Product Overview
The PSPMAF0615-2R2M-CGF-AP is a high-quality SMD Inductor designed for general electronic equipment. It offers reliable performance and is suitable for a wide range of applications including AV equipment, communication devices, home appliances, entertainment systems, computer equipment, personal devices, office equipment, measurement equipment, and industrial robots. This inductor is manufactured by PROD TECHNOLOGY CO., LTD. and E-LIVEN TECHNOLOGY CO., LTD. in Taiwan. It is crucial to verify part temperature in the end application as it is affected by various design and environmental factors.
Product Attributes
- Brand: PROD TECHNOLOGY CO., LTD. / E-LIVEN TECHNOLOGY CO., LTD.
- Origin: Taiwan
- Product Type: SMD Inductor
Technical Specifications
| Item | P/N | Inductance (H) | Tolerance | DCR (m) Max | Heat Rating DC Current (A) (Idc) Typical | Saturation DC Current (A) (Isat) Typical | Dimensions (mm) A | Dimensions (mm) B | Dimensions (mm) C | Dimensions (mm) D | Dimensions (mm) E |
| SMD Inductor | PSPMAF0615-2R2M-CGF-AP | 2.20 | 20% | 55.0 | 4.5 | 6.5 | 7.00.5 | 6.60.3 | 1.3 0.2 | 3.00.3 | 1.80.5 |
Electrical Characteristics
| Item | Test Frequency | Ambient Temperature | Notes |
| DCR | 100 kHz / 1.0V | @ 26 | All test Data is referenced to 25 ambient |
| Inductance | 100 kHz / 1.0V | @ 26 | Typical Heat Rating DC Current would cause an approximately T of 40 |
| Typical Saturation DC Current would cause Lo to drop approximately 20% | |||
| Operation Temperature Range | -55 ~ 125 | ||
| The Part temperature (ambient + T) should not exceed 125 under worst case operating conditions. |
Mechanical Reliability Test
| Test | Specification & Requirement | Method Used |
| Solderability | The surface of terminal/pin tested shall be covered with new solder by 95% | Solder heat proof: Preheating: 180 10 90 seconds Soldering: 255 5 for 3 1 sec |
| Shock | Inductance change within 5% Without mechanical damage | Without Drop down with 981m/s2 (100G) shock attitude upon a rubber block method shock testing machine, 3 tests. |
| Vibration | Inductance change within 5% Without mechanical damage | Vibration frequency: 10Hz to 55Hz to 10Hz 60 seconds cycle Vibration time: 2 hours |
Endurance Reliability Test
| Test | Specification & Requirement | Method Used |
| Thermal Shock | Inductance change within 5% Without mechanical damage | -25, (30 mins) -> room temp. (5 mins) -> 125, (30 mins) -> room temp. (5 mins) 100 cycles |
| Heat Resistance | Inductance change within 5% Without mechanical damage | Apply IDC current @ 85 ambient Duration: 1000 hrs |
| Humidity Resistance | Inductance change within 5% Without mechanical damage | Apply IDC current @ 60 ambient Humidity: 90~95 Duration: 1000 hrs |
| Low Temp. Storing | Inductance change within 5% Without mechanical damage | Storing Temp. -25 2 for total 1,000 +4/-0 hours |
| High Temp. Storing | Inductance change within 5% Without mechanical damage | Storing Temp. 125 2 for total 1,000 +4/-0 hours |
Packing
| Item | Carrier Tapeing Reel & Carrier Materials | Standard Quantity |
| SMD | (PAPER PLASTICS) UNIT : (mm) | 2000 pcs/Reel |
Recommended Soldering Temp. Graph
Graph A: 260
Graph B: 230
Graph D: 150
Graph E: 60~240 Sec
Explanation of Part Numbers: P S P M A F 0 6 1 5 - 2 R 2 M - C G F - A P (Serial Codes, Size, Inductance, Description)
2410121327_PROD-Tech-PSPMAF0615-2R2M-CGF-AP_C436583.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
