<
>
Specifications
Tolerance:
±5%
Voltage Rating:
630V
Capacitance:
220nF
Operating Temperature:
-40℃~+105℃
Dielectric Material:
Metallized Polyester
Mfr. Part #:
630MMG224J
Package:
Through Hole,P=10mm
Key Attributes
Model Number:
630MMG224J
Product Description
Product Overview
The RUBYCON 630MMG series metallized polyester film capacitors are designed for electronic equipment, adhering to JIS C 2319 standards. These capacitors utilize metallized polyester film as the dielectric and are suitable for applications requiring stable performance and reliability. They are manufactured by RUBYCON ELECTRONICS INC. in Japan.
Product Attributes
- Brand: RUBYCON
- Manufacturer: RUBYCON ELECTRONICS INC.
- Country of Origin: JAPAN
- Dielectric Material: Metallized polyester film
- Over Coat Resin: Epoxy resin (Powder)(Green)
- Certifications: UL94V-0 approval (for Over Coat Resin)
Technical Specifications
| Item | Specification | Details |
|---|---|---|
| Series | 630MMG | |
| Model Number | 630MMG224J | |
| Nominal Capacitance | 0.22F | Marked as '224' |
| Tolerance | 5% | Marked as 'J' |
| Rated Voltage | 630VDC | Marked as '2J' |
| Category Temperature Range | -40+105 (+85) | Voltage derating required beyond +85 |
| Dielectric Loss (tan ) | 0.01 max at 1kHz | |
| Voltage Proof | Rated Voltage 160% for 60s | |
| Insulation Resistance | 15,000M min (between terminals) | |
| Lead Wire | Tin Alloy Annealed copper wire (Sn+3Cu plating, 122m thickness) | |
| Construction Element | Metallized polyester film (Dielectric), Tin Alloy (Metal Spray), Resin (Under Coat), Epoxy resin (Over Coat) | |
| Marking on Product | Nominal capacitance, Tolerance, Rated voltage, Manufacturer's abbreviation ('R'), Series symbol ('G'), Lot number | Marking ink shall be black. |
| Appearance | Lead wire coated with solder completely. No remarkable flaw or pin-hole. | Visual check. |
| Resistance to solvent | No remarkable abnormality on appearance, marking legible. | Isopropyl alcohol. |
| Withstand voltage (between terminal and exterior cladding) | No abnormality. | 200% of rated voltage for 1 to 5 sec. |
| Insulation resistance (between terminal and exterior cladding) | 30,000M min | |
| Strength of termination | Tensile strength: 10N (10 1sec). Bending strength: 5N applied. | |
| Vibration proof | No electrical short circuit or disconnection ( 0.5ms). Stable connecting condition. No abnormality of appearance. | 10 to 55 Hz, 1.5 mm peak to peak amplitude, 2 hrs in each direction (6 hrs total). |
| Resistance to soldering heat | No remarkable abnormality. | Soldering bath: 2605C for 101sec. Soldering iron: 35010C for within 3 sec. (Not possible for Reflow Soldering) |
| Solderability | At least 95% of circumferential surface covered with new solder. | Solder: Sn/3.0Ag/0.5Cu, Flux: Rosin 10%, Solder temp: 2455C, Immersion time: 20.5 sec. |
| Low temperature resistance | No remarkable abnormality. | -402C for 500+24/0 hrs. |
| Heat resistance | No remarkable abnormality. | +1052C for 500+24/0 hrs. |
| Moisture resistance (steady) | No remarkable abnormality. | 90-95% RH, 402C for 500+24/0 hrs. Withstand voltage: 130% of rated voltage for 1 min. Insulation resistance: 4,500M min. |
| Load for moisture resistance | No remarkable abnormality. | 90-95% RH, 402C for 500+24/0 hrs, rated voltage applied. Withstand voltage: 130% of rated voltage for 1 min. Insulation resistance: 4,500M min. |
| Load for higher temperature | No remarkable abnormality. | 125% of rated voltage applied for 1000+48/0 hrs at 852C. Insulation resistance: 7,500M min. |
| Heat cycle | No remarkable abnormality. | -40C (30 min) to 105C (30 min), 100 cycles. Insulation resistance: 7,500M min. |
| Charge and discharge | Variation rate of capacitance: Within 5%. tan : 0.01 max. Insulation resistance: 7,500M min. | 10000 times pulse current application. |
| Cleaning resistance | No deterioration of performance, appearance, size, environment resistance, life etc. | Cleaning solvents: PAINALPHA ST-100S, ST-100SX. Cleaning temp: 40. Methods: Ultrasonic, Immersion, Steam cleaning (1 min each). |
| Permissible current by frequency | Refer to graph | Rated voltage: DC630V / 250Vrms (at 60Hz) |
| Permissible voltage by frequency | Refer to graph | Rated voltage: DC630V / 250Vrms (at 60Hz) |
| Self temperature rise | Within 15C | |
| Storage Condition | Indoor, <30C, <75% RH, no sudden temp changes, direct sunlight, or corrosive gas. | Storage time limit: 1 year from shipped date. |
| Soldering Operation (Iron) | Temp: 350, Duration: within 3 sec. Iron point diameter: within 3 mm. | |
| Packaging Quantity (Inner carton) | 1,000 PCS | |
| Dimensions (mm) | D: 20.0, L: 13.0, H: 10.5, W: 16.5, P: 10.0, d: 0.6 | (for 630MMG224J) |
2411280106_Rubycon-630MMG224J_C489118.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
