<
>
Specifications
Current - Saturation (Isat):
7.6A
Mfr. Part #:
PSPMAF0415-R47M-CGF-AP
Package:
SMD,4.5x4.1mm
Key Attributes
Model Number:
PSPMAF0415-R47M-CGF-AP
Product Description
Product Overview
The PSPMAF0415-R47M-CGF-AP is a high-quality SMD Inductor designed for general electronic equipment applications. It offers reliable performance and is suitable for use in a wide range of devices including AV equipment, communication devices, home appliances, entertainment systems, computer equipment, personal devices, office equipment, and measuring instruments. This inductor is built to withstand standard operating conditions and is manufactured by PROD TECHNOLOGY CO., LTD. and E-LIVEN TECHNOLOGY CO., LTD.
Product Attributes
- Brand: PROD TECHNOLOGY CO., LTD. / E-LIVEN TECHNOLOGY CO., LTD.
- Origin: Taiwan
- Product Type: SMD Inductor
- Part Number: PSPMAF0415-R47M-CGF-AP
- Revision: 1.0
- Date: 2016-1-13
Technical Specifications
| Item | P/N | Product | Test Frequency | Test Instrument | Inductance (H) | Tolerance | DCR (m) @ 25 MAX | Typical Heat Rating DC Current (Idc) (A) | Typical Saturation DC Current (Isat) (A) | Dimensions (mm) A | Dimensions (mm) B | Dimensions (mm) C | Dimensions (mm) D | Dimensions (mm) E |
| SMD Inductor | PSPMAF0415-R47M-CGF-AP | SMD Inductor | 100 kHz / 1.0V | Zentech-3305 / Zentech502BC | 0.47 | 20% | 17.0 | 8 | 7.6 | 4.450.3 | 4.10.2 | 1.3 0.2 | 2.00.2 | 0.80.3 |
Reliability Tests
| Test Type | Specification & Requirement | Method Used |
| Solderability | Surface covered with new solder by 95% | Solder heat proof: Preheating: 180 10 90 seconds; Soldering: 255 5 for 3 1 sec |
| Shock | Inductance change within 5%; Without mechanical damage | Without Drop down with 981m/s2 (100G) shock on a rubber block method; 3 tests |
| Vibration | Inductance change within 5%; Without mechanical damage | Vibration frequency: 10Hz to 55Hz to 10Hz; 60 seconds cycle; Vibration time: 2 hours |
| Thermal Shock | Inductance change within 5%; Without mechanical damage | -25 (30 mins) -> room temp. (5 mins) -> 125 (30 mins) -> room temp. (5 mins); 100 cycles |
| Heat Resistance | Inductance change within 5%; Without mechanical damage | Apply IDC current @ 85 ambient; Duration: 1000 hrs |
| Humidity Resistance | Inductance change within 5%; Without mechanical damage | Apply IDC current @ 60 ambient; Humidity: 90~95; Duration: 1000 hrs |
| Low Temp. Storing | Inductance change within 5%; Without mechanical damage | Storing Temp. -25 2 for total 1,000 +4/-0 hours |
| High Temp. Storing | Inductance change within 5%; Without mechanical damage | Storing Temp. 125 2 for total 1,000 +4/-0 hours |
Packing Information
Carrier: Tape & Reel (Paper/Plastics)
Unit: mm
Standard Quantity per Reel: 3,500 pcs
Recommendations and Warnings
Product Precautions ()
- Product shelf life is 12 months. Storage conditions: temperature 5~40, humidity within 10~80%RH. Exceeding the shelf life may cause oxidation of product terminals.
- Do not use or store in extreme environments (high salt, strong acid, strong alkali, strong radiation, etc.).
- Preheat the product before soldering. The temperature difference between preheating and soldering is recommended to be within 150.
- When re-disassembling and re-soldering after product soldering, follow the conditions specified in the datasheet. Excessive heating temperature and repeated disassembly may lead to product failure.
- After soldering the product to the circuit board, be careful not to apply residual stress to the inductor due to overall or local deformation of the circuit board. This may cause the inductor to crack, detach, and fail.
- Do not allow the product to come into contact with cleaning agents, alcohol, or other liquids, as this may corrode the product body and lead to failure.
- The product temperature will rise with increasing current after power-on. Ensure sufficient margin is considered during design.
- Excessive static electricity can cause permanent damage to the product. Pay attention to static protection.
- Do not touch any part of the product during power-on to prevent electric shock.
- As a magnetic product, consider potential mutual influences between surrounding components and this product during design.
- This product is suitable for general electronic equipment such as AV equipment, communication equipment, home appliances, entertainment equipment, computer equipment, personal equipment, office equipment, measuring equipment, industrial robots, etc., under normal operating and usage conditions.
- For applications requiring high safety and reliability, or where product failure could endanger life, limb, or property, or cause significant adverse social impact, please contact the company before designing and using. The company will not bear any responsibility for consequences arising from use without written consent. Special uses include, but are not limited to: equipment, transportation equipment (automobiles, rail transport, ships, etc.), aerospace equipment, power generation control equipment, nuclear power related equipment, explosion ignition control equipment, traffic control equipment, national defense security equipment, disaster relief equipment, various safety standard equipment, emergency rescue equipment, and other equipment deemed for special use.
Recommended Soldering Temperature Graph
A: 260
B: 230
C: 10 Sec
D: 150
E: 60~240 Sec
2410121327_PROD-Tech-PSPMAF0415-R47M-CGF-AP_C436579.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
