<
>
Specifications
Current - Saturation (Isat):
2.5A
Mfr. Part #:
PSPMAA0603H-330M-ANF
Package:
SMD,7.1x6.6mm
Key Attributes
Model Number:
PSPMAA0603H-330M-ANF
Product Description
Product Overview
The PSPMAC0603H-330M-ANF is a Surface Mount Device (SMD) Inductor designed for general electronic equipment. It is suitable for applications such as AV equipment, communication devices, home appliances, entertainment systems, computer equipment, personal devices, office equipment, measurement equipment, and industrial robots. This component is manufactured by PROD TECHNOLOGY CO., LTD. and E-LIVEN TECHNOLOGY CO., LTD.
Product Attributes
- Brand: PROD TECHNOLOGY CO., LTD. / E-LIVEN TECHNOLOGY CO., LTD.
- Origin: Taiwan
Technical Specifications
| Item | P/N | Test Instrument | Product | Test Frequency | Inductance (H) | Tolerance | Irms (A) Max. | Isat (A) Max. | DCR (m) Typical | DCR (m) MAX |
| SMD Inductor | PSPMAC0603H-330M-ANF | Zentech-3305 / Zentech502BC | SMD Inductor | 100 kHz / 1.0V | 33.00 | 20% | 2 | 3 | 210.0 | 250.0 |
Dimensions (mm)
| Dimensions | A | B | C | D | E | G | H | I |
| 0603 | 6.6 0.3 | 7.1 0.3 | 3.0 MAX | 3.0 0.3 | 1.6 0.5 | 7.4 Typ | 3.7 Typ | 3.5 Typ |
Carrier Tapeing Reel & Carrier Materials (Paper Plastics)
| Unit (mm) | A | B | Ao | Bo | Ko | W | P |
| 1000 | 17 | 6.9 0.1 | 7.6 0.1 | 4.3 0.1 | 16 | 12 |
Explanation of Part Numbers
PSPMAC0603H-330M-ANF
- Size: 0603
- Inductance Code: 330 (33.0 H)
- Description: M
- Serial Codes: ANF
Notes
- All test data is referenced to 25 ambient.
- Typical Heat Rating DC Current would cause an approximately T of 40.
- Typical Saturation DC Current would cause Lo to drop approximately 35%.
- Operation Temperature Range: -40 ~ 125.
- The Part temperature (ambient + T) should not exceed 125 under worst-case operating conditions.
- Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application.
Recommended Land Pattern
(Schematic Diagram)
Marking
Inductor Contents ONE (1) Set(s) of Coil
DC/AC Current Shall Be Introduced By Any One of Two Pads
Recommended Soldering Temp. Graph
| A | B | C | D | E | |
| Temperature (C) | 260 | 230 | 150 | ||
| Time (Sec) | 10 Sec | 10 Sec | 60~240 Sec |
Mechanical Reliability Test
| Specification & Requirement | Method Used |
| Solderability: The surface of terminal/pin tested shall be covered with new solder by 95% | Solder heat proof: Preheating: 180 10 90 seconds; Soldering: 255 5 for 3 1 sec |
| Shock: Inductance change within 5% Without mechanical damage | Without Drop down with 981m/s2 (100G) shock upon a rubber block method shock testing machine, 3 tests. |
| Vibration: Inductance change within 5% Without mechanical damage | Vibration frequency: 10Hz to 55Hz to 10Hz 60 seconds cycle; Vibration time: 2 hours |
Endurance Reliability Test
| Specification & Requirement | Method Used |
| Thermal Shock: Inductance change within 5% Without mechanical damage | -25, (30 mins) -> room temp. (5 mins) -> 125, (30 mins) -> room temp. (5 mins); 100 cycles |
| Heat Resistance: Inductance change within 5% Without mechanical damage | Apply IDC current @ 85 ambient; Duration: 1000 hrs |
| Humidity Resistance: Inductance change within 5% Without mechanical damage | Apply IDC current @ 60 ambient; Humidity: 90~95; Duration: 1000 hrs |
| Low Temp. Storing: Inductance change within 5% Without mechanical damage | Storing Temp. -25 2 for total 1,000 +4/-0 hours |
| High Temp. Storing: Inductance change within 5% Without mechanical damage | Storing Temp. 125 2 for total 1,000 +4/-0 hours |
Testing Report
| No. | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | DCR Max (m) | Inductance L(0)20% (H) | Result |
| 1 | 6.61 | 7.41 | 2.89 | 3.03 | 1.65 | 205.30 | 32.16 | PASS |
| 2 | 6.69 | 7.43 | 2.95 | 3.06 | 1.62 | 205.60 | 32.25 | PASS |
| 3 | 6.65 | 7.46 | 2.94 | 3.16 | 1.64 | 205.40 | 32.65 | PASS |
| 4 | 6.63 | 7.41 | 2.96 | 3.12 | 1.63 | 205.90 | 32.24 | PASS |
| 5 | 6.62 | 7.42 | 2.91 | 3.05 | 1.69 | 205.10 | 32.59 | PASS |
| 6 | 6.65 | 7.43 | 2.92 | 3.08 | 1.61 | 205.30 | 32.58 | PASS |
| 7 | 6.61 | 7.45 | 2.93 | 3.14 | 1.62 | 205.10 | 32.16 | PASS |
| 8 | 6.63 | 7.41 | 2.89 | 3.12 | 1.65 | 205.40 | 33.16 | PASS |
| 9 | 6.64 | 7.40 | 2.86 | 3.16 | 1.64 | 205.60 | 33.18 | PASS |
| 10 | 6.62 | 7.42 | 2.88 | 3.19 | 1.63 | 205.50 | 32.64 | PASS |
| X | 6.64 | 7.42 | 2.91 | 3.11 | 1.64 | 205.42 | 32.56 | |
| R | 0.08 | 0.06 | 0.10 | 0.16 | 0.08 | 0.80 | 1.02 |
Product Precautions
When using this product, please pay attention to the following:
- The product's shelf life is 12 months. Storage conditions: temperature 5~40, humidity within 10~80%RH. Exceeding the shelf life may cause oxidation of the product terminals.
- Do not use or store in extreme environments (high salt, strong acids, strong alkalis, strong radiation, etc.).
- Please preheat before soldering the product. The temperature difference between preheating and soldering temperature is recommended to be controlled within 150.
- When reworking after soldering, please follow the specified conditions in the datasheet. Excessive heating temperature and repeated disassembly may cause product failure.
- After soldering the product to the circuit board, be careful not to apply residual stress to the inductor due to overall or local deformation of the circuit board, which may cause the inductor to crack, fall off, and result in failure.
- Please do not let the product come into contact with liquids such as cleaning agents or alcohol, as this will corrode the product body and lead to product failure.
- The temperature of the product will rise with increasing current when energized. Please be sure to consider margins in the design.
- Excessive static electricity can cause permanent damage to the product. Please pay attention to static protection.
- Do not touch any part of the product during power-on to prevent electric shock.
- As a magnetic product, please consider the mutual influence between surrounding components and this product during design.
- This product is suitable for general electronic equipment, such as: AV equipment, communication equipment, home appliances, entertainment equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots, etc. And such general electronic equipment must be used under normal operating and usage conditions.
- For special applications requiring high safety and reliability, or where product failure may cause equipment malfunction, misoperation, poor operation, etc., endangering human life, body, property safety, and having a significant negative impact on society, please communicate with our company before designing and using. The designer shall not be liable for any consequences arising from the use of this product without our company's written consent. Special uses include, but are not limited to, the following list: 1 equipment, 2 Transportation equipment (automobiles, rail transit products, ships, etc.), 3 Aviation, aerospace equipment, 4 Power generation control equipment, 5 Nuclear power related equipment, 6 Explosion ignition control equipment, 7 Traffic control equipment, 8 Equipment related to national defense security, 9 Disaster prevention and relief equipment, 10 Various safety equipment, 11 Emergency rescue equipment, 12 Other equipment identified as special use.
2410121435_PROD-Tech-PSPMAA0603H-330M-ANF_C705337.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
