<
>
Specifications
Number of Resistors:
4
Number of Pins:
8
Tolerance:
±5%
Resistance:
10Ω
Power(Watts):
62.5mW
Temperature Coefficient:
±200ppm/℃
Mfr. Part #:
RTA02-4D100JTH
Package:
0402x4
Key Attributes
Model Number:
RTA02-4D100JTH
Product Description
RTA Series Thick Film Array Chip Resistors
The RTA series thick film array chip resistors are lead-free, halogen-free, and RoHS compliant, designed for general electronic applications. They offer reliable performance and are suitable for various general electronic purposes.
Product Attributes
- Brand: RALEC
- Certifications: RoHS compliant, Lead-free, Halogen-free
Technical Specifications
| Type | Rated Power | Max. Rated Voltage | Max. Overload Voltage | T.C.R. (ppm/) | Resistance Range | Number of Terminals | Number of Resistors | Rated Current (JUMPER 0) | Max. Resistance (JUMPER 0) |
|---|---|---|---|---|---|---|---|---|---|
| RTA02-2D (0402) | 1 W | 25V | 50V | 300 (1R<10), 200 (10R10M) | 1R<10, 10R10M | 4 | 2 | 1A | 25m MAX. |
| RTA02-4D (0402) | 1 W | 25V | 50V | 300 (1R<10), 200 (10R10M) | 1R<10, 10R10M | 8 | 4 | 1A | 25m MAX. |
| RTA02-8D (0402) | 1 W | 25V | 50V | 250 (10R10M) | 10R10M | 16 | 8 | 1A | 50m MAX. |
| RTA03-2D (0603) | 1 W | 50V | 100V | 200 (10R10M) | 10R10M | 4 | 2 | 1A | 50m MAX. |
| RTA03-4D (0603) | 1 W | 50V | 100V | 200 (22R470K), 200 (1R10M) | 22R470K, 1R10M | 8 | 4 | 1A | 25m MAX. |
| RTA02-2C (0402) | 1 W | 25V | 50V | 650 (3R10), 200 (10R<1M) | 3R10, 10R<1M | 4 | 2 | 1A | 50m MAX. |
| RTA02-4C (0402) | 1 W | 25V | 50V | 400 (1R<10), 200 (10R1M) | 1R<10, 10R1M | 8 | 4 | 1A | 50m MAX. |
Dimensions (mm)
| Type | L | W | H | L1 | L2 | P | Q |
|---|---|---|---|---|---|---|---|
| RTA02-2D (0402) | 1.000.10 | 1.000.10 | 0.300.05 | 0.150.10 | 0.250.10 | (0.67) | 0.330.10 |
| RTA02-4D (0402) | 2.000.10 | 1.000.10 | 0.400.10 | 0.200.10 | 0.250.10 | (0.50) | 0.300.10 |
| RTA02-8D (0402) | 4.000.20 | 1.600.10 | 0.400.10 | 0.300.15 | 0.300.10 | (0.50) | 0.250.10 |
| RTA03-2D (0603) | 1.600.15 | 1.600.15 | 0.450.10 | 0.300.15 | 0.300.15 | (0.80) | 0.600.10 |
| RTA03-4D (0603) | 3.200.20 | 1.600.15 | 0.500.10 | 0.300.15 | 0.300.15 | (0.80) | 0.500.10 |
| RTA02-2C (0402) | 1.000.10 | 1.000.10 | 0.300.10 | 0.180.10 | 0.250.10 | (0.50) | 0.300.10 |
| RTA02-4C (0402) | 2.000.10 | 1.000.10 | 0.400.10 | 0.150.10 | 0.250.10 | (0.50) | 0.300.10 |
Structure Diagram
D (Convex) Type: 1. Ceramic substrate, 2. 2nd Protective coating, 3. Bottom inner electrode, 4. Top inner electrode, 5. Resistive layer, 6. 1st Protective coating, 7. Terminal inner electrode, 8. Marking, 9. Ni plating, 10. Sn plating.
C (Concave) Type: 1. Ceramic substrate, 2. 2nd Protective coating, 3. Bottom inner electrode, 4. Top inner electrode, 5. Resistive layer, 6. 1st Protective coating, 7. Terminal inner electrode, 8. Marking, 9. Ni plating, 10. Sn plating.
Reliability Test Items
Electrical Performance Test
| Item | Conditions | Specifications |
|---|---|---|
| Temperature Coefficient of Resistance | (R2-R1)/R1(T2-T1)106 R1:Resistance at room temp., R2:Resistance at -55 or +125, T1:Room temp., T2:-55 or +125 | According to JIS-C5201-1 4.8 |
| Short Time Overload | Apply 2.5 times rated voltage for 5 sec, rest 30 min. | 0.5%, 1%: R=1.0%; 5%: R=2.0% (Ref. 3. Specification Table) |
| Insulation Resistance Test | Apply 100 VDC for 1 min between electrodes and protective layer/substrate. | 109 (According to JIS-C5201-1 4.6) |
| Dielectric Withstand Voltage | Apply 300 VAC for 1 min between electrodes. | No short circuit or burn. (According to JIS-C5201-1 4.7) |
| Intermittent Overload | 1 sec ON, 25 sec OFF, 10,000 cycles. | R=5.0% (Ref. 3. Specification Table, According to JIS-C5201-1 4.13) |
Mechanical Performance Test
| Item | Conditions | Specifications |
|---|---|---|
| Resistance to Solvent | Immerse in Isopropanol (20~25) for 50.5 min, rest 48 hrs. | R=0.5% (Ref. 3. Specification Table, According to JIS-C5201-1 4.29) |
| Solderability | Pre-treatment: 4 hrs aging at 105, 100% RH, 1.22105 pa. Test: Immerse in 2355 solder bath for 20.5 sec. | Soldered area > 95% (According to JIS-C5201-1 4.17) |
| Resistance to Soldering Heat | Test 1: Immerse in 260+5/-0 solder bath for 10 sec+1/-0, rest 60 min. Test 2: Immerse in 260+5/-0 solder bath for 30 sec+1/-0, then clean. | Test 1: R%=1.0%. Test 2: Soldered area > 95%, no underlying material visible at electrode edge. (Ref. 3. Specification Table, According to JIS-C5201-1 4.18) |
| Joint Strength of Solder (Bending Test) | Apply force to center of test board, D=5mm. | R%=1.0% (Ref. 3. Specification Table, According to JIS-C5201-1 4.33) |
Environmental Test
| Item | Conditions | Specifications |
|---|---|---|
| Resistance to Dry Heat | 10004 hr at 1555 oven, rest 1 hr. | 0.5%, 1%: R=1.0%; 5%: R=2.0% (Ref. 3. Specification Table, According to JIS-C5201-1 4.25) |
| Thermal Shock | -55 for 15 min, +125 for 15 min, 300 cycles, rest 60 min. | R=1.0% (Ref. 3. Specification Table, According to MIL-STD 202 Method 107) |
| Moisture Load Test | 402, 90-95% RH, rated voltage applied, 90 min ON, 30 min OFF, 1,000 hr, rest 60 min. | 0.5%, 1%: R=2.0%; 5%: R=3.0% (Ref. 3. Specification Table, According to JIS-C5201-1 4.24) |
| Load Life | 702 oven, rated voltage applied, 90 min ON, 30 min OFF, 1,000 hrs, rest 60 min. | 0.5%, 1%: R=2.0%; 5%: R=3.0% (Ref. 3. Specification Table, According to JIS-C5201-1 4.25) |
Plating Thickness
- Nickel Layer (Ni): 2m
- Pure Tin Layer (Sn): 3m (Matte tin)
Technical Application Notes
- Recommended Soldering Conditions:
(a) Lead Free IR-Reflow Soldering Profile (J-STD-020 compliant): Max. component temp. 260+5/-0, 10 sec.
(b) Soldering Iron Method: 35010 within 3 seconds. - Recommended Land Pattern Design (For Reflow Soldering): Design considerations for resistance value changes due to soldering area and amount.
- Environmental Precautions: This product is for general electronic use. RALEC is not responsible for damages or losses in special environments. Confirmation with RALEC is required for applications in high temp/humidity, corrosive atmospheres (Cl2, H2S, NH3, SO2, NO2), unverified liquids, unverified sealing/coating materials, or when using water-soluble cleaning agents post-soldering.
- Transient Overload Precautions: Be aware of potential function loss due to transient overloads. Avoid applying transient currents exceeding product specifications.
- Handling and Operation Precautions: Protect resistor edges and coating from mechanical stress. Handle PCBs carefully to avoid bending stress on resistors. Operate within rated power limits to prevent damage from overheating. Consider pulse load impacts and implement fail-safe designs. Evaluate and confirm in your actual application.
Storage and Handling Conditions
- Storage: 2 years under 255, 6015% RH.
- Avoid adverse environments: sea breeze, corrosive gases (Cl2, H2S, NH3, SO2, NO2), direct sunlight, condensation.
- Handle boxes with correct orientation; avoid dropping or squeezing to prevent damage to electrodes or body.
2411221110_RALEC-RTA02-4D100JTH_C102626.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
