<
>
Specifications
Current - Saturation (Isat):
8.5A
Mfr. Part #:
PSPMAF0515-1R0M-CGF-AP
Package:
SMD,5.7x5.2mm
Key Attributes
Model Number:
PSPMAF0515-1R0M-CGF-AP
Product Description
Product Overview
The PSPMAF0515-1R0M-CGF-AP is an SMD Inductor designed for general electronic equipment applications. It offers reliable performance and is suitable for use in devices such as AV equipment, communication devices, home appliances, entertainment devices, computer equipment, personal devices, office equipment, and measurement equipment. This inductor is manufactured by PROD TECHNOLOGY CO., LTD. and E-LIVEN TECHNOLOGY CO., LTD. in Taiwan.
Product Attributes
- Brand: PROD TECHNOLOGY CO., LTD. / E-LIVEN TECHNOLOGY CO., LTD.
- Origin: Taiwan
- Product Type: SMD Inductor
- Part Number: PSPMAF0515-1R0M-CGF-AP
Technical Specifications
| Item | P/N | Test Instrument | Product | Test Frequency | Dimensions (mm) A | Dimensions (mm) B | Dimensions (mm) C | Dimensions (mm) D | Dimensions (mm) E | DCR (m) Max @ 25 | Inductance (H) Lo @ 25 | Tolerance | Typical Heat Rating DC Current (A) (Idc) | Typical Saturation DC Current (A) (Isat) |
| SMD Inductor | PSPMAF0515-1R0M-CGF-AP | Zentech-3305 / Zentech502BC | SMD Inductor | 100 kHz / 1.0V | 5.70.5 | 5.20.3 | 1.30.2 | 2.50.3 | 1.00.5 | 7 | 1.00 | 20% | 8.5 | 24.0 |
Reliability Tests
Mechanical Reliability Test
| Test | Specification & Requirement | Method Used |
| Solderability | Surface of terminal/pin tested shall be covered with new solder by 95% | Solder heat proof: Preheating: 180 10 90 seconds, Soldering: 255 5 for 3 1 sec |
| Shock | Inductance change within 5% Without mechanical damage | Without Drop down with 981m/s2 (100G) shock attitude upon a rubber block method shock testing machine, 3 tests. |
| Vibration | Inductance change within 5% Without mechanical damage | Vibration frequency: 10Hz to 55Hz to 10Hz 60 seconds cycle, Vibration time: 2 hours |
Endurance Reliability Test
| Test | Specification & Requirement | Method Used |
| Thermal Shock | Inductance change within 5% Without mechanical damage | -25, (30 mins) -> room temp. (5 mins) -> 125, (30 mins) -> room temp. (5 mins), 100 cycles |
| Heat Resistance | Inductance change within 5% Without mechanical damage | Apply IDC current @ 85 ambient, Duration: 1000 hrs |
| Humidity Resistance | Inductance change within 5% Without mechanical damage | Apply IDC current @ 60 ambient, Humidity: 90~95, Duration: 1000 hrs |
| Low Temp. Storing | Inductance change within 5% Without mechanical damage | Storing Temp. -25 2 for total 1,000 +4/-0 hours |
| High Temp. Storing | Inductance change within 5% Without mechanical damage | Storing Temp. 125 2 for total 1,000 +4/-0 hours |
Packing
Standard Quantity for Packaging: 3,500 pcs/Reel (Carrier Tapeing Reel & Carrier Materials: Paper/Plastics)
Announcements (Product Precautions)
When using this product, please pay attention to the following:
- Product shelf life is 12 months. Storage conditions: Temperature 5~40, Humidity within 10~80%RH. Exceeding the shelf life may cause oxidation of the product terminals.
- Do not use or store in extreme environments (high salt, strong acid, strong alkali, strong radiation, etc.).
- Preheat the product before soldering. The temperature difference between preheating and soldering is recommended to be within 150.
- If the product needs to be disassembled and resoldered after soldering, please follow the conditions specified in the datasheet. Excessive heating temperature and repeated disassembly may lead to product failure.
- After the product is soldered to the circuit board, do not apply residual stress to the inductor due to overall or local deformation of the circuit board, which may cause the inductor to crack, detach, and fail.
- Do not contact the product with liquids such as cleaning agents or alcohol, as this may corrode the product body and lead to product failure.
- As the product's temperature rises with increasing current when powered on, be sure to consider margin in the design.
- Excessive static electricity can cause permanent damage to the product; please pay attention to static protection.
- Do not touch any part of the product during the power-on process to prevent electric shock.
- As this product is a magnetic product, please consider the mutual influence between surrounding components and this product during design.
- This product is suitable for general electronic equipment such as AV equipment, communication equipment, home appliances, entertainment devices, computer equipment, personal devices, office equipment, measurement equipment, industrial robots, etc., and these general electronic equipment must be used in conventional operating and usage environments.
- For applications requiring high safety and reliability, or where product failure could lead to equipment malfunction, incorrect operation, poor performance, or endanger human life, physical safety, property, or have a significant negative impact on society, please communicate with our company before design and use. The design user will not be held responsible for any consequences arising from use without our company's written consent. Special uses include, but are not limited to, the following list: 1. equipment, 2. Transportation equipment (automobiles, rail transit products, ships, etc.), 3. Aviation and aerospace equipment, 4. Power generation control equipment, 5. Nuclear power related equipment, 6. Explosion ignition control equipment, 7. Traffic control equipment, 8. Equipment related to national defense security, 9. Disaster relief equipment, 10. Various safety certification equipment, 11. Emergency rescue equipment, 12. Other equipment designated as special purpose.
2410121327_PROD-Tech-PSPMAF0515-1R0M-CGF-AP_C436580.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
