size)
- Origin: Japan (implied by ROHM Co., Ltd.)
Technical Specifications
| Feature | Specification |
|---|---|
| Dimensions (mm) | L: 3.2 0.2, W1: 1.6 0.2, W2: 1.2 0.2, H: 1.6 0.2, S: 0.8 0.3 |
| Operating Temperature | -55C to +125C |
| Maximum Operating Temperature (no voltage derating) | +85C |
| Capacitance Tolerance | 20% |
| Marking | Polarity (bar on anode side), Rated DC voltage code, Capacitance code |
| Soldering Heat Resistance | Dip in solder bath at 26010C for 50.5s. No significant abnormality expected. |
| Moisture Resistance | 50012h at 602C / 90-95% RH. Within 10% of initial value (except for TCA0G107M8R: 20%). |
| Temperature Cycle Resistance | 5 cycles (-55C to +125C). Within 10% of initial value (except for TCA0G107M8R: 20%, TCA0J476M8R: 15%). |
| Adhesiveness | Terminal should not come off when 5N force is applied for 101s. |
| Resistance to Solvents | Dip in isopropyl alcohol for 305s at room temperature. Indication should be clear. |
| Solderability | 3/4 or more surface area of solder coated terminal dipped in soldering bath should be covered with new solder. (Pre-treatment: 1h boiling distilled water). |
| Vibration Resistance | 10 to 55 to 10Hz/min, 1.5mm amplitude for 2h each in X and Y directions. Measure value should not fluctuate. |
| Packaging Specifications (Standard) | Tape & Reel, 2000 pcs per reel. Reel dimensions: 180mm, 60mm hub, 9.0mm width. |
Standard Products List (Excerpt)
| Part No. | Rated Voltage (V) | Capacitance (F) | Tolerance (%) | Impedance 100kHz () |
|---|---|---|---|---|
| TCA0G106M8R | 6.3 | 10 | 20 | 1.0 |
| TCA0G226M8R | 6.3 | 22 | 20 | 1.3 |
| TCA0G107M8R | 4 | 100 | 20 | 0.5 |
| TCA1A226M8R | 10 | 22 | 20 | 0.6 |
| TCA1E105M8R | 25 | 1.0 | 20 | 12 |
Important Notices
Precaution on using ROHM Products: Products are designed for ordinary electronic equipment. For devices requiring extremely high reliability (medical, transport, aircraft, nuclear power, fuel controllers, car equipment, safety devices, etc.), consult with ROHM sales representative in advance. ROHM is not liable for damages incurred from use in Specific Applications without prior written agreement. Implement adequate safety measures including fail-safe design. Avoid use in special or extraordinary environments (liquids, direct sunlight, dust, corrosive gases, static electricity, electromagnetic waves, proximity to heat-producing components, sealing/coating, flux residue, dew condensation). Products are not radiation-proof. Verify final product characteristics and transient load performance. De-rate power dissipation based on ambient temperature. Confirm operation temperature is within specified range. ROHM is not liable for failure induced under deviant conditions.
Precaution for Mounting / Circuit board design: Highly active halogenous flux residue may affect performance. Reflow soldering is recommended for surface-mount products. Consult ROHM for flow soldering on surface-mount products.
Precautions Regarding Application Examples and External Circuits: Allow sufficient margin for external circuit constants considering variations. Application notes and reference designs are guidance only; use at your own responsibility.
Precaution for Electrostatic: Product is electrostatic sensitive. Take proper caution to prevent damage from electrostatic discharge. Grounding, isolation, ionizers, friction prevention, and temperature/humidity control are recommended.
Precaution for Storage / Transportation: Performance may deteriorate in environments exposed to sea winds, corrosive gases, extreme temperature/humidity, direct sunshine, condensation, or high static electricity. Solderability may degrade beyond recommended storage time; confirm before use. Store/transport cartons in the correct direction. Use products within the specified time after opening humidity barrier bag; baking may be required.
Precaution for Product Label: QR code is for ROHM internal use only.
Precaution for Disposition: Dispose of products properly using an authorized industry waste company.
Precaution for Foreign Exchange and Foreign Trade act: Consult ROHM for export of concerned goods.
Precaution Regarding Intellectual Property Rights: Information provided is for reference only and does not warrant non-infringement of third-party rights. ROHM is not liable for claims arising from combination of Products with other articles. No license is granted except as necessary for manufacturing/selling products containing the Products.
Other Precaution: Document may not be reprinted/reproduced without consent. Products may not be disassembled/modified without consent. Do not use Products for military purposes. Company/product names are trademarks.
General Precaution: Read and understand document contents before use. ROHM is not liable for failure arising from use against warnings. Information is current as of issuing date and subject to change. Confirm latest information with ROHM sales representative. Information is provided "as is"; ROHM does not warrant accuracy or error-freeness.
2304140030_ROHM-TCA0J336M8R_C307908.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
