<
>
Specifications
Mfr. Part #:
HIXD25NR450J
Package:
2512
Key Attributes
Model Number:
HIXD25NR450J
Product Description
Product Overview
This document outlines the Approval Specification for Metal Current Sensing Chip Resistors, Type HI XD. These resistors offer high power capabilities up to 3W, low TCR as 50ppm/, and are suitable for reflow and wave soldering. They feature Halogen-Free Epoxy, Lead-Free Plating, superior mechanical strength, and excellent high-frequency characteristics, complying with RoHS standards. Available in 2512, 1206, and 0805 series, they are designed for current sensing applications.
Product Attributes
- Brand: (Changzhou Pengke Electronics)
- Origin: China ()
- Material: Metal Alloy Resistance, Halogen Free Epoxy, Lead Free Plate
- Certifications: RoHS compliant
Technical Specifications
| Series | Size | Rated Power | Resistance Range | TCR | Operating Temp. Range | Tolerance | Max. Operating Voltage |
| 2512 DD/XD | 2512 | 2W/3W | 0m R 1m | 350ppm/ | -55 ~ +170 | 1%, 2%, 5% | (P*R) |
| 1m < R 2m | 100ppm/ | ||||||
| 2m < R 500m | 50 ppm/ | ||||||
| 1206 RC | 1206 | 1W | 0m R 2m | 350ppm/ | -55 ~ +170 | 1%, 2%, 5% | (P*R) |
| 2m < R 200m | 50 ppm/ | ||||||
| 0805 RE | 0805 | 0.5W | 5m R 15m | 50ppm/ | -55 ~ +170 | 1%, 2%, 5% | (P*R) |
| Series | L (mm) | W (mm) | T (mm) | A (mm) | Back Electrode A (mm) | Back Electrode B (mm) |
| 2512 DD | 6.40.20 | 3.20.20 | 0.80.20 | 2.00.20 (R4 m) | 5.80.1 | 1.50.1 |
| 2512 XD | 6.40.20 | 3.20.20 | 0.80.20 | 1.00.20 (R0.5 m) | 5.80.1 | 1.50.1 |
| 1206 RC | 3.20.20 | 1.60.20 | 0.70.20 (0m R<10m) | 0.60.20 | 2.950.1 | 10.1 |
| 0.450.20 (10m | ||||||
| 0805 RE | 2.00.10 | 1.250.10 | 0.50.20 | 0.350.20 | 1.40.1 | 0.580.1 |
| Project | Test Method | Specifications and Requirements |
| Short Time Overload | 5 times rated power, maintain 5s | R 1%+0.05m |
| Insulation resistance | Apply 100V15V DC voltage between electrode and substrate, hold for 60 seconds, then measure insulation resistance | > 100 M |
| Withstand voltage | An alternating current with an effective value of the maximum overload voltage is applied between the electrode and the substrate at a rate of approximately 100V/S, maintaining 605s | No breakdown or arc |
| Solderability | 2455 tin tank, hold 2s0.5s | At least 95% of surface area of electrode shall be covered with new solder |
| Resistance to Soldering Heat | 2605 tin tank, hold for 10s1s | R (0.5%+0.05m ), no visible damage |
| Bending test | Bending distance 2mm, hold time 60s5s | R0.5%+0.05m , no mechanical damage |
| Solvent resistance | Isopropanol (IPA) at 235 for 10 hours | No obvious damage to appearance |
| High Temperature Exposure | 1702, 1000H, stand for 1H, test the resistance value | R (1.0%+0.05m ) |
| Low Temperature Exposure | -552, 1000H, stand for 1H, test the resistance value | R (0.5%+0.05m ) |
| Rapid change of Temperature | -55 30 minutes ~ normal temperature 5 minutes ~155 30 minutes, 1000 cycles | R (0.5%+0.05m ) |
| Load Life | 702, 1000 hours, rated power 1.5 hours on / 0.5 hours off | R (1.0%+0.05m ) |
| Moisture with Load | 852, 85%3%RH, 1000 hours, rated power, 1.5 hours on / 0.5 hours off | R (1.0%+0.05m) |
2512101755_RVR-HIXD25NR450J_C53144992.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
